Product Description
Triumph Stag Fascia Veneer Sets
Supplied with either Burr Walnut or the more traditional American Walnut /Teak veneer, our 7-piece fascia veneer sets will enhance the interior of your Stag. Supplied as a vehicle set for both RHD and LHD vehicles with either manual or automatic gearbox.
Originally, the standard veneer finish was American Walnut and not Teak. However, this fades over time to an orange yellow colour that resembles Teak. The Burr Walnut is now a popular alternative.
There are many variations of instrument panel depending on the model year and destination the vehicle was supplied to which are not particularly well documented in the factory data available. Therefore, it is important that you check the layout of the warning lights on your instrument panel and confirm with the descriptions alongside each type. Also see Special Note below. If unsure, please contact us.
Model Identification:
Mk1 Models
Glove box lid has aperture for map light. Brake warning light is upper centre of the instrument panel between speedo and rev counter.
Mk2 Early Models
No aperture for glove box lid map light and brake warning light is upper centre of the instrument panel between speedo and rev counter.
Mk2 Late Models
No aperture for glove box lid map light, seat belt warning light added to upper centre of instrument panel between speedo and rev counter, hazard warning light added to lower centre of instrument panel between speedo and rev counter and brake warning light is moved to lower right of instrument panel and reduced in size to ½ inch.
Special Note - all Models:
RHD:
Veneer sets are suitable for RHD UK Spec vehicles. For other RHD markets (inc. Australia), check positioning of dash warning lamps. Please supply chassis number and photograph of existing instrument panel to confirm correct application. Veneers for Australian models may require specially manufacturing as there is normally no provision for a brake warning light on the dash on later models.
LHD:
For USA models, check positioning of dash warning lamps. Please supply chassis number and photograph of existing instrument panel to confirm correct application.