Triumph TR4-250 Escutcheons, Decals and Switches

Order your Triumph TR4-250 Escutcheons, Decals and Switches ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID200501

Prices displayed in:
59
Expansion nut for No. 6 self tapping screw and assembly in 21/64" square hole.
Qty Req-2
Rate and Review this Product
FC2803
In stock
Most express orders ship today!
£1.05 ex VAT£1.26 inc UK VAT
Quantity
60
How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1
4.5 out of 5 starsRead 2 Review(s)Rate and Review this Product
611012
In stock
Most express orders ship today!
£2.75 ex VAT£3.30 inc UK VAT
Quantity
61
How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
611011
In stock
Most express orders ship today!
£3.20 ex VAT£3.84 inc UK VAT
Quantity
62
3 position - off/side/main

How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1
Rate and Review this Product
611014
In stock
Most express orders ship today!
£2.35 ex VAT£2.82 inc UK VAT
Quantity
N.I.
3 position - side/main/dip

How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1
Rate and Review this Product
611400
In stock
Most express orders ship today!
£3.65 ex VAT£4.38 inc UK VAT
Quantity
63
3 position

How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1
Rate and Review this Product
611013
In stock
Most express orders ship today!
£2.60 ex VAT£3.12 inc UK VAT
Quantity
Rate and Review this Product
142579
Out of stock, expected soon Dec 19, 2024. Add to cart and Back Order
£60.50 ex VAT£72.60 inc UK VAT
Quantity
64
TR6 commissio no. CP series cars are fitted with a floor mountied, foot operated headlamp dip/main beam change-over switch.
All TR6s after commission no. CR1 had the headlamp dip on the lighting switch mounted on the steering column.
Qty Req-1, Model-TR4A, TR5, TR250 LHD, Item Info 2-lighting
Rate and Review this Product
141858
This part has been superseded
Use 159358
64
Replacement screws required for this item are M4 threaded.
Qty Req-1, Item Info 2-lighting - alternative
Rate and Review this Product
159358
In stock
Most express orders ship today!
£80.00 ex VAT£96.00 inc UK VAT
Quantity
65
Please note the threads for this item is M4, therefore the original type will not fit.

Positive + : Wire Color Blue/ Red
Turn Left: Negative -: Wire color Green/Orange
Turn Right: Negative -: Wire color Green/White

New Line - Lucas Brand - The brand's famous green boxes have been a familiar feature of garages across the globe for decades. That’s because Lucas have always provided the parts that mechanics trust and keep close at hand to get the job done. It’s still true today. The Lucas portfolio covers premium quality products for automotive, motorcycle and home use.

Lucas products are driven by engineering excellence and a spirit of innovation that’s ensured our continued global success. The brand's reputation is built on an extensive range, exceptional technical durability and endurance, and outstanding quality.

Lucas has been providing all this for over 135 years - and we’re still growing. That’s why the brand has been continuously trading longer than any other automotive component brand in the world.
Qty Req-1, Model-TR4, TR4A, TR5, TR250, Item Info 2-alternative
4 out of 5 starsRead 1 Review(s)Rate and Review this Product
158966PLUCAS
In stock
Most express orders ship today!
£47.00 ex VAT£56.40 inc UK VAT
Quantity
Rate and Review this Product
TP402
In stock
Most express orders ship today!
£0.55 ex VAT£0.66 inc UK VAT
Quantity
Rate and Review this Product
139793
In stock
Most express orders ship today!
£52.50 ex VAT£63.00 inc UK VAT
Quantity
Rate and Review this Product
147280
Out of stock, expected soon Dec 04, 2024. Add to cart and Back Order
£46.50 ex VAT£55.80 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
147281
In stock
Most express orders ship today!
£37.50 ex VAT£45.00 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
609792
Out of stock, expected soon Dec 20, 2024. Add to cart and Back Order
£9.15 ex VAT£10.98 inc UK VAT
Quantity
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Always easy to find what I need - clear diagrams useful as I'm buying unusual bits for 1950s Fibreglass specials" Customer Comment
Product Description

Triumph TR4-250 Escutcheons, Decals and Switches