Triumph TR4A Rear Seat Covers

Order your Triumph TR4A Rear Seat Covers ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID200848

Prices displayed in:
34
Identification: cushion only, with vertical pleats. See Interior Trim Panels for hood frame covers, which served as the squab and side panels for the occasional rear seat on TR4 non-Surrey top models.

Notes on Ordering Seat Colours
LATE TR4 & TR4A: In some respects seating in TR4s and TR4As was a simpler business than in the earlier sidescreen cars; in other respects - namely the style of the seat itself and the changepoints between the usage of styles - it was rather more complex. There were three types of seat; the first two, used on earlier TR4s, were visually similar to (but not quite the same as) the bucket seat of the sidescreen cars and were only differentiated by the cover pleating patterns. These seats may be found in the previous section of this catalogue. Late model TR4s and all TR4As used a much more modern affair with tubular framed construction, TR4As differing from TR4s, again, in the pleating pattern used. Going back to TR4 seats, it seems that the changeover between the types of seat fitted was governed by what colours of obsolete seat assembly Standard Triumph had remaining in stock when the next seat design arrived, and the desire to use that stock rather than waste it. As a result, the break points between styles and colours were not exactly hard and fast. The chassis numbers quoted in this section should therefore only be taken as an approximate guide.
As for colours, well, the situation is the same as that told on the TR4-TR4A Interior Trim Panels & Kits pages: colours currently available are Black, Midnight Blue, Cherokee Red and Matador Red. Leather was always considered a special order option from the factory in place of the usual synthetic materials (vynide on the first two styles of TR4 seat and ambla on the late TR4 & TR4A seats). Requests for seat covers in different colours to the usual four options can be entertained as special orders, but rely on reasonable availability of materials in those colours in the industry.
-
Rate and Review this Product
RF4186BLACK
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£485.00 ex VAT£582.00 inc UK VAT
Quantity
Rate and Review this Product
RF4187BLACK
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£660.00 ex VAT£792.00 inc UK VAT
Quantity
Rate and Review this Product
RF4187BLACK2
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£660.00 ex VAT£792.00 inc UK VAT
Quantity
34
Identification: cushion only, with vertical pleats. See Interior Trim Panels for hood frame covers, which served as the squab and side panels for the occasional rear seat on TR4 non-Surrey top models.

Notes on Ordering Seat Colours
LATE TR4 & TR4A: In some respects seating in TR4s and TR4As was a simpler business than in the earlier sidescreen cars; in other respects - namely the style of the seat itself and the changepoints between the usage of styles - it was rather more complex. There were three types of seat; the first two, used on earlier TR4s, were visually similar to (but not quite the same as) the bucket seat of the sidescreen cars and were only differentiated by the cover pleating patterns. These seats may be found in the previous section of this catalogue. Late model TR4s and all TR4As used a much more modern affair with tubular framed construction, TR4As differing from TR4s, again, in the pleating pattern used. Going back to TR4 seats, it seems that the changeover between the types of seat fitted was governed by what colours of obsolete seat assembly Standard Triumph had remaining in stock when the next seat design arrived, and the desire to use that stock rather than waste it. As a result, the break points between styles and colours were not exactly hard and fast. The chassis numbers quoted in this section should therefore only be taken as an approximate guide.
As for colours, well, the situation is the same as that told on the TR4-TR4A Interior Trim Panels & Kits pages: colours currently available are Black, Midnight Blue, Cherokee Red and Matador Red. Leather was always considered a special order option from the factory in place of the usual synthetic materials (vynide on the first two styles of TR4 seat and ambla on the late TR4 & TR4A seats). Requests for seat covers in different colours to the usual four options can be entertained as special orders, but rely on reasonable availability of materials in those colours in the industry.
-
Rate and Review this Product
RF4186REDMAT
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£485.00 ex VAT£582.00 inc UK VAT
Quantity
Rate and Review this Product
RF4187REDMAT
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£660.00 ex VAT£792.00 inc UK VAT
Quantity
34
Identification: cushion only, with vertical pleats. See Interior Trim Panels for hood frame covers, which served as the squab and side panels for the occasional rear seat on TR4 non-Surrey top models.

