Inward Facing Tip-Up Seat Camel Vinyl - EXT050CML - Exmoor

Inward Facing Tip-Up Seat Camel Vinyl - EXT050CML - Exmoor
The Classic Inward facing Tip-Up seats have been fitted to Land Rover's since the late 1950's and were used in production right through to 2007 when the rear seats then changed to a forward facing design. Though the design in essence never changed through the years.

All the metal work is E.D Plated (electro dipping) to ensure inside and outside of all the metal work is protected evenly before we then Powder Coat on top of this coating again to ensure the best possible result for the rigours of Land Rover life.

The seat base is pre-assembled to provide an easy to install unit but the seat back brackets will require assembly and adjustment to fit your particular Land Rover. The seats are supplied with all their fixtures and fittings down to a good fitting guide and a stowaway retaining strap.

These seats must only be fitted in conjunction with a suitable seat belt. These "must" be either a standard lap type belt with adjustment or a good upgrade is to install retractable lap belts which do save the seat belts from being loose on the wheel arches when not in use and retract into their reel housing.

The Lap belt is a standard fitment however if you are using these for youngsters then we do recommend the retractable lap belts as these will automatically adjust to the individual as a retractable belt will (for instance a drivers belt will adjust and lock).

It is not recommended in any circumstances that a harness or a 3 or 4 point off the shoulder belts are used they are very dangerous on side facing seats. Neither is it recommended that booster or child seats are used in conjunction with these seats as they must only be used on forward facing seating.