Triumph TR7 Clutch Drive Components

Order your Triumph TR7 Clutch Drive Components ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID006042

Prices displayed in:
Rate and Review this Product
RB7038
Out of stock, expected soon. Add to cart and Back Order
£118.00 ex VAT£141.60 inc UK VAT
Quantity
Suitable for LT77 & R380 5 speed manual gearboxes as fitted to:-

Triumph TR7
Triumph TR8
Triumph Dolomite 1850 (single rail gearboxes only)
Rover SD1
Land Rover Discovery 1
Range Rover Classic

NB Not suitable for MGB GT V8
Qty Req-1, Model-5 Speed
Rate and Review this Product
RX1386B
In stock
£7.05 ex VAT£8.46 inc UK VAT
Quantity
This revolutionary tool makes quick work of accurately aligning the clutch and pressure plate before fitting. Fits most vehicles up to 5 tons except vehicles with double plate clutches. Body manufactured from ABS with brassed screw and supplied with three collets. A full instruction leaflet is included with each tool. Display packed.
Qty Req-1
Rate and Review this Product
RX1702
In stock
£15.40 ex VAT£18.48 inc UK VAT
Quantity
Road Uprated Clutch Cover uses stronger diaphragm spring and platum plate for better control and reliability.
Qty Req-1
Rate and Review this Product
GCC228UR
No longer available
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GCP229
Out of stock, expected soon. Add to cart and Back Order
£68.00 ex VAT£81.60 inc UK VAT
Quantity
Clutch release bearing carrier
NOTE: on early vehicles LBU1234 and FRC5369 MUST be fitted as a pair
Qty Req-1
Rate and Review this Product
FRC5369A
This part has been superseded
Use FRC5369AU
If your clutch pedal goes soft all of a sudden and stops operating the clutch, check this arm, the pivot pin UKC13 can punch through the dimple in the fork. This uprated version (sold for Land Rover applications) has a bar welded across this part to improve the strength in this area.

For all Triumph and Rover 2WD applications it is important to adjust the gap between the pins on this fork to exactly
42mm to ensure correct slipper pad location. Then check the fit of your release bearing into the fork, it should be snug but not tight.
Qty Req-1
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
LBU1234
In stock
£61.50 ex VAT£73.80 inc UK VAT
Quantity
NOTE: on early vehicles LBU1234 and FRC5369 MUST be fitted as a pair
Qty Req-1
Rate and Review this Product
UKC1774
This part has been superseded
Use UKC1774U
NOTE: on early vehicles LBU1234 and FRC5369 MUST be fitted as a pair
Qty Req-1
Rate and Review this Product
UKC1774U
No longer available

Related Items

Brake and Clutch Fluid - DOT 3 - 1L Synthetic - GBF103 - TRW
Brake and Clutch Fluid - DOT 3 - 1L Synthetic - GBF103 - TRW
£7.60 ex VAT£9.12 inc UK VAT
Silicone Brake or Clutch Fluid - DOT 5 - 1 Litre - RX1326 - Automec
Silicone Brake or Clutch Fluid - DOT 5 - 1 Litre - RX1326 - Automec
£41.50 ex VAT£49.80 inc UK VAT
Copper Grease 70g - RX1345
Copper Grease 70g - RX1345
£5.45 ex VAT£6.54 inc UK VAT
Clutch Alignment Tool (23 spline x 1") - RX1386B
Clutch Alignment Tool (23 spline x 1") - RX1386B
£7.05 ex VAT£8.46 inc UK VAT
Guide Pin Grease 70g - RX1345B
Guide Pin Grease 70g - RX1345B
£8.00 ex VAT£9.60 inc UK VAT
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Great selection and stock of parts, with fast shipping and good customer service." Customer Comment
Product Description

Triumph TR7 Clutch Drive Components
See also; Transmission & Axles for further details of clutch release mechanism.