MGB Wheel Nuts & Centre Caps

Order your MGB Wheel Nuts & Centre Caps ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID019738

Prices displayed in:
Rate and Review this Product
BTB354
In stock
Most orders placed now ship next business day!
£3.96 ex VAT£4.75 inc UK VAT
Quantity
Rate and Review this Product
AHH9152
In stock
Most orders placed now ship next business day!
£1.88 ex VAT£2.26 inc UK VAT
Quantity
Rate and Review this Product
AHH9152SS
In stock
Most orders placed now ship next business day!
£6.46 ex VAT£7.75 inc UK VAT
Quantity
Rate and Review this Product
AHH9152MG
In stock
Most orders placed now ship next business day!
£3.54 ex VAT£4.25 inc UK VAT
Quantity
Rate and Review this Product
AHH9152SMG
In stock
Most orders placed now ship next business day!
£3.33 ex VAT£4.00 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
BHH1087
In stock
Most orders placed now ship next business day!
£3.96 ex VAT£4.75 inc UK VAT
Quantity
Rate and Review this Product
BHH2269
In stock
Most orders placed now ship next business day!
£5.42 ex VAT£6.50 inc UK VAT
Quantity
Rate and Review this Product
BHH2269CHR
In stock
Most orders placed now ship next business day!
£7.29 ex VAT£8.75 inc UK VAT
Quantity
Rate and Review this Product
AHH9152LOCKROS
Usually in stock at our supplier, allow 1 week for delivery
£24.79 ex VAT£29.75 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
AHH9268
In stock
Most orders placed now ship next business day!
£7.75 ex VAT£9.30 inc UK VAT
Quantity
Rate and Review this Product
BHH1060
In stock
Most orders placed now ship next business day!
£20.50 ex VAT£24.60 inc UK VAT
Quantity
Rate and Review this Product
AHH9268G
1 in stock
Most orders placed now ship next business day!
£1.50 ex VAT£1.80 inc UK VAT
Quantity
Rate and Review this Product
CHA747
In stock
Most orders placed now ship next business day!
£5.00 ex VAT£6.00 inc UK VAT
Quantity
Rate and Review this Product
BHH1994
In stock
Most orders placed now ship next business day!
£4.50 ex VAT£5.40 inc UK VAT
Quantity
Rate and Review this Product
160053
In stock
Most orders placed now ship next business day!
£2.29 ex VAT£2.75 inc UK VAT
Quantity
21
All our MWS centre lock wheel spinners are made from the highest quality materials and are precision engineered to ensure an accurate fit.

These two eared spinners with MG logo are 12 TPI (threads per inch) and fit 42mm hubs.

Two eared spinners can be fitted with a hammer or spanner. A spinner should be fitted with the wheel jacked up off the ground, so that the hub, wheel and spinner are all centralised. Apply the spinner by hand and tighten 3 to 3 ½ turns, give the spinner a couple of taps with a hammer, lower the wheel to the ground and give the spinner a couple of more taps. As long as the hubs are fitted correctly, then the spinner will self tighten and lock as the car is driving.

Please check local regulations for eared spinners.
Qty Req-2, Model-Chrome Bumper Roadsters to GHN3-30850 (to 1964)
Rate and Review this Product
AHH7317AMWS
In stock
Most orders placed now ship next business day!
£29.79 ex VAT£35.75 inc UK VAT
Quantity
21
All our MWS centre lock wheel spinners are made from the highest quality materials and are precision engineered to ensure an accurate fit.

These plain two eared spinners are 12 TPI (threads per inch) and fit 42mm hubs.

Two eared spinners can be fitted with a hammer or spanner. A spinner should be fitted with the wheel jacked up off the ground, so that the hub, wheel and spinner are all centralised. Apply the spinner by hand and tighten 3 to 3 ½ turns, give the spinner a couple of taps with a hammer, lower the wheel to the ground and give the spinner a couple of more taps. As long as the hubs are fitted correctly, then the spinner will self tighten and lock as the car is driving.

