Product Description
Triumph TR8 V8 Camshaft
We stock a full range of Standard camshafts, which represent good value for money.
We offer a choice of Kent Performance camshafts - available either as complete kits or on their own - which are designed to improve torque and horsepower when fitted to standard or uprated engines. Kent Cams are renowned for their range of performance enhancing cams, and have been manufacturing in the UK since the early '60s. No other single modification will result in a greater increase in performance, than by fitting a performance cam. Rimmer Bros stock a range of Kent hydraulic cams and also offer a selection of cam kits for the Rover V8 engine. Depending on whether you want a straightforward bolt-in cam to improve bottom end power and torque, or are looking for a competition spec set-up which involves modified heads, enhancing the bottom end, fuel and exhaust systems (and perhaps an upgraded distributor), we can help!
Essentially, there are 2 different types of cam for the V8:-
Non GEMS (to 1995), and GEMS type(1995 on, ie 4.0 & 4.6 litre Range Rover 2, 4.0 Discovery 2 & Defender 4.0 EFi). GEMS refers to the electronic engine management system, where there is a sensor pick-up on the rear of the block. GEMS engines are distributor-less and have a crank driven (as opposed to distributor driven) oil pump. This then dictates the type of cam installed.
We offer 4 different types of cam / cam kits, ranging from the Sports Torque to Competition. Our cam kits include the minimum of parts required to install the cam chosen. Our Kent cam installation kit should also be purchased separately (see item 2, RB7488KENT), along with a head gasket set (since valve springs will need to be changed)-see page 25. There are also a few other options to consider depending on your requirements, such as uprated timing chain set, or uprated head studs, main and big end stud & bolt kits. Finally, you may also wish to consider a K+N Filter or even a 4 barrel carb / re-chipped engine management, or performance enhancing extractor manifolds. (Please see relevant sections). If you have any specialised requirements such as high-end competition/racing (solid lifer) cams or cam kits, please enquire.
Kent Sports Torque H180 Designed using the latest in cam design technology, low overlap and minimal duration to help create a package that is unbeatable when installed in a standard production road car or 4x4. Straight swap for standard cam. Improves low-rev and mid range torque with up to 22 BHP increase in power (1000-4500rpm power band), and retains smooth idle characteristics and fuel economy. Also suitable for automatics. No modifications are necessary to ensure straightforward installation. Uprated cam followers and uprated single valve springs are required. A K+N air filter is a worthy and easy upgrade to also enhance performance with this cam.
Valve lift: inlet 11.20mm, exhaust 11.20mm
Timing: inlet 23/59, exhaust 59/23
Cam H180 only :-
Non Gems (to'95) RB7444
Gems type ('95 on) RB7444GEMS
Cam Kit H180: inc H180 cam, cam lube, uprated followers & uprated single type valve springs.
Non Gems (to'95) RB7441
Gems type ('95 on) RB7441GEMS
Kent Fast Road H218 Fast road cams are designed specifically for the spirited driver. Utilising maximum valve acceleration technology, this cam will benefit more with other modifications, such as performance exhaust, K+N air filter and/or fuel system / engine management chip. Improves power by up to 26 BHP (1500-5000rpm power band), with further gains available depending on mods. Boosts top end power whilst retaining low end torque and fuel economy. The benefit with this cam, is that it uses uprated single valve springs, and does not require machining of valve spring platforms. Uprated cam followers and uprated single valve springs are required.
Valve lift: inlet 11.38mm, exhaust 11.78mm
Timing: inlet 27/71, exhaust 74/30
Cam H218 only
Non Gems (to'95) RB7718
Gems type ('95 on) RB7718GEMS
Cam H218 kit Inc H218 cam, cam lube, uprated followers & uprated single type valve springs.
Non Gems (to'95) RB7719
Gems type ('95 on) RB7719GEMS
Kent Fast Road H214 Fast road cams are designed specifically for the spirited driver. Utilising maximum valve acceleration technology, this cam will benefit more with other modifications, such as performance exhaust, K+N air filter and/or fuel system / engine management chip. Improves power by up to 30 BHP (1500-5000rpm power band), with further gains available depending on mods. This kit requires machining of the valve spring platforms to enable fitting of the double springs, and also the top of the valve guides depending upon application. Uprated cam followers and uprated double valve springs and retaining caps are required. Also consider fitting an uprated timing chain kit (RB7449), uprated main and big end studs/bolts (RB7456/RB7500) and uprated head stud kit (RB7680).
Valve lift: inlet 11.90mm, exhaust 12.44mm
Timing: inlet 31/73, exhaust 78/40
Cam H214 only
Non Gems (to'95) RB7445
Gems type ('95 on) RB7445GEMS
Cam H214 kit Inc H214 Cam, cam lube, uprated followers, uprated double type valve springs & special spring retainers.
Non Gems (to'95) RB7442
Gems type ('95 on) RB7442GEMS
Kent Competition H224 Specifically designed for motor sport/competition use, and not generally recommended for road use. This hydraulic cam delivers a power increase dependent upon modifications to heads, fuelling and exhaust (2000-5500rpm power band). This kit requires machining of the valve spring platforms to enable fitting of the double springs, and also the top of the valve guides depending upon application. Uprated cam followers and uprated double valve springs and retaining caps are required. An uprated timing chain kit (RB7449) should also be fitted. Also consider fitting uprated main and big end studs/bolts (RB7456/RB7500) and uprated head stud kit (RB7680).
Valve lift: inlet 12.49mm, exhaust 13.08mm
Timing: inlet 41/83, exhaust 86/44
Cam H224 only
Non Gems (to'95) RB7446
Gems type ('95 on) RB7446GEMS
Cam H224 kit Inc H224 Cam, cam lube, uprated followers, uprated double type valve springs & special spring retainers.
Non Gems (to'95) RB7443
Gems type ('95 on) RB7443GEMS
Installation kit - Kent cam RB7488KENT