Product Description
Waist Rail Finishers - Teak - Pair - RR1540TEAK
Supplied with fixing screws and cup washers please note that these cappings do not feature a grab handle as seen on TR4A- early TR6 models.
These Teak veneer door capping's have an excellent appearance and are a good tight fit to the existing contour. If you are considering upgrading the interior of your TR these are a must have! Being wood veneer they are not prone to breakage, and offer an attractive alternative to the black plastic originals. The rails are 5mm thick and hug the top of the door. As such they do not stick inwards from the door like the originals. No finger pull is provided, so the TR4-4A type door pull handles will be required on all but Late TR6 models. This is part Number 650306 x 2, screws 500166 x 4
(this is a UNF set screw) and fixing nut FS2701 x 4, As these fixings are slightly larger than original you will need to open the holes up slightly. The nut is a fix nut that is clipped to the panel as you are not able to hold the nut, as the door card will be in place when you fit the screw.