Notes on Ordering Seat Colours
LATE TR4 & TR4A: In some respects seating in TR4s and TR4As was a simpler business than in the earlier sidescreen cars; in other respects - namely the style of the seat itself and the changepoints between the usage of styles - it was rather more complex. There were three types of seat; the first two, used on earlier TR4s, were visually similar to (but not quite the same as) the bucket seat of the sidescreen cars and were only differentiated by the cover pleating patterns. These seats may be found in the previous section of this catalogue. Late model TR4s and all TR4As used a much more modern affair with tubular framed construction, TR4As differing from TR4s, again, in the pleating pattern used. Going back to TR4 seats, it seems that the changeover between the types of seat fitted was governed by what colours of obsolete seat assembly Standard Triumph had remaining in stock when the next seat design arrived, and the desire to use that stock rather than waste it. As a result, the break points between styles and colours were not exactly hard and fast. The chassis numbers quoted in this section should therefore only be taken as an approximate guide.
As for colours, well, the situation is the same as that told on the TR4-TR4A Interior Trim Panels & Kits pages: colours currently available are Black, Midnight Blue, Cherokee Red and Matador Red. Leather was always considered a special order option from the factory in place of the usual synthetic materials (vynide on the first two styles of TR4 seat and ambla on the late TR4 & TR4A seats). Requests for seat covers in different colours to the usual four options can be entertained as special orders, but rely on reasonable availability of materials in those colours in the industry.
-
Rate and Review this Product
RF4186REDCHERO
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£485.00 ex VAT£582.00 inc UK VAT
Quantity
Rate and Review this Product
RF4187REDCHERO
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£660.00 ex VAT£792.00 inc UK VAT
Quantity
34
Identification: cushion only, with vertical pleats. See Interior Trim Panels for hood frame covers, which served as the squab and side panels for the occasional rear seat on TR4 non-Surrey top models.

Notes on Ordering Seat Colours
LATE TR4 & TR4A: In some respects seating in TR4s and TR4As was a simpler business than in the earlier sidescreen cars; in other respects - namely the style of the seat itself and the changepoints between the usage of styles - it was rather more complex. There were three types of seat; the first two, used on earlier TR4s, were visually similar to (but not quite the same as) the bucket seat of the sidescreen cars and were only differentiated by the cover pleating patterns. These seats may be found in the previous section of this catalogue. Late model TR4s and all TR4As used a much more modern affair with tubular framed construction, TR4As differing from TR4s, again, in the pleating pattern used. Going back to TR4 seats, it seems that the changeover between the types of seat fitted was governed by what colours of obsolete seat assembly Standard Triumph had remaining in stock when the next seat design arrived, and the desire to use that stock rather than waste it. As a result, the break points between styles and colours were not exactly hard and fast. The chassis numbers quoted in this section should therefore only be taken as an approximate guide.
As for colours, well, the situation is the same as that told on the TR4-TR4A Interior Trim Panels & Kits pages: colours currently available are Black, Midnight Blue, Cherokee Red and Matador Red. Leather was always considered a special order option from the factory in place of the usual synthetic materials (vynide on the first two styles of TR4 seat and ambla on the late TR4 & TR4A seats). Requests for seat covers in different colours to the usual four options can be entertained as special orders, but rely on reasonable availability of materials in those colours in the industry.
-
Rate and Review this Product
RF4186BLUE
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£485.00 ex VAT£582.00 inc UK VAT
Quantity
Rate and Review this Product
RF4187BLUE
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£660.00 ex VAT£792.00 inc UK VAT
Quantity
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Great selection and stock of parts, with fast shipping and good customer service." Customer Comment
Product Description

Triumph TR4A Rear Seat Covers
Identification: cushion only, with vertical pleats; thinner cushion than on TR4.

Notes on Ordering Seat Colours
LATE TR4 & TR4A: In some respects seating in TR4s and TR4As was a simpler business than in the earlier sidescreen cars; in other respects - namely the style of the seat itself and the changepoints between the usage of styles - it was rather more complex.  There were three types of seat;  the first two, used on earlier TR4s, were visually similar to (but not quite the same as) the bucket seat of the sidescreen cars and were only differentiated by the cover pleating patterns.  These seats may be found in the previous section of this catalogue.  Late model TR4s and all TR4As used a much more modern affair with tubular framed construction, TR4As differing from TR4s, again, in the pleating pattern used. Going back to TR4 seats, it seems that the changeover between the types of seat fitted was governed by what colours of obsolete seat assembly Standard Triumph had remaining in stock when the next seat design arrived, and the desire to use that stock rather than waste it.  As a result, the break points between styles and colours were not exactly hard and fast. The chassis numbers quoted in this section should therefore only be taken as an approximate guide.
As for colours, well, the situation is the same as that told on the TR4-TR4A Interior Trim Panels & Kits pages: colours currently available are black, midnight blue, cherokee red and matador red. Leather was always considered a special order option from the factory in place of the usual synthetic materials (vynide on the first two styles of TR4 seat and ambla on the late TR4 & TR4A seats). Requests for seat covers in different colours to the usual four options can be entertained as special orders, but rely on reasonable availability of materials in those colours in the industry.