Ball Joint Assembly Lower - RBK500280P1 - OEM
35mm dia. fixing in lower arm.
Original fitment for non-armoured vehicles from VIN 9A502440 onwards only plus all armoured vehicles.
Important note concerning Discovery 3 models up to VIN 9A502439:
The lower ball joints listed here fit into lower arms with 35mm ball joint holes and are the original fitment for vehicles from VIN 9A502440 onwards, plus all armoured vehicles. Non-armoured vehicles prior to this VIN originally had different lower arms taking a different diameter ball joint - this earlier ball joint is not available. To replace a lower ball joint on a non-armoured vehicle prior to VIN 9A502440, first measure the ball joint diameter. One of two actions should then be followed:
If the ball joint present is not 35mm, you will need to replace both the ball joint and lower arm, available together as a lower arm assembly - please refer to the front suspension section for details of the correct lower arm specification for your vehicle.
If the ball joint present is 35mm, the lower arm has already been replaced with the later type and you can order one of the 35mm ball joints listed here.