Please check local regulations for eared spinners.
Qty Req-2, Model-Chrome Bumper Roadsters to GHN3-30850 (to 1964)
Rate and Review this Product
AHH7317MWS
3 in stock
Most orders placed now ship next business day!
£30.83 ex VAT£37.00 inc UK VAT
Quantity
21
All our MWS centre lock wheel spinners are made from the highest quality materials and are precision engineered to ensure an accurate fit.

These two eared spinners with MG logo are 12 TPI (threads per inch) and fit 42mm hubs.

Two eared spinners can be fitted with a hammer or spanner. A spinner should be fitted with the wheel jacked up off the ground, so that the hub, wheel and spinner are all centralised. Apply the spinner by hand and tighten 3 to 3 ½ turns, give the spinner a couple of taps with a hammer, lower the wheel to the ground and give the spinner a couple of more taps. As long as the hubs are fitted correctly, then the spinner will self tighten and lock as the car is driving.

Please check local regulations for eared spinners.
Qty Req-2, Model-Chrome Bumper Roadsters to GHN3-30850 (to 1964)
Rate and Review this Product
AHH7318AMWS
In stock
Most orders placed now ship next business day!
£29.79 ex VAT£35.75 inc UK VAT
Quantity
21
All our MWS centre lock wheel spinners are made from the highest quality materials and are precision engineered to ensure an accurate fit.

These plain two eared spinners are 12 TPI (threads per inch) and fit 42mm hubs.

Two eared spinners can be fitted with a hammer or spanner. A spinner should be fitted with the wheel jacked up off the ground, so that the hub, wheel and spinner are all centralised. Apply the spinner by hand and tighten 3 to 3 ½ turns, give the spinner a couple of taps with a hammer, lower the wheel to the ground and give the spinner a couple of more taps. As long as the hubs are fitted correctly, then the spinner will self tighten and lock as the car is driving.

Please check local regulations for eared spinners.
Qty Req-2, Model-Chrome Bumper Roadsters to GHN3-30850 (to 1964)
Rate and Review this Product
AHH7318MWS
3 in stock
Most orders placed now ship next business day!
£30.83 ex VAT£37.00 inc UK VAT
Quantity
21
Dom's expert tip:

The basic idea with the eared centre "knock off" caps (2 & 3 eared) is you knock the heck out of the ears with the copper & hide hammer (KACH100) to tighten or loosen the cap.

Obviously with the octagonal caps there's nothing on them to knock the heck out of. This is what KAS42 is designed for. The idea being that you locate it on the octagonal centre cap & hit the handle with the hammer to tighten or loosen it.

RX1498 & RX1499 are a different concept. They are long bars with suitably designed ends to locate on either the octagonal (RX1499) or 2 eared (RX1498) centre caps. The longer bar gives better leverage meaning you don't need to knock the heck out of them with a hammer!

RX1498 is only suitable for the 2 eared caps & there is no version available for the 3 eared caps.
Eared centre caps not allowed in some countries. Use alternative Octagonal centres if in doubt.
Qty Req-2, Model-All Roadsters from GHN3-30851 on (1964 on), All GTs
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
KC4282R
In stock
Most orders placed now ship next business day!
£33.33 ex VAT£40.00 inc UK VAT
Quantity
21
Dom's expert tip:

The basic idea with the eared centre "knock off" caps (2 & 3 eared) is you knock the heck out of the ears with the copper & hide hammer (KACH100) to tighten or loosen the cap.

Obviously with the octagonal caps there's nothing on them to knock the heck out of. This is what KAS42 is designed for. The idea being that you locate it on the octagonal centre cap & hit the handle with the hammer to tighten or loosen it.

RX1498 & RX1499 are a different concept. They are long bars with suitably designed ends to locate on either the octagonal (RX1499) or 2 eared (RX1498) centre caps. The longer bar gives better leverage meaning you don't need to knock the heck out of them with a hammer!

RX1498 is only suitable for the 2 eared caps & there is no version available for the 3 eared caps.
Eared centre caps not allowed in some countries. Use alternative Octagonal centres if in doubt.
Qty Req-2, Model-All Roadsters from GHN3-30851 on (1964 on), All GTs
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
KC4282L
In stock
Most orders placed now ship next business day!
£33.33 ex VAT£40.00 inc UK VAT
Quantity
NI
Dom's expert tip:

The basic idea with the eared centre "knock off" caps (2 & 3 eared) is you knock the heck out of the ears with the copper & hide hammer (KACH100) to tighten or loosen the cap.

