Triumph TR6 Rocker Cover

Order your Triumph TR6 Rocker Cover ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID600010

Prices displayed in:
45
Please note: These rocker covers may have some minor imperfections such as dents on the fins or markings in the paint, this is as a result of the manufacturing process.

Includes cap & dome headed nuts

We recommend fitting with GEG413T gasket

NOTE: GT6 ONLY - Due to minimal clearance between bonnet & rocker cover, must use thin rocker cover gasket GEG413T.
Engine & gearbox mountings should be in good condition (to minimise engine lift on acceleration).
Also engine mountings should be fitted to rear of turret plates.
Qty Req-1, Model-All CP Models
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
TKC378A
Out of stock, expected soon. Add to cart and Back Order
£82.00 ex VAT£98.40 inc UK VAT
Quantity
45
Please note: These rocker covers may have some minor imperfections such as dents on the fins or markings in the paint, this is as a result of the manufacturing process.

Includes cap & dome headed nuts

We recommend fitting with GEG413T gasket

NOTE: GT6 ONLY - Due to minimal clearance between bonnet & rocker cover, use thin rocker cover gasket GEG413T.
Engine & gearbox mountings should be in good condition (to minimise engine lift on acceleration).
Also engine mountings should be fitted to rear of turret plates.
Qty Req-1, Model-All CP Models
Rate and Review this Product
TKC378AP
Out of stock, expected soon. Add to cart and Back Order
£85.00 ex VAT£102.00 inc UK VAT
Quantity
45
Please note: These rocker covers may have some minor imperfections such as dents on the fins or markings in the paint, this is as a result of the manufacturing process.

Includes cap & dome headed nuts

We recommend fitting with GEG413T gasket

NOTE: GT6 ONLY - Due to minimal clearance between bonnet & rocker cover, must use thin rocker cover gasket GEG413T.
Engine & gearbox mountings should be in good condition (to minimise engine lift on acceleration).
Also engine mountings should be fitted to rear of turret plates.
Qty Req-1, Model-All CR Models
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
TKC378A
Out of stock, expected soon. Add to cart and Back Order
£82.00 ex VAT£98.40 inc UK VAT
Quantity
45
Please note: These rocker covers may have some minor imperfections such as dents on the fins or markings in the paint, this is as a result of the manufacturing process.

Includes cap & dome headed nuts

We recommend fitting with GEG413T gasket

NOTE: GT6 ONLY - Due to minimal clearance between bonnet & rocker cover, use thin rocker cover gasket GEG413T.
Engine & gearbox mountings should be in good condition (to minimise engine lift on acceleration).
Also engine mountings should be fitted to rear of turret plates.
Qty Req-1, Model-All CR Models
Rate and Review this Product
TKC378AP
Out of stock, expected soon. Add to cart and Back Order
£85.00 ex VAT£102.00 inc UK VAT
Quantity
46
This oil cap is only suitable for the original steel rocker cover.
Qty Req-1
Rate and Review this Product
598231
This part has been superseded
Use 598231P
46
The Oil Filler Cap (pressed steel-bayonet type) - 598231P is a crucial component in the maintenance and operation of various automotive systems. This cap is specially designed to ensure the safe and efficient sealing of oil reservoirs and containers, preventing contaminants from entering while allowing for easy access during maintenance.

Fits many Triumph models, Land Rover Defender and MG Midget.
  • Oil Filler Cap
  • Oil Filler Cap (pressed steel-bayonet type)
Qty Req-1
Rate and Review this Product
598231P
In stock
£3.65 ex VAT£4.38 inc UK VAT
Quantity
48
Please note: These rocker covers may have some minor imperfections such as dents on the fins or markings in the paint, this is as a result of the manufacturing process.

Includes cap & dome headed nuts

We recommend fitting with GEG413T gasket

NOTE: GT6 ONLY - Due to minimal clearance between bonnet & rocker cover, must use thin rocker cover gasket GEG413T.
Engine & gearbox mountings should be in good condition (to minimise engine lift on acceleration).
Also engine mountings should be fitted to rear of turret plates.
Qty Req-1, Model-All CP Models
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
TKC378A
Out of stock, expected soon. Add to cart and Back Order
£82.00 ex VAT£98.40 inc UK VAT
Quantity
48
Please note: These rocker covers may have some minor imperfections such as dents on the fins or markings in the paint, this is as a result of the manufacturing process.

Includes cap & dome headed nuts

We recommend fitting with GEG413T gasket

NOTE: GT6 ONLY - Due to minimal clearance between bonnet & rocker cover, use thin rocker cover gasket GEG413T.
Engine & gearbox mountings should be in good condition (to minimise engine lift on acceleration).
Also engine mountings should be fitted to rear of turret plates.
Qty Req-1, Model-All CP Models
Rate and Review this Product
TKC378AP
Out of stock, expected soon. Add to cart and Back Order
£85.00 ex VAT£102.00 inc UK VAT
Quantity
50
Helps seal the joint between the rocker cover and the rest of the engine.
Qty Req-1
Rate and Review this Product
GEG413
In stock
£5.80 ex VAT£6.96 inc UK VAT
Quantity
50
Premium gasket, produced using high temperature silicone and designed to be re-usable.

This gasket fits the popular aftermarket Aluminium Alloy valve cover available for the Triumph inline 6 cylinder engines (1998cc, 2498cc). This includes the TR6, TR5/250, GT6, Vitesse, P.I. Saloon & Sedan, and other Triumph models fitted with this engine. Also fits TVR models using the Triumph 6 cylinder engine.

This gasket has been patterned directly from an Alloy valve cover. The radius of the corners of this gasket will match the alloy cover perfectly, unlike a stock gasket. The cross-section of this gasket is rectangular to suit the sealing surface of the alloy valve cover.
Qty Req-1
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GEG413URT
In stock
£29.00 ex VAT£34.80 inc UK VAT
Quantity
50
Premium gasket, produced using high temperature silicone and designed to be re-usable.

This gasket fits the original pressed steel rocker cover used on all the Triumph inline 6 cylinder engines (1998cc 2498cc). This includes the TR6, TR5/250, GT6, Vitesse, P.I. Saloon & Sedan, and other Triumph models fitted with this engine. Also fits TVR models using the Triumph 6 cylinder engine.

This gasket has been designed with a semi-circular cross section to better fit these valve covers. The flat side of the gasket mates to the cylinder head while the curved semi-circular side mates to the recess in the valve cover to eliminate leaks.
Qty Req-1
Rate and Review this Product
GEG413UR
In stock
£27.00 ex VAT£32.40 inc UK VAT
Quantity
50
Use with alloy rocker cover for increased bonnet clearance
Qty Req-1
Rate and Review this Product
GEG413T
In stock
£10.50 ex VAT£12.60 inc UK VAT
Quantity
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Another quick and easy purchase from Rimmer Bros. Outstanding choice of parts for my 1976 Spitfire, one stop shopping." Customer Comment
Product Description

Triumph TR6 Rocker Cover
All rocker covers listed are completely interchangeable - standard fasteners and gasket are used to attach both steel and alloy rocker covers.  The alloy rocker cover is a precision, high pressure die cast item and includes a unique bright chrome filler cap.

Note:  For manifolds, fixing details and fittings, please see ‘Manifold’ section.