Triumph TR2-4A Telescopic Rear Shock Absorber Conversions - Solid Axle

Order your Triumph TR2-4A Telescopic Rear Shock Absorber Conversions - Solid Axle ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID200372

Prices displayed in:
70
Allows replacement of lever arm shock absorbers with telescopic dampers.
Not suitable for North American Spec TR4A vehicles (where damper is fitted at 90 degrees to the spring).
Model-TR2,TR3,TR3A & TR4 to CT23382
Rate and Review this Product
RW3077
Out of stock, expected soon Dec 01, 2024. Add to cart and Back Order
£247.50 ex VAT£297.00 inc UK VAT
Quantity
71
Open length 322.0mm Closed length 245.0mm

Triumph GT6 MK 3, Triumph Spitfire, Triumph Herald and Triumph Vitesse

The KSX damper range is specifically designed for Classic Car owners who need a Bespoke solution to their suspension needs.

The basic principle of the KSX range is to allow you to create your own specification of damper from a standardised range of damper bodies and end fixings.

KSX dampers have 28 stages of on car stiffness adjustment. The adjustment is made with no dismantling and it alters both the bump and rebound forces in unison. The damping characteristics have been specially designed to be ideal for touring and for fast road use. SPAX KSX dampers are pressurized with Krypton gas. This produces not only superior low speed ride quality, but also high speed performance that is significantly improved.

KSX dampers are designed and hand built to the strictest German TüV quality standards, using the latest technologies and methods. Each and every damper is fully Dyno Tested to ensure you get 100% performance, 100% quality, 100% guaranteed. All KSX dampers are Epoxy Powder coated and oven cured for second to none looks and extra long life.

The KSX range has been designed so it can be serviced, re-valved and repaired if required. This allows a long and economic damper life.

SPAX’s massive buying power, commitment to value and “Factory Direct” pricing allows you to buy this premium product at second to none value.
Model-TR2,TR3,TR3A & TR4 to CT23382
Rate and Review this Product
GDA4011SPAX
In stock
Most express orders ship today!
£180.00 ex VAT£216.00 inc UK VAT
Quantity
71
Open length 282.7mm Closed length 208.7mm

Triumph GT6 MK 3, Spitfire, Herald and Vitesse - lowered suspension.

The KSX damper range is specifically designed for Classic Car owners who need a Bespoke solution to their suspension needs. The basic principle of the KSX range is to allow you to create your own specification of damper from a standardised range of damper bodies and end fixings.

KSX dampers have 28 stages of on car stiffness adjustment. The adjustment is made with no dismantling and it alters both the bump and rebound forces in unison. The damping characteristics have been specially designed to be ideal for touring and for fast road use. SPAX KSX dampers are pressurized with Krypton gas.

This produces not only superior low speed ride quality, but also high speed performance that is significantly improved. KSX dampers are designed and hand built to the strictest German TüV quality standards, using the latest technologies and methods. Each and every damper is fully Dyno Tested to ensure you get 100% performance, 100% quality, 100% guaranteed. All KSX dampers are Epoxy Powder coated and oven cured for second to none looks and extra long life.

The KSX range has been designed so it can be serviced, re-valved and repaired if required. This allows a long and economic damper life. SPAX’s massive buying power, commitment to value and “Factory Direct” pricing allows you to buy this premium product at second to none value.
Model-TR2,TR3,TR3A & TR4 to CT23382
Rate and Review this Product
GDA4011SPAXLOW
In stock
Most express orders ship today!
£195.00 ex VAT£234.00 inc UK VAT
Quantity
Triumph Spitfire, Herald, GT6 (Non Rotoflex) and Vitesse (Non Rotoflex)

Note:

Non Rotoflex - Spitfire, Herald, Vitesse & GT6 - Remove metal sleeve from bottom bush.

Rotoflex - Herald, Vitesse & GT6 - Keep metal sleeve in bottom bush.


