Triumph 2000/2500/2.5Pi Short Engine Rebuild Kits

Order your Triumph 2000/2500/2.5Pi Short Engine Rebuild Kits ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID008626

Prices displayed in:
Suitable for Mk3 engines with flat top pistons & non recessed type cylinder bores.

This kit contains everything you need to recondition your short engine. We assume you will have the block re-bored and any other machining done as required.

IMPORTANT-Pistons are supplied +0.20” oversize. Bearing sets are supplied in standard size. Please advise specific sizes required at time of ordering.

Kit Contains:
Flat top piston set +0.020" oversize (Inc rings/pins) State size required
Main & big end bearing shells (State size required)
Thrust washers (State size required)
Tappets
Timing chain
Timing chain tensioner
Oil pump
Oil pressure relief valve
Oil pressure relief valve spring
Oil pressure switch
Head gasket set (non recessed bore type head gasket)
Sump gasket set (Inc oil seals)
Oil filter

Why not add some of all of the following options to the rebuild kit:
Crankshaft
Camshaft
Crankshaft sprocket
Camshaft sprocket
Con rods or small end bearings
In addition to the rebuild kits, the engine section lists all other parts that you might want to buy additionally, such as engine studs, cylinder head nuts, water pump etc.
£520.00 ex VAT£624.00 inc UK VAT
Quantity
Suitable for Mk3 engines with dome top pistons & recessed type cylinder bores.

This kit contains everything you need to recondition your short engine. We assume you will have the block re-bored and any other machining done as required.

IMPORTANT-Pistons are supplied +0.20” oversize. Bearing sets are supplied in standard size. Please advise specific sizes required at time of ordering.

Kit Contains:
Dome top piston set +0.020" oversize (Inc rings/pins) State size required
Main & big end bearing shells (State size required)
Thrust washers (State size required)
Tappets
Timing chain
Timing chain tensioner
Oil pump
Oil pressure relief valve
Oil pressure relief valve spring
Oil pressure switch
Head gasket set (recessed bore type head gasket)
Sump gasket set (Inc oil seals)
Oil filter

Why not add some of all of the following options to the rebuild kit:
Crankshaft
Camshaft
Crankshaft sprocket
Camshaft sprocket
Con rods or small end bearings
In addition to the rebuild kits, the engine section lists all other parts that you might want to buy additionally, such as engine studs, cylinder head nuts, water pump etc.
£500.00 ex VAT£600.00 inc UK VAT
Quantity
Suitable for Mk3 engines with dome top pistons & recessed type cylinder bores.

This kit contains everything you need to recondition your short engine. We assume you will have the block re-bored and any other machining done as required.

IMPORTANT-Pistons are supplied +0.20” oversize. Bearing sets are supplied in standard size. Please advise specific sizes required at time of ordering.

Kit Contains:
Dome top piston set +0.020" oversize (Inc rings/pins) State size required
Main & big end bearing shells (State size required)
Thrust washers (State size required)
Tappets
Timing chain
Timing chain tensioner
Oil pump
Oil pressure relief valve
Oil pressure relief valve spring
Oil pressure switch
Head gasket set (recessed bore type head gasket)
Sump gasket set (Inc oil seals)
Oil filter

Why not add some of all of the following options to the rebuild kit:
Crankshaft
Camshaft
Crankshaft sprocket
Camshaft sprocket
Con rods or small end bearings
In addition to the rebuild kits, the engine section lists all other parts that you might want to buy additionally, such as engine studs, cylinder head nuts, water pump etc.
£500.00 ex VAT£600.00 inc UK VAT
Quantity
This kit contains everything you need to recondition your short engine. We assume you will have all machining done as required.
IMPORTANT - Piston sets are supplied in +20 oversize, bearing sets and thrust washer sets are supplied in standard size.
Please advise specific sizes required at time of ordering.

Kit contains:
Set of 6 pistons (state size required)
Main & big end bearing shells (state size required)
Thrust washers (state size required)
Water pump gasket
Water pump housing gasket
Cylinder head gasket (non-recessed)
Rocker cover gasket
Manifold gasket
Exhaust downpipe gasket
Thermostat gasket
Crankshaft rear oil seal
Sump gasket set (excl. oil seals)
Timing cover oil seal
Oil pressure relief valve sealing washer
Oil pressure relief valve spring
Oil pressure relief valve
Oil pressure switch
Cam follower set (large diameter)
Timing chain
Timing chain tensioner
Oil pump
Oil filter

Additionally why not add some or all of the following options to the rebuild kit:
Crankshaft
Camshaft
Crankshaft sprocket
Camshaft sprocket
Con rods

In addition to the rebuild kits, the engine section of this catalogue lists all the other parts that you might want to buy, such as engine studs, cylinder head nuts, water pump etc.
In stock
Most express orders ship today!
£410.00 ex VAT£492.00 inc UK VAT
Quantity
This kit contains everything you need to recondition your short engine. We assume you will have all machining done as required.
IMPORTANT - Piston sets are supplied in +20 oversize, bearing sets and thrust washer sets are supplied in standard size.
Please advise specific sizes required at time of ordering.

Kit contains:
Set of 6 pistons (state size required)
Main & big end bearing shells (state size required)
Thrust washers (state size required)
Water pump gasket
Water pump housing gasket
Cylinder head gasket (non-recessed)
Rocker cover gasket
Manifold gasket
Exhaust downpipe gasket
Thermostat gasket
Crankshaft rear oil seal
Sump gasket set (excl. oil seals)
Timing cover oil seal
Oil pressure relief valve sealing washer
Oil pressure relief valve spring
Oil pressure relief valve
Oil pressure switch
Cam follower set (large diameter)
Timing chain
Timing chain tensioner
Oil pump
Oil filter

Additionally why not add some or all of the following options to the rebuild kit:
Crankshaft
Camshaft
Crankshaft sprocket
Camshaft sprocket
Con rods

In addition to the rebuild kits, the engine section of this catalogue lists all the other parts that you might want to buy, such as engine studs, cylinder head nuts, water pump etc.
In stock
Most express orders ship today!
£410.00 ex VAT£492.00 inc UK VAT
Quantity
This kit contains everything you need to recondition your short engine. We assume you will have all machining done as required.
IMPORTANT - Piston sets are supplied in +20 oversize, bearing sets and thrust washer sets are supplied in standard size.
Please advise specific sizes required at time of ordering.

Kit contains:
Set of 6 pistons (state size required)
Main & big end bearing shells (state size required)
Thrust washers (state size required)
Water pump gasket
Water pump housing gasket
Cylinder head gasket (non-recessed)
Rocker cover gasket
Manifold gasket
Exhaust downpipe gasket
Thermostat gasket
Crankshaft rear oil seal
Sump gasket set (excl. oil seals)
Timing cover oil seal
Oil pressure relief valve sealing washer
Oil pressure relief valve spring
Oil pressure relief valve
Oil pressure switch
Cam follower set (large diameter)
Timing chain
Timing chain tensioner
Oil pump
Oil filter

Additionally why not add some or all of the following options to the rebuild kit:
Crankshaft
Camshaft
Crankshaft sprocket
Camshaft sprocket
Con rods

In addition to the rebuild kits, the engine section of this catalogue lists all the other parts that you might want to buy, such as engine studs, cylinder head nuts, water pump etc.
In stock
Most express orders ship today!
£410.00 ex VAT£492.00 inc UK VAT
Quantity

Related Items

Customer Comments
"Great selection and stock of parts, with fast shipping and good customer service." Customer Comment
Product Description

Triumph 2000/2500/2.5Pi Short Engine Rebuild Kits