Triumph 2000/2500/2.5Pi Switches/Controls - Column Mounted

Order your Triumph 2000/2500/2.5Pi Switches/Controls - Column Mounted ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID008736

Prices displayed in:
In stock
Most orders placed now ship tomorrow!
£79.00 ex VAT£94.80 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£79.00 ex VAT£94.80 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£66.00 ex VAT£79.20 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£79.00 ex VAT£94.80 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£79.00 ex VAT£94.80 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£66.00 ex VAT£79.20 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£66.00 ex VAT£79.20 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£66.00 ex VAT£79.20 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£114.00 ex VAT£136.80 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£118.00 ex VAT£141.60 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£114.00 ex VAT£136.80 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£55.50 ex VAT£66.60 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£118.00 ex VAT£141.60 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£118.00 ex VAT£141.60 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£118.00 ex VAT£141.60 inc UK VAT
Quantity
Please Note:-

This is a multi application part and the shaft may protrude further through the facia than standard on some vehicles.
In stock
Most orders placed now ship tomorrow!
£69.50 ex VAT£83.40 inc UK VAT
Quantity
Please Note:-

This is a multi application part and the shaft may protrude further through the facia than standard on some vehicles.
In stock
Most orders placed now ship tomorrow!
£69.50 ex VAT£83.40 inc UK VAT
Quantity
Please Note:-

This is a multi application part and the shaft may protrude further through the facia than standard on some vehicles.
In stock
Most orders placed now ship tomorrow!
£69.50 ex VAT£83.40 inc UK VAT
Quantity
Please Note:-

This is a multi application part and the shaft may protrude further through the facia than standard on some vehicles.
In stock
Most orders placed now ship tomorrow!
£69.50 ex VAT£83.40 inc UK VAT
Quantity
Re-tooled and reintroduced by Rimmer Bros complete with two original type keys.
The lock is for RHD models.
For LHD version see 160337USA.
In stock
Most orders placed now ship tomorrow!
£114.00 ex VAT£136.80 inc UK VAT
Quantity
Re-tooled and reintroduced by Rimmer Bros comes complete with two original type keys.
The lock is for LHD models and features the additional electrical terminal fitted into the body of the column lock.
For RHD version see 160337.
In stock
Most orders placed now ship tomorrow!
£125.00 ex VAT£150.00 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£4.95 ex VAT£5.94 inc UK VAT
Quantity
The switch assembly is no longer available however, Part no. 158459 can be fitted. This replacement part has "Lucar" terminals, so the vehicle wiring loom will require minor modification. For USA models (Switch part number 219059), 158459 may also be used with similar wiring modifications.
With Lucar connections - 3 pairs and 1 single terminal

When used as a replacement for Stag MK1 (To LD20000 inc USA) Ignition Switch, to modify wiring, fit spade connectors to terminals 1, 2, 3 & 5 and transfer from original loom Brown wire to terminal 2, White & Pink to terminal 5, White to terminal 3 and White & Red to terminal 1. The remaining Red & Red/Green wires are for a sidelight functionality that prevents driving off with the sidelights only and can be insulated for safety and ignored.

This information is applicable to Stag MK1 (inc USA) only. Other models may require similar modifications if fitting this switch in place of one with the loom attached. Please refer to the appropriate workshop manual.
In stock
Most orders placed now ship tomorrow!
£39.00 ex VAT£46.80 inc UK VAT
Quantity
Please Note:

The wiring loom on this switch is shorter than the original and must be routed down the LH side of the column with no slack, to reach the connector. Not suitable for USA models - use 158459.
In stock
Most orders placed now ship tomorrow!
£39.00 ex VAT£46.80 inc UK VAT
Quantity
The switch assembly is no longer available however, Part no. 158459 can be fitted. This replacement part has "Lucar" terminals, so the vehicle wiring loom will require minor modification. For USA models (Switch part number 219059), 158459 may also be used with similar wiring modifications.
With Lucar connections - 3 pairs and 1 single terminal

When used as a replacement for Stag MK1 (To LD20000 inc USA) Ignition Switch, to modify wiring, fit spade connectors to terminals 1, 2, 3 & 5 and transfer from original loom Brown wire to terminal 2, White & Pink to terminal 5, White to terminal 3 and White & Red to terminal 1. The remaining Red & Red/Green wires are for a sidelight functionality that prevents driving off with the sidelights only and can be insulated for safety and ignored.

This information is applicable to Stag MK1 (inc USA) only. Other models may require similar modifications if fitting this switch in place of one with the loom attached. Please refer to the appropriate workshop manual.
In stock
Most orders placed now ship tomorrow!
£39.00 ex VAT£46.80 inc UK VAT
Quantity
Please Note:

The wiring loom on this switch is shorter than the original and must be routed down the LH side of the column with no slack, to reach the connector. Not suitable for USA models - use 158459.
In stock
Most orders placed now ship tomorrow!
£39.00 ex VAT£46.80 inc UK VAT
Quantity
Please Note:

The wiring loom on this switch is shorter than the original and must be routed down the LH side of the column with no slack, to reach the connector. Not suitable for USA models - use 158459.
In stock
Most orders placed now ship tomorrow!
£39.00 ex VAT£46.80 inc UK VAT
Quantity
Please Note:

The wiring loom on this switch is shorter than the original and must be routed down the LH side of the column with no slack, to reach the connector. Not suitable for USA models - use 158459.
In stock
Most orders placed now ship tomorrow!
£39.00 ex VAT£46.80 inc UK VAT
Quantity
In stock
Most orders placed now ship tomorrow!
£5.75 ex VAT£6.90 inc UK VAT
Quantity
Customer Comments
"Effective website. Easy order process. Reasonable shipping charge. Value your 'how to' YouTube vids too!." Customer Comment
Product Description

Triumph 2000/2500/2.5Pi Switches/Controls - Column Mounted