Triumph TR6 Decals, Stripes and Badges

Order your Triumph TR6 Decals, Stripes and Badges ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID600320

Prices displayed in:
Rate and Review this Product
625666
In stock
Most express orders ship today!
£6.70 ex VAT£8.04 inc UK VAT
Quantity
86
For all other colours except yellow or white.
Qty Req-2
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
625667
In stock
Most express orders ship today!
£6.50 ex VAT£7.80 inc UK VAT
Quantity
Rate and Review this Product
625668
In stock
Most express orders ship today!
£6.60 ex VAT£7.92 inc UK VAT
Quantity
87
The Union Jack style rear wing decals were originally factory applied only to 1974 onwards North American TR6s, but can of course be fitted to any model if required!

How to Apply
To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1, Model-North American Models from Comm No CF1 1973 to 1976
Rate and Review this Product
726830
In stock
Most express orders ship today!
£5.75 ex VAT£6.90 inc UK VAT
Quantity
87
The Union Jack style rear wing decals were originally factory applied only to 1974 onwards North American TR6s, but can of course be fitted to any model if required!

How to Apply
To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1, Model-North American Models from Comm No CF1 1973 to 1976
Rate and Review this Product
726831
In stock
Most express orders ship today!
£5.75 ex VAT£6.90 inc UK VAT
Quantity
88
A 3mm pin stripe runs the length of the vehicle along the body line.
The stripe kit includes sufficient material for a complete car.
Qty Req-1, Model-European Models
Rate and Review this Product
RR1189
In stock
Most express orders ship today!
£19.00 ex VAT£22.80 inc UK VAT
Quantity
88
A 3mm pin stripe runs the length of the vehicle along the body line.
The stripe kit includes sufficient material for a complete car.
Qty Req-1, Model-European Models
Rate and Review this Product
RR1192
In stock
Most express orders ship today!
£19.00 ex VAT£22.80 inc UK VAT
Quantity
88
A 3mm pin stripe runs the length of the vehicle along the body line.
The stripe kit includes sufficient material for a complete car.
Qty Req-1, Model-European Models
Rate and Review this Product
RR1190
In stock
Most express orders ship today!
£19.00 ex VAT£22.80 inc UK VAT
Quantity
88
A 3mm pin stripe runs the length of the vehicle along the body line.
The stripe kit includes sufficient material for a complete car.
Qty Req-1, Model-European Models
Rate and Review this Product
RR1191
In stock
Most express orders ship today!
£19.00 ex VAT£22.80 inc UK VAT
Quantity
88
A 3mm pin stripe runs the length of the vehicle along the body line.
The stripe kit includes sufficient material for a complete car.
Qty Req-1, Model-European Models
Rate and Review this Product
RR1301
In stock
Most express orders ship today!
£19.00 ex VAT£22.80 inc UK VAT
Quantity
89
Two broad stripes run the length of the vehicle and over the rear of the front wing to bonnet.
The stripe kit includes sufficient material for a complete car.
Qty Req-1, Model-North American Models
Rate and Review this Product
RR1193
No longer available
89
Two broad stripes run the length of the vehicle and over the rear of the front wing to bonnet.
The stripe kit includes sufficient material for a complete car.
Qty Req-1, Model-North American Models
Rate and Review this Product
RR1196
No longer available
89
Two broad stripes run the length of the vehicle and over the rear of the front wing to bonnet.
The stripe kit includes sufficient material for a complete car.
Qty Req-1, Model-North American Models
Rate and Review this Product
RR1194
No longer available
89
Two broad stripes run the length of the vehicle and over the rear of the front wing to bonnet.
The stripe kit includes sufficient material for a complete car.
Qty Req-1, Model-North American Models
Rate and Review this Product
RR1195
No longer available
93
Plastic fix for 1/8" diameter badge pin in 11/64" panel hole. Badges/letter fasteners. For all letters & badges except 620396.
Qty Req-3
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GHF1532
In stock
Most express orders ship today!
£0.48 ex VAT£0.58 inc UK VAT
Quantity
94
Plastic fix for 1/8" diameter badge pin in 11/64" panel hole. Badges/letter fasteners. For all letters & badges except 620396.
Qty Req-2
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GHF1532
In stock
Most express orders ship today!
£0.48 ex VAT£0.58 inc UK VAT
Quantity
5 out of 5 starsRead 2 Review(s)Rate and Review this Product
626859STICKER
In stock
Most express orders ship today!
£10.20 ex VAT£12.24 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
627502S
In stock
Most express orders ship today!
£2.75 ex VAT£3.30 inc UK VAT
Quantity
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Nice to see someone who cares for spare parts to MG's" Customer Comment
Product Description

Triumph TR6 Decals, Stripes and Badges

Review: Ron M Submitted: 20/04/2021

Overall5 out of 5 stars.
verified

Subject
Looks original

Did this item work well with your project? What vehicle type are you using this for?
Part arrived quickly and appears to be an exact duplicate of the original part. Quality appears very good.

Review: Jiri Mudra Submitted: 27/11/2020

Overall5 out of 5 stars.
verified

Subject
Part Worked Perfectl

Did this item work well with your project? What vehicle type are you using this for?
Exactly what I expected