Product Description
Adblue Funnel Angled - RX2160 - Laser
Designed to screw directly on to the AdBlue® tank filler neck where the tank is fitted with a vertically accessed filler (Boot floors, under bonnet areas etc.). The funnel valve allows the user to stop the filling process even when there is fluid still in the funnel to help avoid over filling the tank.
Additional Information
For safe transfer of Adblue® from storage containers to the vehicle tank. Equipped with manually operated anti-spill valve.
1100ml transparent funnel with scale.
Equipped with a lid to keep out dirt and debris when not in use.
Air breather pipe to allow air out of the tank, prevent splashing caused by bubbling and help prevent over filling.
For angled AdBlue® filler necks, please see Laser Part No. 6865 Angled AdBlue® Funnel.
AdBlue diesel exhaust fluid is a fact of life for the modern diesel engine, so to make life a bit easier Laser Tools have introduced these AdBlue Filling Funnels specially designed to screw directly onto the AdBlue filler neck. Two versions are available - straight (part number 6856) or angled access (part number 6865) - and they make the AdBlue filling process quick and easy, and best of all - messy spillage can be easily avoided!
Screw the funnel straight on to the AdBlue filler neck then lift the internal anti-spill valve. The funnel is large with a generous 1.1 litre capacity. Keep filling until the AdBlue fluid stops flowing into the vehicle’s reservoir, then simply drop down the internal valve. Now unscrew the funnel and lift it clear. There will no leaks or mess as you transfer the unused fluid back into the original container and leave a full AdBlue reservoir on the vehicle.
The angled AdBlue filler funnel is the same design as the straight version, with the internal anti-spill valve, but with an angled funnel connector. This is the one to use if the AdBlue filler neck is awkward to access or set at an angle.
AdBlue spillage can be costly, messy and once it dries the resulting white crystals can be difficult to remove. But not a problem if you are using one of these AdBlue filling funnels from Laser Tools. Professional solutions for the busy workshop. Available now from your Laser Tools stockist.