Obviously with the octagonal caps there's nothing on them to knock the heck out of. This is what KAS42 is designed for. The idea being that you locate it on the octagonal centre cap & hit the handle with the hammer to tighten or loosen it.

RX1498 & RX1499 are a different concept. They are long bars with suitably designed ends to locate on either the octagonal (RX1499) or 2 eared (RX1498) centre caps. The longer bar gives better leverage meaning you don't need to knock the heck out of them with a hammer!

RX1498 is only suitable for the 2 eared caps & there is no version available for the 3 eared caps.
Eared centre caps not allowed in some countries. Use alternative Octagonal centres if in doubt.
Qty Req-2, Model-All Roadsters from GHN3-30851 on (1964 on), All GTs
Rate and Review this Product
KC4282R3
2 in stock
Most orders placed now ship next business day!
£62.92 ex VAT£75.50 inc UK VAT
Quantity
NI
Dom's expert tip:

The basic idea with the eared centre "knock off" caps (2 & 3 eared) is you knock the heck out of the ears with the copper & hide hammer (KACH100) to tighten or loosen the cap.

Obviously with the octagonal caps there's nothing on them to knock the heck out of. This is what KAS42 is designed for. The idea being that you locate it on the octagonal centre cap & hit the handle with the hammer to tighten or loosen it.

RX1498 & RX1499 are a different concept. They are long bars with suitably designed ends to locate on either the octagonal (RX1499) or 2 eared (RX1498) centre caps. The longer bar gives better leverage meaning you don't need to knock the heck out of them with a hammer!

RX1498 is only suitable for the 2 eared caps & there is no version available for the 3 eared caps.
Eared centre caps not allowed in some countries. Use alternative Octagonal centres if in doubt.
Qty Req-2, Model-All Roadsters from GHN3-30851 on (1964 on), All GTs
Rate and Review this Product
KC4282L3
3 in stock
Most orders placed now ship next business day!
£62.92 ex VAT£75.50 inc UK VAT
Quantity
23
All our MWS centre lock wheel spinners are made from the highest quality materials and are precision engineered to ensure an accurate fit.

These octagonal spinners with MG logo are 12 TPI (threads per inch) and fit 42mm hubs.

A spinner spanner is required to apply/remove spinners without ears, such as octagonal (Continental) or Federal. The spanner fits over the spinner and is tightened/loosened with a hammer.
Qty Req-2, Model-Chrome Bumper Roadsters to GHN3-30850 (to 1964)
Rate and Review this Product
AHH7315AMWS
Usually in stock at our supplier, allow 1 week for delivery
£29.79 ex VAT£35.75 inc UK VAT
Quantity
23
All our MWS centre lock wheel spinners are made from the highest quality materials and are precision engineered to ensure an accurate fit.

These plain octagonal spinners are 12 TPI (threads per inch) and fit 42mm hubs.

A spinner spanner is required to apply/remove spinners without ears, such as octagonal (Continental) or Federal. The spanner fits over the spinner and is tightened/loosened with a hammer.
Qty Req-2, Model-Chrome Bumper Roadsters to GHN3-30850 (to 1964)
Rate and Review this Product
AHH7315MWS
1 in stock
Most orders placed now ship next business day!
£30.83 ex VAT£37.00 inc UK VAT
Quantity
23
All our MWS centre lock wheel spinners are made from the highest quality materials and are precision engineered to ensure an accurate fit.

These octagonal spinners with MG logo are 12 TPI (threads per inch) and fit 42mm hubs.

A spinner spanner is required to apply/remove spinners without ears, such as octagonal (Continental) or Federal. The spanner fits over the spinner and is tightened/loosened with a hammer.
Qty Req-2, Model-Chrome Bumper Roadsters to GHN3-30850 (to 1964)
Rate and Review this Product
AHH7316AMWS
Usually in stock at our supplier, allow 1 week for delivery
£29.79 ex VAT£35.75 inc UK VAT
Quantity
23
All our MWS centre lock wheel spinners are made from the highest quality materials and are precision engineered to ensure an accurate fit.

