MGF and MG TF Interior Carpet and Fittings

Order your MGF and MG TF Interior Carpet and Fittings ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID019051

Prices displayed in:
The original Factory moulding tools are gone. However, new moulding tools have been developed and we can now offer you a brand new carpet set in a range of colours never available before. The original carpets did not fit that well, so certain areas have been modified to improve the fit.This kit includes the two main floor carpets and a matching rear bulkhead piece of carpet. Fitting instructions are also included.

On these models, there is a 6 piece sound deadening kit under the moulded footwells. Most MGF's leak water, so before ordering your new carpet, may we suggest that you peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces. We can offer you a new insulation kit if required. (Part no. RP1109) To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section. A Torx no. 50 spanner, a Philips, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.

 
Qty Req-1
Rate and Review this Product
RP1107BLACK
In stock
Most orders placed now ship tomorrow!
£205.00 ex VAT£246.00 inc UK VAT
Quantity
The original Factory moulding tools are gone. However, new moulding tools have been developed and we can now offer you a brand new carpet set in a range of colours never available before. The original carpets did not fit that well, so certain areas have been modified to improve the fit.This kit includes the two main floor carpets and a matching rear bulkhead piece of carpet. Fitting instructions are also included.

On these models, there is a 6 piece sound deadening kit under the moulded footwells. Most MGF's leak water, so before ordering your new carpet, may we suggest that you peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces. We can offer you a new insulation kit if required. (Part no. RP1109) To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section. A Torx no. 50 spanner, a Philips, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.

 
Qty Req-1
Rate and Review this Product
RP1107GREY
In stock
Most orders placed now ship tomorrow!
£197.50 ex VAT£237.00 inc UK VAT
Quantity
The original Factory moulding tools are gone. However, new moulding tools have been developed and we can now offer you a brand new carpet set in a range of colours never available before. The original carpets did not fit that well, so certain areas have been modified to improve the fit.This kit includes the two main floor carpets and a matching rear bulkhead piece of carpet. Fitting instructions are also included.

On these models, there is a 6 piece sound deadening kit under the moulded footwells. Most MGF's leak water, so before ordering your new carpet, may we suggest that you peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces. We can offer you a new insulation kit if required. (Part no. RP1109) To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section. A Torx no. 50 spanner, a Philips, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.

 
Qty Req-1
Rate and Review this Product
RP1107BISCUIT
In stock
Most orders placed now ship tomorrow!
£197.50 ex VAT£237.00 inc UK VAT
Quantity
The original Factory moulding tools are gone. However, new moulding tools have been developed and we can now offer you a brand new carpet set in a range of colours never available before. The original carpets did not fit that well, so certain areas have been modified to improve the fit.This kit includes the two main floor carpets and a matching rear bulkhead piece of carpet. Fitting instructions are also included.

On these models, there is a 6 piece sound deadening kit under the moulded footwells. Most MGF's leak water, so before ordering your new carpet, may we suggest that you peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces. We can offer you a new insulation kit if required. (Part no. RP1109) To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section. A Torx no. 50 spanner, a Philips, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.

 
Qty Req-1
Rate and Review this Product
RP1107BRG
In stock
Most orders placed now ship tomorrow!
£197.50 ex VAT£237.00 inc UK VAT
Quantity
The original Factory moulding tools are gone. However, new moulding tools have been developed and we can now offer you a brand new carpet set in a range of colours never available before. The original carpets did not fit that well, so certain areas have been modified to improve the fit.This kit includes the two main floor carpets and a matching rear bulkhead piece of carpet. Fitting instructions are also included.
On these models, there is a 6 piece sound deadening kit under the moulded footwells.Most MGF's leak water, so before ordering your new carpet, may we suggest that you peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces. We can offer you a new insulation kit if required. (Part no. RP1109) To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section. A Torx no. 50 spanner, a Philips, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1107BLUE
In stock
Most orders placed now ship tomorrow!
£197.50 ex VAT£237.00 inc UK VAT
Quantity
The original Factory moulding tools are gone. However, new moulding tools have been developed and we can now offer you a brand new carpet set in a range of colours never available before. The original carpets did not fit that well, so certain areas have been modified to improve the fit.This kit includes the two main floor carpets and a matching rear bulkhead piece of carpet. Fitting instructions are also included.

On these models, there is a 6 piece sound deadening kit under the moulded footwells. Most MGF's leak water, so before ordering your new carpet, may we suggest that you peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces. We can offer you a new insulation kit if required. (Part no. RP1109) To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section. A Torx no. 50 spanner, a Philips, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.