GAZ GT Series: A very extensive range of telescopic dampers for both modern and classic car applications. These units can be built in various open and closed lengths and will adjust bump and rebound off a single control knob.
Model-TR2,TR3,TR3A & TR4 to CT23382
Rate and Review this Product
GDA4011GAZ
In stock
Most express orders ship today!
£135.00 ex VAT£162.00 inc UK VAT
Quantity
70
Allows replacement of lever arm shock absorbers with telescopic dampers.
Not suitable for North American Spec TR4A vehicles (where damper is fitted at 90 degrees to the spring).
Model-TR4 from CT23383
Rate and Review this Product
RW3077
Out of stock, expected soon Dec 01, 2024. Add to cart and Back Order
£247.50 ex VAT£297.00 inc UK VAT
Quantity
71
Use With RW3077

The KSX damper range is specifically designed for Classic Car owners who need a Bespoke solution to their suspension needs.

The basic principle of the KSX range is to allow you to create your own specification of damper from a standardised range of damper bodies and end fixings.

KSX dampers have 28 stages of on car stiffness adjustment. The adjustment is made with no dismantling and it alters both the bump and rebound forces in unison. The damping characteristics have been specially designed to be ideal for touring and for fast road use. SPAX KSX dampers are pressurized with Krypton gas. This produces not only superior low speed ride quality, but also high speed performance that is significantly improved.

KSX dampers are designed and hand built to the strictest German TüV quality standards, using the latest technologies and methods. Each and every damper is fully Dyno Tested to ensure you get 100% performance, 100% quality, 100% guaranteed. All KSX dampers are Epoxy Powder coated and oven cured for second to none looks and extra long life.

The KSX range has been designed so it can be serviced, re-valved and repaired if required. This allows a long and economic damper life.

SPAX's massive buying power, commitment to value and "Factory Direct" pricing allows you to buy this premium product at second to none value.
Model-TR4 from CT23383
Rate and Review this Product
RW3079SPAX
In stock
Most express orders ship today!
£205.00 ex VAT£246.00 inc UK VAT
Quantity
70
Allows replacement of lever arm shock absorbers with telescopic dampers.
Not suitable for North American Spec TR4A vehicles (where damper is fitted at 90 degrees to the spring).
Model-TR4A Rigid Axle
Rate and Review this Product
RW3077
Out of stock, expected soon Dec 01, 2024. Add to cart and Back Order
£247.50 ex VAT£297.00 inc UK VAT
Quantity
71
Use With RW3077

The KSX damper range is specifically designed for Classic Car owners who need a Bespoke solution to their suspension needs.

The basic principle of the KSX range is to allow you to create your own specification of damper from a standardised range of damper bodies and end fixings.

KSX dampers have 28 stages of on car stiffness adjustment. The adjustment is made with no dismantling and it alters both the bump and rebound forces in unison. The damping characteristics have been specially designed to be ideal for touring and for fast road use. SPAX KSX dampers are pressurized with Krypton gas. This produces not only superior low speed ride quality, but also high speed performance that is significantly improved.

KSX dampers are designed and hand built to the strictest German TüV quality standards, using the latest technologies and methods. Each and every damper is fully Dyno Tested to ensure you get 100% performance, 100% quality, 100% guaranteed. All KSX dampers are Epoxy Powder coated and oven cured for second to none looks and extra long life.

The KSX range has been designed so it can be serviced, re-valved and repaired if required. This allows a long and economic damper life.

SPAX's massive buying power, commitment to value and "Factory Direct" pricing allows you to buy this premium product at second to none value.
Model-TR4A Rigid Axle
Rate and Review this Product
RW3079SPAX
In stock
Most express orders ship today!
£205.00 ex VAT£246.00 inc UK VAT
Quantity
Rate and Review this Product
RW3079KONI
Usually in stock at our supplier, allow 2 weeks for delivery
£210.00 ex VAT£252.00 inc UK VAT
Quantity
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Good choice and excellent delivery." Customer Comment
Product Description

Triumph TR2-4A Telescopic Rear Shock Absorber Conversions - Solid Axle