Triumph TR6 Transfers

Order your Triumph TR6 Transfers ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID600441

Prices displayed in:
Rate and Review this Product
RB7222
In stock
£4.60 ex VAT£5.52 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
RB7178BLACK
In stock
£4.00 ex VAT£4.80 inc UK VAT
Quantity
Rate and Review this Product
RB7178GOLD
In stock
£3.90 ex VAT£4.68 inc UK VAT
Quantity
Self Adhesive
For Wheel Centre Trim Badge
-
Rate and Review this Product
627502S
In stock
£2.75 ex VAT£3.30 inc UK VAT
Quantity
The Union Jack style rear wing decals were originally factory applied only to 1974 onwards North American TR6s, but can of course be fitted to any model if required!

How to Apply
To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
-
Rate and Review this Product
726830
In stock
£5.75 ex VAT£6.90 inc UK VAT
Quantity
The Union Jack style rear wing decals were originally factory applied only to 1974 onwards North American TR6s, but can of course be fitted to any model if required!

How to Apply
To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
-
Rate and Review this Product
726831
In stock
£5.75 ex VAT£6.90 inc UK VAT
Quantity
Rate and Review this Product
625668
In stock
£6.60 ex VAT£7.92 inc UK VAT
Quantity
Rate and Review this Product
625666
In stock
£6.70 ex VAT£8.04 inc UK VAT
Quantity
For all other colours except yellow or white.
-
Rate and Review this Product
625667
In stock
£6.50 ex VAT£7.80 inc UK VAT
Quantity
Two broad stripes run the length of the vehicle and over the rear of the front wing to bonnet.
The stripe kit includes sufficient material for a complete car.
-
Rate and Review this Product
RR1193
No longer available
Two broad stripes run the length of the vehicle and over the rear of the front wing to bonnet.
The stripe kit includes sufficient material for a complete car.
-
Rate and Review this Product
RR1196
No longer available
Two broad stripes run the length of the vehicle and over the rear of the front wing to bonnet.
The stripe kit includes sufficient material for a complete car.
-
Rate and Review this Product
RR1194
No longer available
Two broad stripes run the length of the vehicle and over the rear of the front wing to bonnet.
The stripe kit includes sufficient material for a complete car.
-
Rate and Review this Product
RR1195
No longer available
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"I am ordering from Norway. Dealing with Rimmer Bros is just as easy as doing so within my country!" Customer Comment
Product Description

Triumph TR6 Transfers