Edelbrock 500/Edelbrock Dual Plane 4 Barrel Conversion Kit with 3 inch Air Cleaner - RA13234WD
Previously marketed as Weber, the increased capacity Edelbrock 4 barrel 500cfm carb is best suited to larger capacity engines (4.6 litres +) but can be fitted to any Rover V8.
Supplied jetted to suit the standard 3.5 / 3.9 litre engine (primary jet .086, secondary .095, metering rods .065x.052 jet).
A tuning / calibration kit is also available for larger capacity and / or modified engines, which includes assorted jets and metering rods.
The Edelbrock Performer Dual Plane Inlet Manifold offers up to 10 BHP over other 4 barrel manifold options at high mid-range, with increased torque over a wide RPM range, especially from idle to to mid-range.
It also offers excellent throttle response.
Due to its height, it may not offer sufficient under bonnet clearance where space is tight.
Edelbrock 500cfm 4 Barrel Carb with Manual Choke
Edelbrock Dual Plane Inlet Manifold
14" Chrome Pancake Air Cleaner - 3" Deep (K&N Filter available at extra cost)
Fuel Feed Banjo & Bolt
Accelerator Cable & Adaptor
5 Degree Carb Levelling Plate
A Facet Fuel Pump (RB7259) is recommended (sold separately).
For Automatic 4x4, a Kickdown kit (RA1323 4WD KD) is also available for the Edelbrock kit.
4x4 models with Edelbrock dual plane inlet manifold-including 3" air cleaner - Kits include; carb, inlet manifold, 14" chromed air cleaner (K&N at extra cost), thermostat housing, fuel feed banjo and bolt, accelerator and choke cable kits, and 5° carb levelling plate/accelerator cable adaptor. Note: a 1/2" spacer is included with the 2" filters to allow clearance for linkages. See also ‘Optional Parts’ such as fuel pump which may be required in addition to the conversion kit.