Triumph Stag Bonnet & Bulkhead Insulation Pads and Fittings

Order your Triumph Stag Bonnet & Bulkhead Insulation Pads and Fittings ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID005390

Prices displayed in:
This insulation pad helps to reduce the amount of engine noise escaping from under the bonnet.
Don't worry, you can still hear the glorious soundtrack of the V8 engine!

The layer of insulation also helps to insulate the engine to a small extent from extremes of temperature outside of the vehicle.
Qty Req-1
Rate and Review this Product
910733
In stock
Most express orders ship today!
£222.50 ex VAT£267.00 inc UK VAT
Quantity
Includes 4 retaining plates, retaining bar & 14 rivets
Qty Req-1
Rate and Review this Product
910733FK
In stock
Most express orders ship today!
£44.00 ex VAT£52.80 inc UK VAT
Quantity
Includes pad, 4 retaining plates, retaining bar & 14 rivets
Qty Req-1
Rate and Review this Product
910733K
In stock
Most express orders ship today!
£235.00 ex VAT£282.00 inc UK VAT
Quantity
Rate and Review this Product
626498
In stock
Most express orders ship today!
£6.05 ex VAT£7.26 inc UK VAT
Quantity
Rate and Review this Product
626498K
In stock
Most express orders ship today!
£24.50 ex VAT£29.40 inc UK VAT
Quantity
Rate and Review this Product
717687
In stock
Most express orders ship today!
£19.00 ex VAT£22.80 inc UK VAT
Quantity
Rate and Review this Product
556141
In stock
Most express orders ship today!
£0.37 ex VAT£0.44 inc UK VAT
Quantity
Rate and Review this Product
GHF1083
In stock
Most express orders ship today!
£1.20 ex VAT£1.44 inc UK VAT
Quantity
Consider RX1473A ,RX1473B or RX1473C as alternatives
Qty Req-1
Rate and Review this Product
910904
No longer available
Consider RX1473A, RX1473B or RX1473C as alternatives
Qty Req-1
Rate and Review this Product
634195
No longer available
1 pad. General purpose sound insulation pad for panelwork such as doors, bootlids, floors, bulkheads etc. Self adhesive. To fit to contours, warm up prior to fitting (put in sun if its shining!).
Qty Req-1
Rate and Review this Product
RB7145
In stock
Most express orders ship today!
£6.15 ex VAT£7.38 inc UK VAT
Quantity
Kit of 5 pads. General purpose sound insulation pad for panelwork such as doors, bootlids, floors, bulkheads etc. Self adhesive. To fit to contours, warm up prior to fitting (put in sun if its shining!).
Qty Req-a/r
Rate and Review this Product
RB7145K5
In stock
Most express orders ship today!
£26.50 ex VAT£31.80 inc UK VAT
Quantity
Kit of 10 pads. General purpose sound insulation pad for panelwork such as doors, bootlids, floors, bulkheads etc. Self adhesive. To fit to contours, warm up prior to fitting (put in sun if its shining!).
Qty Req-a/r
Rate and Review this Product
RB7145K10
In stock
Most express orders ship today!
£51.50 ex VAT£61.80 inc UK VAT
Quantity
Please Note: The spreaders that are noted on the tin as included with the adhesive are supplied separately (Part number RX1353SPREADER).

Restricted Item

Due to the hazardous nature of this item, it cannot be exported.

We can ONLY ship via UPS Carrier to England, Scotland & Wales, mainland destinations only - NO ISLANDS. )

This item CANNOT be sent by air or via the Royal Mail.

A Minimum Carriage Charge of £7.95 will apply.
Qty Req-a/r
Only Available for Delivery by UPS to Mainland United Kingdom Destinations
Rate and Review this Product
RX1353
In stock
Most express orders ship today!
£20.25 ex VAT£24.30 inc UK VAT
Quantity
Rate and Review this Product
RX1353SPREADER
In stock
Most express orders ship today!
£0.83 ex VAT£1.00 inc UK VAT
Quantity
This is a CFC free, multipurpose sprayable adhesive with low odour, developed to bond to a wide variety of substrates. It has excellent grab, good heat resistance and a long open time.

Trim Spray will bond:
  • Wood
  • Metals
  • Rubber
  • Fabric
  • Most Plastics
  • Cardboard
  • Polythene
  • Concrete
  • As well as decorative laminates
This makes the adhesive highly suitable for trimming in most types of vehicles. It can also be used to bond expanded polystyrene when forming a bond to a different substrate, in this instance the product should be used as a one way stick and only applied to the opposite substrate (do not spray onto the expanded polystyrene).

It is ideal for permanent bonds that require good initial bond strength. It provides good temperature resistance and if protected from contamination has an open time of several hours.

Restricted Item

Due to the hazardous nature of this item, it cannot be exported.

We can ONLY ship via UPS Carrier to England, Scotland & Wales, mainland destinations only - NO ISLANDS. )

This item CANNOT be sent by air or via the Royal Mail.

A Minimum Carriage Charge of £7.95 will apply.
Qty Req-a/r
Only Available for Delivery by UPS to Mainland United Kingdom Destinations
Rate and Review this Product
RX1353A
In stock
Most express orders ship today!
£8.15 ex VAT£9.78 inc UK VAT
Quantity

Related Items

DEI Insulation Material - 2 feet x 21 inch - RX1473A
DEI Insulation Material - 2 feet x 21 inch - RX1473A
£63.00 ex VAT£75.60 inc UK VAT
DEI Insulation Material - 4 feet x 21 inch - RX1473B
DEI Insulation Material - 4 feet x 21 inch - RX1473B
£119.00 ex VAT£142.80 inc UK VAT
DEI Insulation Material - 4 feet x 42 inch - RX1473C
DEI Insulation Material - 4 feet x 42 inch - RX1473C
£230.00 ex VAT£276.00 inc UK VAT
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Have been a Rimmer Bros customer for around 10 years, always pleased with the service and help from staff." Customer Comment
Product Description

Triumph Stag Bonnet & Bulkhead Insulation Pads and Fittings

Review: Phil Newton Submitted: 07/12/2021

Overall5 out of 5 stars.
verified

Subject
perfect fit

Did this item work well with your project? What vehicle type are you using this for?
great product fits the stag perfectly

Review: Snorbens Mark Submitted: 11/02/2021

Overall5 out of 5 stars.
verified

Subject
Quality looking product

Did this item work well with your project? What vehicle type are you using this for?
Bought this in a sale and glad I did. Quality preformed pad that fits into the bonnet very well. All the bits in the kit look good quality and the bar particularly gives a bit more torsional rigidity to the bonnet. Easy to fit, all in all, very happy with the purchase. Does it make a difference to drive? I think so, it may be marginal but I have not driven far with it yet.