Rover V8 Timing Cover and Fittings

Illustrated Items Not Listed Are Currently Not Available
 GRID800006
  • Rover V8 Timing Cover and Fittings

Prices displayed in:
1
Front Engine Cover with larger oil pump gears.
Complete with gasket fitting kit.
Use 10W/40 oil.
Qty Req-1, Model-Saloon/Sports up to 1976
1
For short gear oil pump.

Specially cast cover to accommodate larger oil pump gears - includes gears, gaskets & seal.

Use 10W/40 oil.
Qty Req-1, Model-Saloon/Sports up to 1976
Out of stock, expected soon Mar 19, 2025. Add to cart and Back Order
£405.00 ex VAT
£486.00 inc UK VAT
Quantity
1
For long gear oil pump.
Saloon/Sports V8 1976 on
Qty Req-1, Model-Saloon/Sports 1976 on Except MGR V8
This conversion kit allows post 1976 applications to benefit from the new high capacity oil pump.
High volume oil pump with longer gears than standard SD1 type oil pump.
Brand new front cover and conversion components.
Includes oil pump gears, gaskets and seals to suit.
Also includes standard points type distributor.
Retain and re-use roll pin.
Use 10W40 engine oil.
Qty Req-1
This conversion kit allows post 1976 applications to benefit from the new high capacity oil pump.
High volume oil pump with longer gears than standard SD1 type oil pump.
Brand new front cover and conversion components.
Includes oil pump gears, gaskets and seals to suit.
Retain and re-use roll pin.
Use 10W40 engine oil.

The front cover within this kit does not have the provision for power steering or crankshaft sensor.

Also includes a fully programmable 123Ignition distributor with tooth drive.

If you want to tune your engine, or you have an engine for which there is no standard distributor available.....the new 123\TUNE is the answer ! By connecting it to a computer, the end-user can easily adapt the 123\TUNE to fulfill even the most demanding requirements. The unit offers two sets of curves that can be selected by placing 12 Volt on a wire from the 123\TUNE.
( Handy, if you're driving on two different fuels, like regular fuel with LPG or with Ethanol )

Here are all the features offered :

rotation CW and CCW ( autodetect )
for 6 Volt and/or 12 Volt cars ( autodetect )
variable dwell constant current, fully autom. ( autodetect )
coil current protection time-out after 1 second ( autodetect )
spark-balancing: better than 0,5 degr. crankshaft
for positive and negative earthed cars ( 123\TUNE-8 is for neg.earth ONLY )
two centrifugal advance curves ( 500 to 8000 rpm )
two vacuum-advance and boost-retard curves ( 0 to 200 kPa or -30 inHg to +15 psi )
two MAP-start fields
two rev.limiters ( advanced random spark stealing )
real-time tuning under keyboard-control ( ideal for working on a rolling road )
rpm-stopwatch ( ideal for tuning using the road itself as a rolling road )
luxurious import-from-file and export-to-file ( curves can easily be exchanged over the internet )

