Wire Wheel Conversion Kit - Tube Axle with 2 Ear Spinners - 5.5J x 14 inch - Chrome - RP1738C
Converts axles to splined hubs to enable fitment of wire wheels (5 included in kit) or centre lock alloy wheels (not included).
Kit also includes hammer, wheel cleaning brush and (where appropriate) octagonal nut spanner.
Rim Size 5½" x 14"
Centre Four Stud 114.3 mm PCD
Number of Spokes 72
Finish Chrome only
Lacing Inner & Outer
Inset (mm) 22
Back Spacing (mm) 105 (+/- 3)
Click here to view an explanation of inset, outset and back spacing.
This wheel has been tubeless since January 2006
If you have the older, tubed wheels or are fitting tube-type tyres you will need 175/185 x 14 tubes and we recommend 13"/14" rim bands.
Notes P.C.D. is the Pitch Circle Diameter and is the diameter of an imaginary circle drawn through the centres of the holes, click here for instructions on measuring PCDs
All MWS bolt-on wire wheels are supplied with the appropriate nuts, caps and wrench. Replacement centre caps, replacement nuts requiring an external socket wrench and replacement nuts requiring an internal Allen key wrench are available from stock.
For bolt-on wheel nuts the recommended torque is 75 ft lb (102 N m) but may vary depending on the vehicle.