MGB Wheel Tools

Order your MGB Wheel Tools ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID019742

Prices displayed in:
26
This tool is the first tool used when removing wheels from a vehicle. Removes the hub or center wheel cover cap to expose the lug nuts.
  • Simplifies the removal of hub and wheel caps
  • Speeds wheel service and reduces damage to the wheel
  • Unique Slide Hammer design eliminates prying against the wheel finish and potential scratches
  • Simply place the hook onto the back side of the cap and slide the handle to hammer the cap off the wheel
  • Opposite end has a rubber bumper used to re-install cap with a simple tap
Qty Req-1, Item Info 2-perforated steel wheels
Rate and Review this Product
11H1051
In stock
£5.60 ex VAT£6.72 inc UK VAT
Quantity
27
Side lift jack, for the Austin-Healey & MG range.
  • MGB
  • Midget Mk1
  • Midget Mk2
  • Sprite Mk1
  • Sprite Mk2
  • Sprite Mk3
  • Covering years 1958 to 1970
Qty Req-1
Rate and Review this Product
BHA5329
In stock
£155.00 ex VAT£186.00 inc UK VAT
Quantity
30
Octagonal Hub Spanner 70mm for Wire Wheels.

Upgrade your wheel maintenance toolkit with our precision-crafted 70mm Octagonal Hub Spanner. Designed specifically for wire wheels, this spanner ensures a snug fit and efficient handling.

Whether you own an MG MGB, Austin Healey, MG Midget, Sprite & Midget, or a Triumph TR2, TR3, TR4, TR5, or TR6.

This versatile tool is a must-have for wheel spinner adjustments.
Qty Req-1, Item Info 2-centre lock wire wheels & centre lock alloy wheels
4.5 out of 5 starsRead 2 Review(s)Rate and Review this Product
KAS42
In stock
£10.90 ex VAT£13.08 inc UK VAT
Quantity
30
Easy to Fit, Easier to Use: Say goodbye to complicated tools and frustrating wheel changes. Our Octagonal Steel Spinner Remover is designed for simplicity. No other tools required - just grab it and get to work!

Precision Engineering for Triumph & MGs: Crafted specifically for wire wheel Triumph & MGs with octagonal spinners, this remover ensures a snug fit and hassle-free operation. Whether you’re a seasoned mechanic or a DIY enthusiast, you’ll appreciate its straightforward design.

Long Handle, Big Benefits: The secret lies in the long handle. It provides the leverage you need for effortless spinner removal and replacement. No more guesswork - tighten those spinners just right without breaking a sweat.

Guard Against Over-Tightening: Accidental over or under tightening? Not on our watch! The Octagonal Steel Spinner Remover prevents damage by maintaining the perfect balance. Say goodbye to flaking chrome and bruised spinners - your Triumph & MG deserves better.

Features:
  • Material: Sturdy steel construction
  • Compatibility: Fits all wire wheel MGs with octagonal spinners
  • Dimensions: Long handle for optimal leverage
  • Purpose: Spinner removal, replacement, and peace of mind
Qty Req-1, Item Info 2-centre lock wire wheels & centre lock alloy wheels
Rate and Review this Product
RX1499
In stock
£60.50 ex VAT£72.60 inc UK VAT
Quantity
NI
The Wooden Spinner Saver for 2-Eared Spinners is a smart accessory designed specifically for MG and Triumph owners with 2-eared spinners. These iconic spinners, while elegant, are prone to damage from hammer blows during maintenance. The Wooden Spinner Saver steps in as the unsung hero, absorbing the impact and protecting your spinners from flaking chrome and bruises. Its simple design features long handles that enhance leverage, making spinner adjustments a breeze. Plus, it’s cost-effective – priced at two-thirds of a single spinner, it quickly pays for itself by safeguarding your precious spinners.
Qty Req-1, Item Info 2-centre lock wire wheels & centre lock alloy wheels
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
AHH5839W
In stock
£21.00 ex VAT£25.20 inc UK VAT
Quantity
NI
Never again risk damaging your wing or accidentally hitting a spoke with a hammer.

Our precision-engineered wrench is designed to make wheel nut removal a breeze.

Here’s why it’s the perfect addition to your toolkit.
This wrench is compatible with ALL Triumph & MG models. However, please note that it will NOT fit American knockoff nuts on the MG models. While it’s a perfect match for original wheels, some modern aftermarket spinners have larger ears and domed centers. Keep this in mind when choosing your wheel accessories.

Our wrench generates ample torque, allowing you to confidently tighten or loosen your wheel nuts. Feel the tension and maintain control without resorting to copper or lead hammers. Unlike traditional hammers, our wrench treats your Knock-Offs with care.

Say goodbye to dings and scratches - this tool is your wheel’s best friend.
The wrench conveniently stores in your boot, ready for roadside emergencies. Plus, it won’t break the bank - affordability meets functionality.

Important Note, while this wrench is robust, avoid excessive force. It’s not designed for stubborn Knock-Offs, and definitely don’t stand or jump on it.
Qty Req-1, Item Info 2-centre lock wire wheels & centre lock alloy wheels
Rate and Review this Product
RX1498
In stock
£67.00 ex VAT£80.40 inc UK VAT
Quantity
NI
Designed specifically to clean wire wheels with bristles all the way around and a long thin shape which makes it easy to clean in between the spokes.
Qty Req-1
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
KACB101
In stock
£7.65 ex VAT£9.18 inc UK VAT
Quantity
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Great choice of products, always find what I need." Customer Comment
Product Description

MGB Wheel Tools

Review: Guy Vinall Submitted: 18/11/2020

Overall5 out of 5 stars.
verified

Subject
Expensive, but well made and will last. Good addition to the workshop.

Did this item work well with your project? What vehicle type are you using this for?
TR6. Too big & heavy to leave in the boot. Will use in the workshop when changing wheels. I'm sure it will outlast me!