electronic "dashboard" with:
temperature gauge ( selectable in degrees Celsius or Fahrenheit )
manifold pressure ( selectable in Bar or inches Hg / Psi )
rev. counter ( 0 to 8000 rpm crankshaft )
spark-energy gauge ( primary coil current )
total-advance gauge ( in degrees crankshaft )
Qty Req-1
Out of stock, expected soon Mar 19, 2025. Add to cart and Back Order
£760.00 ex VAT
£912.00 inc UK VAT
Quantity
This conversion kit allows post 1976 applications to benefit from the new high capacity oil pump.
High volume oil pump with longer gears than standard SD1 type oil pump.
Brand new front cover and conversion components.
Includes oil pump gears, gaskets and seals to suit.
Also includes Mallory Dual Points type distributor.
Retain and re-use roll pin.
Use 10W40 engine oil.
Qty Req-1
1
Intermediate Engines with Crank Driven Pump & Distributor
Engine nos: 35D08928B, 36D25155B, 37D02090B, 38D27238B & 40D09582B on.
Qty Req-1, Model-4x4, 3.9 & 4.2 from 1994 on
1
Qty Req-1, Model-4x4, 4.0 & 4.6 up to 1999
Usually in stock at our supplier, allow 2-3 working days for despatch
£553.24 ex VAT
£663.89 inc UK VAT
Quantity
1
Qty Req-1, Model-4x4, 4.0 & 4.6 from 1999 to 2002
£507.39 ex VAT
£608.87 inc UK VAT
Quantity
1
Qty Req-1, Model-4x4 & 4.0 from 2002 on
Usually in stock at our supplier, allow 2-3 working days for despatch
£498.50 ex VAT
£598.20 inc UK VAT
Quantity
1
Qty Req-1, Model-4x4 & 4.0 from 2002 on
£162.50 ex VAT
£195.00 inc UK VAT
Quantity
1
Qty Req-1, Model-4x4 & 4.0 from 2002 on
£235.00 ex VAT
£282.00 inc UK VAT
Quantity
2
Required if fitting 4.0 or 4.6 engine with pre-’94 (i.e. non-serpentine belt) timing cover. Fits behind pulley.
Qty Req-1
Out of stock, expected soon Apr 09, 2025. Add to cart and Back Order
£38.00 ex VAT
£45.60 inc UK VAT
Quantity
3
Qty Req-1, Model-Saloon/Sports, 4x4 & MGR V8
£4.35 ex VAT
£5.22 inc UK VAT
Quantity
3
Qty Req-1, Model-3.9 & 4.2 Litre 1994 on
£28.52 ex VAT
£34.22 inc UK VAT
Quantity
3
The Gasket Front Cover ERR7280P is a high-quality aftermarket component designed to fit the 4.0L and 4.6L Land Rover Engines. This is the front cover with the oil pump pre mounted within the cover. This gasket plays a crucial role in sealing the front cover of the engine, preventing oil leaks and ensuring optimal engine performance. Crafted with precision and built to meet or exceed OEM specifications, this aftermarket gasket is a reliable solution for maintaining the integrity of your Land Rover or Range Rover engine.
  • Precision Design
  • Oil Leak Prevention
  • Gasket Front Cover for Land Rover Models 4.0L-4.6L Engines
Qty Req-1, Model-3.9 & 4.2 Litre 1994 on
£3.30 ex VAT
£3.96 inc UK VAT
Quantity
3
Qty Req-1, Model-3.9 & 4.2 Litre 1994 on
£6.85 ex VAT
£8.22 inc UK VAT
Quantity
3
Qty Req-1, Model-4.0 & 4.6 Litre
£28.52 ex VAT
£34.22 inc UK VAT
Quantity
3
The Gasket Front Cover ERR7280P is a high-quality aftermarket component designed to fit the 4.0L and 4.6L Land Rover Engines. This is the front cover with the oil pump pre mounted within the cover. This gasket plays a crucial role in sealing the front cover of the engine, preventing oil leaks and ensuring optimal engine performance. Crafted with precision and built to meet or exceed OEM specifications, this aftermarket gasket is a reliable solution for maintaining the integrity of your Land Rover or Range Rover engine.
  • Precision Design
  • Oil Leak Prevention
  • Gasket Front Cover for Land Rover Models 4.0L-4.6L Engines
Qty Req-1, Model-4.0 & 4.6 Litre
£3.30 ex VAT
£3.96 inc UK VAT
Quantity
3
Qty Req-1, Model-4.0 & 4.6 Litre
£6.85 ex VAT
£8.22 inc UK VAT
Quantity
4
For Saloon & Sports V8 Engines.
Qty Req-1, Model-Saloon/Sports Except MGR V8
£4.75 ex VAT
£5.70 inc UK VAT
Quantity
4
For 4x4 V8 Engines. (early type). Press fit seal with no retainer.
Qty Req-1, Model-4x4 Early Type
£2.55 ex VAT
£3.06 inc UK VAT
Quantity
4
For 4x4 V8 Engines. (except early type). With screw-on mud shield.
Qty Req-1, Model-All Other 4x4 & MGR V8
£27.58 ex VAT
£33.10 inc UK VAT
Quantity
4
For 4x4 V8 Engines. (except early type). With screw-on mud shield.
Qty Req-1, Model-All Other 4x4 & MGR V8
£2.70 ex VAT
£3.24 inc UK VAT
Quantity
4
For 4x4 V8 Engines. (except early type). With screw-on mud shield.
Qty Req-1, Model-All Other 4x4 & MGR V8
£4.70 ex VAT
£5.64 inc UK VAT
Quantity
5
4x4 only
Qty Req-1, Model-4x4 Engines Only, where fitted
5
Qty Req-1, Model-4x4 Engines Only, where fitted
£6.85 ex VAT
£8.22 inc UK VAT
Quantity
7
Saloon/Sports
Qty Req-1, Model-Saloon/Sports Except MGR V8
8
Qty Req-2, timing pointer
£0.38 ex VAT
£0.46 inc UK VAT
Quantity
9
£0.13 ex VAT
£0.16 inc UK VAT
Quantity
10
The Washer RTC609 is a precision-engineered component tailored to fit seamlessly into Triumph TR8, Rover SD1, and Rover V8 vehicles. This washer serves a vital role in ensuring the integrity and functionality of critical automotive systems. Crafted with precision and compatibility in mind, the RTC609 washer is designed to meet the unique specifications of these specific vehicle models.
  • Sump Pan and Timing Cover Washer
Qty Req-2, timing pointer
£0.55 ex VAT
£0.66 inc UK VAT
Quantity
11
Spanner size 1/2 AF
Hexagon Headed
18tpi
Qty Req-1, Model-Saloon/Sports, timing cover to block
£1.65 ex VAT
£1.98 inc UK VAT
Quantity
11
Qty Req-1, Model-Saloon/Sports, timing cover to block
£3.85 ex VAT
£4.62 inc UK VAT
Quantity
11
Spanner size 1/2 AF
Hexagon Headed
18tpi
Qty Req-3, Model-Saloon/Sports, timing cover to block
£0.85 ex VAT
£1.02 inc UK VAT
Quantity
11
Spanner size 1/2 AF
Hexagon Headed
18tpi
Qty Req-1, Model-4x4 3.5 & 3.9 up to 1992, timing cover to block
£1.65 ex VAT
£1.98 inc UK VAT
Quantity
11
Qty Req-1, Model-4x4 3.5 & 3.9 up to 1992, timing cover to block
11
Qty Req-1, Model-4x4 3.5 & 3.9 up to 1992, timing cover to block
£2.90 ex VAT
£3.48 inc UK VAT
Quantity
11
Spanner size 1/2 AF
Hexagon Headed
18tpi
Qty Req-3, Model-4x4 3.5 & 3.9 up to 1992, timing cover to block
£1.30 ex VAT
£1.56 inc UK VAT
Quantity
£9.41 ex VAT
£11.29 inc UK VAT
Quantity
12
Qty Req-5, Model-Saloon/Sports & 4x4 up to 1992, timing cover
£0.12 ex VAT
£0.14 inc UK VAT
Quantity
13
Qty Req-1, Model-All Except 4.0 & 4.6 Litre, timing cover to block
£0.20 ex VAT
£0.24 inc UK VAT
Quantity
14
Qty Req-1, Model-All Except 4.0 & 4.6 Litre, timing cover to block
£2.60 ex VAT
£3.12 inc UK VAT
Quantity
15
Qty Req-2, Model-All Except 4.0 & 4.6 Litre
£2.43 ex VAT
£2.92 inc UK VAT
Quantity
16
Qty Req-2, timing cover to block
£0.65 ex VAT
£0.78 inc UK VAT
Quantity
17
Fuel Pump
Qty Req-1, Model-Early Engines Fitted with Electric Fuel Pump
£8.70 ex VAT
£10.44 inc UK VAT
Quantity
£0.89 ex VAT
£1.07 inc UK VAT
Quantity
Customer Comments
"Excellent service, I wouldn't use anyone else!" Customer Comment
Product Description

