Triumph TR4-250 Front Bumper and Fittings

Order your Triumph TR4-250 Front Bumper and Fittings ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID200766

Prices displayed in:
N.I.
Mirror finish, polished stainless steel - similar appearance to chrome, but they never rust! Superb value when compared to standard bumpers. Includes Front & Rear bumpers with overriders & fittings. Made on a low-volume press tool and hand finished to ensure any matching joints are aligned as a car set. Expect to make minor adjustments when installing to allow for manufacturing and vehicle variances (loosely assemble and trial fit prior to final tightening). Made from high grade 304 spec stainless steel, with 20% being pure chrome. Internal surfaces are acid etch primed & painted for an original appearance.
Qty Req-1, Model-TR4
Rate and Review this Product
RF4229
In stock
£820.00 ex VAT£984.00 inc UK VAT
Quantity
N.I.
Please note: Only the later 142002 number plate lamps are compatible with the overriders supplied within this kit.

Mirror finish, polished stainless steel - similar appearance to chrome, but they never rust! Superb value when compared to standard bumpers. Includes Front & Rear bumpers, overriders & fittings. Made on a low-volume press tool and hand finished to ensure any matching joints are aligned as a car set. Expect to make minor adjustments when installing to allow for manufacturing and vehicle variances (loosely assemble and trial fit prior to final tightening). Made from high grade 304 spec stainless steel, with 20% being pure chrome. Internal surfaces are acid etch primed & painted for an original appearance.
Qty Req-1, Model-TR4A, TR5, TR250
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
RF4230
In stock
£840.00 ex VAT£1,008.00 inc UK VAT
Quantity
16
Includes one chrome bolt, nut and lock washer
Qty Req-4, Model-TR4
Rate and Review this Product
725804
In stock
£5.25 ex VAT£6.30 inc UK VAT
Quantity
21
Spanner size 9/16 AF
Hexagon Headed
24tpi
Qty Req-2, Model-TR4
Rate and Review this Product
SH606101
In stock
£0.62 ex VAT£0.74 inc UK VAT
Quantity
47
Save money on buying a kit as items purchased individually costs more than the kit. Fitting kit for bumper.
Qty Req-1, Model-TR4A, TR5, TR250, Item Info 2-includes items 48-63
Rate and Review this Product
808381FK
In stock
£25.25 ex VAT£30.30 inc UK VAT
Quantity
48
Includes one chrome bolt, nut and lock washer
Qty Req-4, Model-TR4A, TR5, TR250
Rate and Review this Product
725804
In stock
£5.25 ex VAT£6.30 inc UK VAT
Quantity
Rate and Review this Product
SH606101
In stock
£0.62 ex VAT£0.74 inc UK VAT
Quantity
Stainless Steel Lamp bar for Triumph TR4, 4A, 250 and 5 allowing the fitting of auxiliary lights. No holes need to be drilled as the bar fits to the bumper irons.

This Lamp Bar , unlike the 'rally' lamp bar does not require the removal of the front bumper. This lamp bar can be fitted straight to the car with the bumper in situ and also allows the bonnet to open normally (assuming 5" lamps are fitted). The lamp bar bolts to the inboard pair of bumper iron bolts, which fall in the same place on all bumpers fitted to TR4, 4A, 250, 5.

Once in place the bar can then be fitted with 5" or 7" fog or auxiliary driving lights. The lamps are positioned 420mm apart and extend forward from the centre line of the lamp bar 82mm. It is worth noting that if very large lamps are to be used that would foul the bonnet when it is opened, the lamps can be hung down off the lamp bar too.

Please note that the overriders fitted to TR4 front bumpers are much closer together than those fitted to the TR4A, TR250 and TR5. With the spacing between the lamps at 420mm as mentioned above, the inboard edge of a TR4 overrider is 65mm from the centre line of the lamp, where the lamp is at its widest. This dimension being 250mm on a TR4A, 250, 5 as the overriders are much further apart.

If 65mm (TR4 only) will not accommodate your chosen lamps, then we suggest purchasing an extender bar RTR8428-1. This stainless steel strip is 4mm thick, 30mm wide, and is intended to be bolted between the two lamp mounts. The strip has nine 5/8" (16mm) diameter holes along its length and can accommodate your lamps at a spacing to suit you including one central lamp if this is legal in the territory where the car will be used.
Qty Req-1
Rate and Review this Product
RF4137
No longer available
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"EXCELLENT service prompt delivery, and no problem returning parts incorrectly ordered," Customer Comment
Product Description

Triumph TR4-250 Front Bumper and Fittings