 
Qty Req-1
Rate and Review this Product
RP1107RED
In stock
Most orders placed now ship tomorrow!
£197.50 ex VAT£237.00 inc UK VAT
Quantity
The moulded carpet set we have for earlier MGF models will fit later TF cars as well. The construction of the TF carpets was upgraded in production and had a foam insulated backing and was a one piece construction whereas the MGF carpets were of a two piece style. After chassis number D4 620549, these later carpets were fitted. Another way of checking if you have the later style, is to peel the carpet away from the sill and if you can see the white foam backing, then you definitely have the late style carpet. Our set contains not only the new carpet pieces, but also an insulation kit that needs to be fitted to the floor pan, which in turn will make the carpet fit perfectly. We give full fitting instructions with each set

INSTRUCTIONS:

To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section.  A Torx no. 50 spanner, a Philips screwdriver, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1110BLACK
In stock
Most orders placed now ship tomorrow!
£255.00 ex VAT£306.00 inc UK VAT
Quantity
The moulded carpet set we have for earlier MGF models will fit later TF cars as well. The construction of the TF carpets was upgraded in production and had a foam insulated backing and was a one piece construction whereas the MGF carpets were of a two piece style. After chassis number D4 620549, these later carpets were fitted. Another way of checking if you have the later style, is to peel the carpet away from the sill and if you can see the white foam backing, then you definitely have the late style carpet. Our set contains not only the new carpet pieces, but also an insulation kit that needs to be fitted to the floor pan, which in turn will make the carpet fit perfectly. We give full fitting instructions with each set

INSTRUCTIONS:

To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section.  A Torx no. 50 spanner, a Philips screwdriver, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1110GREY
In stock
Most orders placed now ship tomorrow!
£255.00 ex VAT£306.00 inc UK VAT
Quantity
The moulded carpet set we have for earlier MGF models will fit later TF cars as well. The construction of the TF carpets was upgraded in production and had a foam insulated backing and was a one piece construction whereas the MGF carpets were of a two piece style. After chassis number D4 620549, these later carpets were fitted. Another way of checking if you have the later style, is to peel the carpet away from the sill and if you can see the white foam backing, then you definitely have the late style carpet. Our set contains not only the new carpet pieces, but also an insulation kit that needs to be fitted to the floor pan, which in turn will make the carpet fit perfectly. We give full fitting instructions with each set

INSTRUCTIONS:

To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section.  A Torx no. 50 spanner, a Philips screwdriver, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1110BISCUIT
In stock
Most orders placed now ship tomorrow!
£255.00 ex VAT£306.00 inc UK VAT
Quantity
The moulded carpet set we have for earlier MGF models will fit later TF cars as well. The construction of the TF carpets was upgraded in production and had a foam insulated backing and was a one piece construction whereas the MGF carpets were of a two piece style. After chassis number D4 620549, these later carpets were fitted. Another way of checking if you have the later style, is to peel the carpet away from the sill and if you can see the white foam backing, then you definitely have the late style carpet. Our set contains not only the new carpet pieces, but also an insulation kit that needs to be fitted to the floor pan, which in turn will make the carpet fit perfectly. We give full fitting instructions with each set

INSTRUCTIONS:

To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section.  A Torx no. 50 spanner, a Philips screwdriver, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1110BRG
In stock
Most orders placed now ship tomorrow!
£255.00 ex VAT£306.00 inc UK VAT
Quantity
The moulded carpet set we have for earlier MGF models will fit later TF cars as well. The construction of the TF carpets was upgraded in production and had a foam insulated backing and was a one piece construction whereas the MGF carpets were of a two piece style. After chassis number D4 620549, these later carpets were fitted. Another way of checking if you have the later style, is to peel the carpet away from the sill and if you can see the white foam backing, then you definitely have the late style carpet. Our set contains not only the new carpet pieces, but also an insulation kit that needs to be fitted to the floor pan, which in turn will make the carpet fit perfectly. We give full fitting instructions with each set

INSTRUCTIONS:

To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section.  A Torx no. 50 spanner, a Philips screwdriver, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1110BLUE
In stock
Most orders placed now ship tomorrow!
£255.00 ex VAT£306.00 inc UK VAT
Quantity
The moulded carpet set we have for earlier MGF models will fit later TF cars as well. The construction of the TF carpets was upgraded in production and had a foam insulated backing and was a one piece construction whereas the MGF carpets were of a two piece style. After chassis number D4 620549, these later carpets were fitted. Another way of checking if you have the later style, is to peel the carpet away from the sill and if you can see the white foam backing, then you definitely have the late style carpet. Our set contains not only the new carpet pieces, but also an insulation kit that needs to be fitted to the floor pan, which in turn will make the carpet fit perfectly. We give full fitting instructions with each set

