Product Description
Cavity Protection Wax Brown 500ml Aerosol - DA1958 - Dinitrol
Closed cavities, doors and other parts
Penetrating cavity wax
500ml aerosol
Brown
Dinitrol ML is a brown penetrating cavity wax ideal for rust-proofing for doors, frame members, exterior joints and crevices.
This oil based brown coloured product is specially designed for applying into closed cavities such as doors, frame members and exterior joints and crevices. Dinitrol ML is a penetrating cavity wax ideal for rust-proofing second-hand vehicles. Can be used as a pre-treatment for Dinitrol 3125HS on more corroded surfaces after prior application of Dinitrol RC900 Converust.
Characteristics
- Extremely Penetrating
- Stops ongoing corrosion
- Water displacing
- Oily, flexible film
- Wet in wet with bitumen vehicle underbody coating
Method of Use
DINITROL ML is applied by spraying with manual or semi-automatic. DINITROL application equipment, and is suitable for either air-mixed or airless spraying.
Specifications
- Colour: Brown
- Type of film: Oily, greasy
- Density at 23°C: 860 kg/m³
- Viscosity at 23°C, DIN 2: 60 s
- Dry matter content: 46 % by weight
- Flash point: 40°C
- Aromatic content in solvent: < 1 %
- Recommended film thickness wet: 30 μm
- Recommended layer thickness: 10 μm
- Drying time: 1h
- Low temperature adhesion: < - 40°C
- Effect on car paint: None
- Removability: White Spirit
- Salt spray test: > 96 h
- Penetration 50 μm gap: > 70 mm
Restricted shipping UK mainland only!