Triumph TR6 Rear Drum Brakes

Order your Triumph TR6 Rear Drum Brakes ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID600158

Prices displayed in:
4.5 out of 5 starsRead 2 Review(s)Rate and Review this Product
GWC1154
In stock
£17.50 ex VAT£21.00 inc UK VAT
Quantity
Rate and Review this Product
18G9065
Out of stock, expected soon Dec 05, 2024. Add to cart and Back Order
£5.85 ex VAT£7.02 inc UK VAT
Quantity
50
These brake drums have a central hole with a standard size of 70.5mm in order for them to fit numerous models across the Triumph range. If the hole is too large for your Triumph model, any potential spigotting effect will be neutralised by the tightening of the locating screws.

The stud holes are drilled to a PCD of 114.3mm (as original) and are suitable for fitting with standard pull through 7/16 inch studs as used on all but early Girling axled cars. The hubs on Girling axles are fitted with screw in, front mounted studs. These studs, which feature a slight shoulder, may not allow the drum to sit flat on the hub. This can be resolved by drilling the hub and effectively converting it to use the later pull through studs.

The Locating Screw Holes are drilled on a PCD of 100mm (as original).
Qty Req-2
Rate and Review this Product
210578
In stock
£27.50 ex VAT£33.00 inc UK VAT
Quantity
52
Just like the extremely rare factory optional Al-Fin brake drums, these reproduction finned drums not only look good but substantially reduce brake fade on hard driven cars. They feature strong finned aluminium alloy shells with iron inserts.

These brake drums have a central hole with a standard size of 70.5mm in order for them to fit numerous models across the Triumph range. If the hole is too large for your Triumph model, any potential spigotting effect will be neutralised by the tightening of the locating screws.

The Stud Holes are drilled on a PCD of 114.3mm (as original) and suitable for standard "pull through" 7/16” studs as used on all but early Girling axled cars. The hubs on Girling axles are fitted with screw in, front mounted studs. These studs, which feature a slight shoulder, may not allow the drum to sit flat on the hub. This can be resolved by drilling the hub and effectively converting it to use the later pull through studs.

The Locating Screw Holes are drilled on a PCD of 100mm (as original).
Qty Req-1
Rate and Review this Product
210578UR
Out of stock, expected soon Jan 31, 2025. Add to cart and Back Order
£390.00 ex VAT£468.00 inc UK VAT
Quantity

Related Items

Brake and Clutch Fluid - DOT 3 - 1L Synthetic - GBF103 - TRW
Brake and Clutch Fluid - DOT 3 - 1L Synthetic - GBF103 - TRW
£7.60 ex VAT£9.12 inc UK VAT
Brake and Clutch Cleaner - 400ml - GBF901 - Aftermarket
Brake and Clutch Cleaner - 400ml - GBF901 - Aftermarket
Only Available for Delivery by UPS to Mainland United Kingdom Destinations
£4.60 ex VAT£5.52 inc UK VAT
Silicone Brake or Clutch Fluid - DOT 5 - 1 Litre - RX1326 - Automec
Silicone Brake or Clutch Fluid - DOT 5 - 1 Litre - RX1326 - Automec
£41.50 ex VAT£49.80 inc UK VAT
Silicone Brake or Clutch Fluid - DOT 5 - 500ml - RX1327 - Automec
Silicone Brake or Clutch Fluid - DOT 5 - 500ml - RX1327 - Automec
£24.00 ex VAT£28.80 inc UK VAT
Red Rubber Grease Sachet - 50gms - 514578P
Red Rubber Grease Sachet - 50gms - 514578P
£1.95 ex VAT£2.34 inc UK VAT
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Great selection of genuine and aftermarket Land Rover spares" Customer Comment
Product Description

Triumph TR6 Rear Drum Brakes

Review: Even(Norway) Submitted: 15/03/2020

Overall5 out of 5 stars.
verified

Subject
Its the details that makes it!

Did this item work well with your project? What vehicle type are you using this for?
Very good for my project car. I own a 71 tr6. Fast shipping too.