INSTRUCTIONS:

To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section.  A Torx no. 50 spanner, a Philips screwdriver, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1110RED
In stock
Most orders placed now ship tomorrow!
£255.00 ex VAT£306.00 inc UK VAT
Quantity
The original Factory moulding tools are gone. However, new moulding tools have been developed and we can now offer you a brand new carpet set in a range of colours never available before. The original carpets did not fit that well, so certain areas have been modified to improve the fit.This kit includes the two main floor carpets and a matching rear bulkhead piece of carpet. Fitting instructions are also included.

On these models, there is a 6 piece sound deadening kit under the moulded footwells. Most MGF's leak water, so before ordering your new carpet, may we suggest that you peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces. We can offer you a new insulation kit if required. (Part no. RP1109) To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section. A Torx no. 50 spanner, a Philips, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
RP1108BLACK
In stock
Most orders placed now ship tomorrow!
£205.00 ex VAT£246.00 inc UK VAT
Quantity
The original Factory moulding tools are gone. However, new moulding tools have been developed and we can now offer you a brand new carpet set in a range of colours never available before. The original carpets did not fit that well, so certain areas have been modified to improve the fit.This kit includes the two main floor carpets and a matching rear bulkhead piece of carpet. Fitting instructions are also included.

On these models, there is a 6 piece sound deadening kit under the moulded footwells. Most MGF's leak water, so before ordering your new carpet, may we suggest that you peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces. We can offer you a new insulation kit if required. (Part no. RP1109) To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section. A Torx no. 50 spanner, a Philips, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1108GREY
In stock
Most orders placed now ship tomorrow!
£197.50 ex VAT£237.00 inc UK VAT
Quantity
The original Factory moulding tools are gone. However, new moulding tools have been developed and we can now offer you a brand new carpet set in a range of colours never available before. The original carpets did not fit that well, so certain areas have been modified to improve the fit.This kit includes the two main floor carpets and a matching rear bulkhead piece of carpet. Fitting instructions are also included.

On these models, there is a 6 piece sound deadening kit under the moulded footwells. Most MGF's leak water, so before ordering your new carpet, may we suggest that you peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces. We can offer you a new insulation kit if required. (Part no. RP1109) To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section. A Torx no. 50 spanner, a Philips, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1108BISCUIT
In stock
Most orders placed now ship tomorrow!
£197.50 ex VAT£237.00 inc UK VAT
Quantity
The original Factory moulding tools are gone. However, new moulding tools have been developed and we can now offer you a brand new carpet set in a range of colours never available before. The original carpets did not fit that well, so certain areas have been modified to improve the fit.This kit includes the two main floor carpets and a matching rear bulkhead piece of carpet. Fitting instructions are also included.

On these models, there is a 6 piece sound deadening kit under the moulded footwells. Most MGF's leak water, so before ordering your new carpet, may we suggest that you peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces. We can offer you a new insulation kit if required. (Part no. RP1109) To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section. A Torx no. 50 spanner, a Philips, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1108BRG
In stock
Most orders placed now ship tomorrow!
£197.50 ex VAT£237.00 inc UK VAT
Quantity
The original Factory moulding tools are gone. However, new moulding tools have been developed and we can now offer you a brand new carpet set in a range of colours never available before. The original carpets did not fit that well, so certain areas have been modified to improve the fit.This kit includes the two main floor carpets and a matching rear bulkhead piece of carpet. Fitting instructions are also included.
On these models, there is a 6 piece sound deadening kit under the moulded footwells.Most MGF's leak water, so before ordering your new carpet, may we suggest that you peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces. We can offer you a new insulation kit if required. (Part no. RP1109) To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section. A Torx no. 50 spanner, a Philips, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1108BLUE
In stock
Most orders placed now ship tomorrow!
£197.50 ex VAT£237.00 inc UK VAT
Quantity
The original Factory moulding tools are gone. However, new moulding tools have been developed and we can now offer you a brand new carpet set in a range of colours never available before. The original carpets did not fit that well, so certain areas have been modified to improve the fit.This kit includes the two main floor carpets and a matching rear bulkhead piece of carpet. Fitting instructions are also included.
On these models, there is a 6 piece sound deadening kit under the moulded footwells.Most MGF's leak water, so before ordering your new carpet, may we suggest that you peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces. We can offer you a new insulation kit if required. (Part no. RP1109) To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section. A Torx no. 50 spanner, a Philips, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1108RED
In stock
Most orders placed now ship tomorrow!
£197.50 ex VAT£237.00 inc UK VAT
Quantity
The moulded carpet set we have for earlier MGF models will fit later TF cars as well. The construction of the TF carpets was upgraded in production and had a foam insulated backing and was a one piece construction whereas the MGF carpets were of a two piece style. After chassis number D4 620549, these later carpets were fitted. Another way of checking if you have the later style, is to peel the carpet away from the sill and if you can see the white foam backing, then you definitely have the late style carpet. Our set contains not only the new carpet pieces, but also an insulation kit that needs to be fitted to the floor pan, which in turn will make the carpet fit perfectly. We give full fitting instructions with each set