Rover V8 Timing Cover and Fittings
Timing Cover Identification (to 1994)
There are 2 main types of timing cover, fitted up to late 1994:
1. saloon/sports, as fitted to Rover saloons & Triumph TR8s.
2. 4x4, as fitted to Range Rovers and Land Rovers.

The saloon/sports version has a more compact water pump, mounted lower down for improved bonnet clearance. The  4x4 version has a water pump mounted higher up. In addition, the 4x4 timing cover usually has a mud shield to protect the front crank oil seal.
Both types will fit all versions of the engine (providing suitable ancillaries are available) and both types are further categorised as follows:
The timing cover fitted to early vehicles (prior to 1976) incorporates an oil pump gear-housing designed for the early, "short" oil pump gears (refer to Oil Pump).
Later timing covers have a deeper gear-housing, accommodating the longer pump gears used from the SD1 (1976) until the introduction of the crank-driven oil pump (late 1994 - see below). Although the two types of timing cover are interchangeable, the oil pump gears and distributor would also need to be changed.
If, however, uprating the early (pre 1976) oil pump is your intention, purchase Oil Pump Kit RB7480, which contains a spacer plate and longer gears, along with the correct distributor drive, designed specifically for the early timing cover. (RB7480 is not suitable for later timing covers, 1976 onwards).

Timing Cover Identification (1994 on)
The timing cover fitted to the Series 2 Range Rover is of an updated design, unsuitable for earlier models due to the fact that there is no provision for a distributor.
There is, however, an "intermediate" timing cover, fitted to late 3.9 and 4.2 models immediately prior to the introduction of the Series 2 Range Rover, which includes a combination of features from both types, such as the crank-driven oil pump and conventional distributor. Although this timing cover will fit earlier models, it can be considered as unsuitable, as the oil pump drive requires a "long-nose" crank, not fitted to earlier engines.
1994 on variations can easily be identified by the serpentine drive belt.

Unsure what part you need?

Contact our team of experts to talk makes, models, performance, and parts!! With over 42 years in business, our team are here to help you rebuild, restore, and maintain your car.

Contact our team to talk makes, models, performance, and parts!!