Stub Axle Assembly LH New - BTA745ASSY

Stub Axle Assembly LH New - BTA745ASSY
King Pin & Stub Axle assembly using all new components.

Includes:-
King Pins
Stub Axle
Upper Trunnion

Supplied fully assembled, shimmed to the correct tolerance and with honed bushes for the lower trunnion tubes.

Please note:- The trunnion is required to be turned 180 degrees. The assembly is pre-shimmed so will be stiff to turn the trunnion they do move. You can do this with a long screw driver in the trunnion and a vice to hold the king pin. You also have the option of undoing the nyloc nut only a 1/4 turn, just make sure you do it back up to the same position (can be marked using a marker pen or Tipex).