Triumph TR6 Hood Stowage Covers
When your hood and frame assembly is folded down the best method to cover and stow it neatly is with a hood stowage cover. It is attached by the snaps on the rear of the hood and the side of the body.
The hood stowage cover was, when originally supplied, coloured to match the interior of the car.
There were essentially three designs of hood stowage cover; one to be used when only the soft top was fitted, one designed to contain the folded soft top assembly inside the car when a hard top assembly was used, and one introduced at CR5001, a dual purpose item (easily identified by the additional reversible flap on its top surface) which allowed the stowage cover to be used in both hard top and soft top circumstances.
This third cover fits in the normal way, or, with the additional flap turned inside out to form a pocket, wraps around the soft top assembly.
The use of the stowage cover while the hard top is fitted alleviates the need to remove the hood and frame assembly from your car and store it under the bed! The stowage covers listed below are suitable for all applications. As an alternative to the PVC material, we also offer double duck (canvas) and mohair - perhaps to match a hood cover of the same material.
Please enquire for special colour hood stowage covers available to (pre-paid) orders.