INSTRUCTIONS:

To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section.  A Torx no. 50 spanner, a Philips screwdriver, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1111BLACK
In stock
Most orders placed now ship tomorrow!
£255.00 ex VAT£306.00 inc UK VAT
Quantity
The moulded carpet set we have for earlier MGF models will fit later TF cars as well. The construction of the TF carpets was upgraded in production and had a foam insulated backing and was a one piece construction whereas the MGF carpets were of a two piece style. After chassis number D4 620549, these later carpets were fitted. Another way of checking if you have the later style, is to peel the carpet away from the sill and if you can see the white foam backing, then you definitely have the late style carpet. Our set contains not only the new carpet pieces, but also an insulation kit that needs to be fitted to the floor pan, which in turn will make the carpet fit perfectly. We give full fitting instructions with each set

INSTRUCTIONS:

To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section.  A Torx no. 50 spanner, a Philips screwdriver, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1111GREY
In stock
Most orders placed now ship tomorrow!
£255.00 ex VAT£306.00 inc UK VAT
Quantity
The moulded carpet set we have for earlier MGF models will fit later TF cars as well. The construction of the TF carpets was upgraded in production and had a foam insulated backing and was a one piece construction whereas the MGF carpets were of a two piece style. After chassis number D4 620549, these later carpets were fitted. Another way of checking if you have the later style, is to peel the carpet away from the sill and if you can see the white foam backing, then you definitely have the late style carpet. Our set contains not only the new carpet pieces, but also an insulation kit that needs to be fitted to the floor pan, which in turn will make the carpet fit perfectly. We give full fitting instructions with each set

INSTRUCTIONS:

To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section.  A Torx no. 50 spanner, a Philips screwdriver, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1111BISCUIT
In stock
Most orders placed now ship tomorrow!
£255.00 ex VAT£306.00 inc UK VAT
Quantity
The moulded carpet set we have for earlier MGF models will fit later TF cars as well. The construction of the TF carpets was upgraded in production and had a foam insulated backing and was a one piece construction whereas the MGF carpets were of a two piece style. After chassis number D4 620549, these later carpets were fitted. Another way of checking if you have the later style, is to peel the carpet away from the sill and if you can see the white foam backing, then you definitely have the late style carpet. Our set contains not only the new carpet pieces, but also an insulation kit that needs to be fitted to the floor pan, which in turn will make the carpet fit perfectly. We give full fitting instructions with each set

INSTRUCTIONS:

To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section.  A Torx no. 50 spanner, a Philips screwdriver, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1111BRG
In stock
Most orders placed now ship tomorrow!
£255.00 ex VAT£306.00 inc UK VAT
Quantity
The moulded carpet set we have for earlier MGF models will fit later TF cars as well. The construction of the TF carpets was upgraded in production and had a foam insulated backing and was a one piece construction whereas the MGF carpets were of a two piece style. After chassis number D4 620549, these later carpets were fitted. Another way of checking if you have the later style, is to peel the carpet away from the sill and if you can see the white foam backing, then you definitely have the late style carpet. Our set contains not only the new carpet pieces, but also an insulation kit that needs to be fitted to the floor pan, which in turn will make the carpet fit perfectly. We give full fitting instructions with each set

INSTRUCTIONS:

To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section.  A Torx no. 50 spanner, a Philips screwdriver, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1111BLUE
In stock
Most orders placed now ship tomorrow!
£255.00 ex VAT£306.00 inc UK VAT
Quantity
The moulded carpet set we have for earlier MGF models will fit later TF cars as well. The construction of the TF carpets was upgraded in production and had a foam insulated backing and was a one piece construction whereas the MGF carpets were of a two piece style. After chassis number D4 620549, these later carpets were fitted. Another way of checking if you have the later style, is to peel the carpet away from the sill and if you can see the white foam backing, then you definitely have the late style carpet. Our set contains not only the new carpet pieces, but also an insulation kit that needs to be fitted to the floor pan, which in turn will make the carpet fit perfectly. We give full fitting instructions with each set

INSTRUCTIONS:

To fit these carpets, you will need to remove the seats, the rear "T" bar and cubby boxes. It is not necessary to remove any of the centre console section.  A Torx no. 50 spanner, a Philips screwdriver, a flat screwdriver and some contact adhesive are the only items you require to fit this set. We estimate a fitting time of no longer than 3 hours to complete the job.
Qty Req-1
Rate and Review this Product
RP1111RED
In stock
Most orders placed now ship tomorrow!
£255.00 ex VAT£306.00 inc UK VAT
Quantity
Rate and Review this Product
EAD000010PMA
In stock
Most orders placed now ship tomorrow!
£65.00 ex VAT£78.00 inc UK VAT
Quantity
On these models, there is a 6 piece sound deadening kit under the moulded footwells.
Most MGF's leak water, so before ordering your new carpet, may we suggest that you peel your original carpet away from the bodywork in front and behind the seats to inspect for water damage to these insulation pieces.
Qty Req-1
Rate and Review this Product
RP1109
In stock
Most orders placed now ship tomorrow!
£69.95 ex VAT£83.94 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
FS106205L
In stock
Most orders placed now ship tomorrow!
£1.23 ex VAT£1.48 inc UK VAT
Quantity
Rate and Review this Product
DRC5582
In stock
Most orders placed now ship tomorrow!
£0.47 ex VAT£0.56 inc UK VAT
Quantity
Fills hole used for mounting Japan market warning flare bracket in original fitment carpets.
Qty Req-1, Model-Not Japan, Item Info 2-hole blanking
Rate and Review this Product
AFU3711L
In stock
Most orders placed now ship tomorrow!
£2.70 ex VAT£3.24 inc UK VAT
Quantity

Related Items

Carpet/Trim Adhesive 1 Litre Can - RX1353
Carpet/Trim Adhesive 1 Litre Can - RX1353
Only Available for Delivery by UPS to Mainland United Kingdom Destinations
£20.25 ex VAT£24.30 inc UK VAT
Spray Adhesive 500ml - RX1353A
Spray Adhesive 500ml - RX1353A
Only Available for Delivery by UPS to Mainland United Kingdom Destinations
£8.15 ex VAT£9.78 inc UK VAT
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Really impressed with online chat - located part I needed in minutes thanks!!!" Customer Comment
Product Description

MGF and MG TF Interior Carpet and Fittings
We say ‘aftermarket fitment’ to distinguish these carpets from the original fitment (which are now no longer available), but in many ways they’re superior to the originals.
New moulding tools have been commissioned and as a result the opportunity has been taken to greatly improve the fit and durability. It also means that carpets are now available in a wide selection of colours, complementing the interior trim items now available, as well as original style black.
Each kit includes a pair of full-length moulded floor carpets plus the rear bulkhead carpet. Because they’re moulded exactly to shape, no gluing or trimming is required and fitment takes approximately three hours (removal of the seats is required during the process).
Also included in the MG TF kits are floor insulation pads, replicating the original late model MG TF thick white foam-backed carpet specification and guaranteeing comfort and improved noise suppression.

Review: John R Submitted: 27/04/2021

Overall5 out of 5 stars.
verified

Subject
They look really nice

Did this item work well with your project? What vehicle type are you using this for?
Compared to the original interior carpet in my MGF this set fits really well.

Review: Paul Barker Submitted: 15/04/2021

Overall5 out of 5 stars.
verified

Subject
Quality appears very good.

Did this item work well with your project? What vehicle type are you using this for?
MGF. haven't fitted it yet.

Review: Bill Submitted: 08/03/2021

Overall4 out of 5 stars.
verified

Subject
Fitted well

Did this item work well with your project? What vehicle type are you using this for?
Underlay fitted well just a few adjustments, delivery was excellent

Review: Draiggoch Submitted: 19/03/2020

Overall5 out of 5 stars.
verified

Subject
Good Quality

Did this item work well with your project? What vehicle type are you using this for?
New carpet set and insulation for my MGF, good fit and straightforward for any DIY mechanic minimal tools required.