Wire Wheel Hub LH Front - C19226/1MWS - MWS

Wire Wheel Hub LH Front - C19226/1MWS - MWS
A centre-lock wire wheel is fitted onto a car axle using a splined hub; the splines (or serrations) of the hub lock with the splines on the inside of the wheel centre to produce drive. Splined hubs may be integral fitting or bolt-on. Please refer to the vehicle's service manual for instructions on fitting integral splines.

When putting a centre-lock wheel onto a splined hub, the splined area inside of the wheel centre must be greased to ease the wheel on and prevent the two surfaces corroding together. All new MWS centre-lock wheels from stock are provided pre-greased; ready to go on the car. If a stock wheel has been repainted then as part of the process it has to be degreased and it will need fresh grease applying before fitting to the vehicle.