These plain octagonal spinners are 12 TPI (threads per inch) and fit 42mm hubs.

A spinner spanner is required to apply/remove spinners without ears, such as octagonal (Continental) or Federal. The spanner fits over the spinner and is tightened/loosened with a hammer.
Qty Req-2, Model-Chrome Bumper Roadsters to GHN3-30850 (to 1964)
Rate and Review this Product
AHH7316MWS
Usually in stock at our supplier, allow 1 week for delivery
£30.83 ex VAT£37.00 inc UK VAT
Quantity
23
Dom's expert tip:

The basic idea with the eared centre "knock off" caps (2 & 3 eared) is you knock the heck out of the ears with the copper & hide hammer (KACH100) to tighten or loosen the cap.

Obviously with the octagonal caps there's nothing on them to knock the heck out of. This is what KAS42 is designed for. The idea being that you locate it on the octagonal centre cap & hit the handle with the hammer to tighten or loosen it.

RX1498 & RX1499 are a different concept. They are long bars with suitably designed ends to locate on either the octagonal (RX1499) or 2 eared (RX1498) centre caps. The longer bar gives better leverage meaning you don't need to knock the heck out of them with a hammer!

RX1498 is only suitable for the 2 eared caps & there is no version available for the 3 eared caps.
Eared centre caps not allowed in some countries. Use alternative Octagonal centres if in doubt.
Qty Req-2, Model-All Roadsters from GHN3-30851 on (1964 on), All GTs
Rate and Review this Product
KC4280R
In stock
Most orders placed now ship next business day!
£27.08 ex VAT£32.50 inc UK VAT
Quantity
23
Dom's expert tip:

The basic idea with the eared centre "knock off" caps (2 & 3 eared) is you knock the heck out of the ears with the copper & hide hammer (KACH100) to tighten or loosen the cap.

Obviously with the octagonal caps there's nothing on them to knock the heck out of. This is what KAS42 is designed for. The idea being that you locate it on the octagonal centre cap & hit the handle with the hammer to tighten or loosen it.

RX1498 & RX1499 are a different concept. They are long bars with suitably designed ends to locate on either the octagonal (RX1499) or 2 eared (RX1498) centre caps. The longer bar gives better leverage meaning you don't need to knock the heck out of them with a hammer!

RX1498 is only suitable for the 2 eared caps & there is no version available for the 3 eared caps.
Eared centre caps not allowed in some countries. Use alternative Octagonal centres if in doubt.
Qty Req-2, Model-All Roadsters from GHN3-30851 on (1964 on), All GTs
Rate and Review this Product
KC4280L
3 in stock
Most orders placed now ship next business day!
£27.08 ex VAT£32.50 inc UK VAT
Quantity
Rate and Review this Product
AHH6297
In stock
Most orders placed now ship next business day!
£41.46 ex VAT£49.75 inc UK VAT
Quantity
Rate and Review this Product
GBC101B
In stock
Most orders placed now ship next business day!
£2.29 ex VAT£2.75 inc UK VAT
Quantity
24 month warranty
Worldwide shipping
Price Match
Customer Comments
"Great site, generally has all the info required about items to be able to positively order something." Customer Comment
Product Description

MGB Wheel Nuts & Centre Caps

Review: Tim Submitted: 28/01/2021

Overall5 out of 5 stars.
verified

Subject
Great Fit

Did this item work well with your project? What vehicle type are you using this for?
A good fit and smartened up the car nicely.

Review: Pietro Ginevra Submitted: 02/12/2020

Overall5 out of 5 stars.

Subject
Best quality

Did this item work well with your project? What vehicle type are you using this for?
Excellent item to rofurbish old spoke wheel parts

Review: Simon Ducker Submitted: 28/09/2020

Overall5 out of 5 stars.
verified

Subject
Good fit. Matches the others.

Did this item work well with your project? What vehicle type are you using this for?
Mgb gt