Rover 400/45/MG ZS Service Parts

Rover 400/45/MG ZS Service Parts. Order today from RimmerBros.com. Low Prices and Fast delivery ✈ worldwide! Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID012559

Prices displayed in: GB Pound Euro US Dollar AUD NZD
Includes 4 x Spark Plugs, 1 x Air Filter, 1 x Oil filter and a Sump Plug Washer.
£33.99 ex VAT£40.79 inc UK VAT
Quantity
Contents:
Air cleaner element
Oil filter element
Sump plug washer
Fuel filter
£27.99 ex VAT£33.59 inc UK VAT
Quantity
£12.00 ex VAT£14.40 inc UK VAT
Quantity
Contents:
Air cleaner element
Oil filter element
Sump plug washer
Spark plugs x 6
£49.95 ex VAT£59.94 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£16.41 ex VAT£19.69 inc UK VAT
Quantity
K&N 57i Series Induction Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 150,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life.

Product Specifications:
  • Product Style: 57i Series International Kits
  • Type: Gen I
  • CARB Exempt: No
  • Base Outside Diameter: 5.433 in (138 mm)
  • Flange Inside Diameter: 4 in (102 mm)
  • Flange Length: 0.709 in (18 mm)
  • Height: 5.906 in (150 mm)
  • Top Outside Diameter: 4.528 in (115 mm)
  • Top Style: Carbon Fiber
  • Weight: 3.4 lb (1.5 kg)
Vehicle Applications:

2005 ROVER 25 1.4L L4 F/I - All
2005 MG ZS120 1.8L L4 F/I - All
2005 MG ZR160 1.8L L4 F/I - All
2005 MG ZR120 1.8L L4 F/I - All
2005 MG ZR105 1.4L L4 F/I - All
2004 ROVER 25 1.4L L4 F/I - All
2004 MG ZS120 1.8L L4 F/I - All
2004 MG ZR160 1.8L L4 F/I - All
2004 MG ZR120 1.8L L4 F/I - All
2004 MG ZR105 1.4L L4 F/I - All
2003 ROVER 25 1.4L L4 F/I - All
2003 MG ZS120 1.8L L4 F/I - All
2003 MG ZR160 1.8L L4 F/I - All
2003 MG ZR120 1.8L L4 F/I - All
2003 MG ZR105 1.4L L4 F/I - All
2003 MG ZR 1.8L L4 F/I - 120BHP, 16v
2002 ROVER 25 1.4L L4 F/I - All
2002 MG ZS120 1.8L L4 F/I - All
2002 MG ZR160 1.8L L4 F/I - All
2002 MG ZR120 1.8L L4 F/I - All
2002 MG ZR105 1.4L L4 F/I - All
2002 MG ZR 1.8L L4 F/I - 120BHP, 16v
2001 ROVER 25 1.4L L4 F/I - All
2001 MG ZS120 1.8L L4 F/I - All
2001 MG ZR160 1.8L L4 F/I - All
2001 MG ZR120 1.8L L4 F/I - All
2001 MG ZR105 1.4L L4 F/I - All
2001 MG ZR 1.8L L4 F/I - 120BHP, 16v
2000 ROVER 25 1.4L L4 F/I - All
1999 ROVER 25 1.4L L4 F/I - All

K&N manufactures performance air filters and air intakes for automotive & motorcycle applications around the globe.
£158.00 ex VAT£189.60 inc UK VAT
Quantity
K&N 57i Generation II Induction Kits are built primarily for European vehicles. They come with K&N's Million Mile Limited Warranty. These intake kits use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter alone. The weakest link in the airflow "chain" robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the engine. K&N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER.

Product Specifications:
  • Product Style: 57i Series International Kits
  • Type: Gen II
  • CARB Exempt: No
  • Base Outside Diameter: 5.433 in (138 mm)
  • Flange Inside Diameter: 4 in (102 mm)
  • Flange Length: 0.709 in (18 mm)
  • Height: 5.906 in (150 mm)
  • Top Outside Diameter: 4.528 in (115 mm)
  • Top Style: Carbon Fiber
  • Weight: 5.9 lb (2.7 kg)
  • Product Box Length: 20 in (508 mm)
  • Product Box Width: 10 in (254 mm)
  • Product Box Height: 10 in (254 mm)
Vehicle Applications:

2002 MG ZS180 2.5L V6 F/I - All
2001 MG ZS180 2.5L V6 F/I - All

K&N manufactures performance air filters and air intakes for automotive & motorcycle applications around the globe.
Usually in stock at our supplier, allow 1 week for delivery
£185.00 ex VAT£222.00 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£29.14 ex VAT£34.97 inc UK VAT
Quantity
Suitable for the following filters:
CDU1268
LPW100180L
LPW100181
LPW100230
STC974

Body size - 3.00" (76mm)
Thread/insert size - 13/16" x 16

Britpart Filter Guard removes potential engine damaging metal particles from your oil.

Clean oil works better than dirty oil with reduced friction and less wear. Britpart's Filter Guard is an inexpensive way of removing the harmful contaminants that conventional oil filters can miss. The contaminants are fine metal particles which act like an abrasive on the fast moving parts in your vehicle's engine - dramatically shortening engine life.

Filter Guard works by magnetic filtration technology resulting in cleaner oil which your engine will thank you for by running better now and in years to come. The Filter Guard will never clog or restrict the all important oil flow.
  • Improves fuel economy
  • Extends engine life
  • No vehicle modification needed
  • Added protection for stop & go driving and towing
  • Cleans engine oil for 50,000 miles/80,000kms
  • Does not effect vehicle warranties
Added protection for your engine!

Important - Please check that there is sufficient room in your engine bay for the additional height of the filter guard.
£43.50 ex VAT£52.20 inc UK VAT
Quantity
£4.95 ex VAT£5.94 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£19.99 ex VAT£23.99 inc UK VAT
Quantity
£18.16 ex VAT£21.79 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£6.99 ex VAT£8.39 inc UK VAT
Quantity
£10.00 ex VAT£12.00 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£38.91 ex VAT£46.69 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£40.18 ex VAT£48.22 inc UK VAT
Quantity
1.8 without auto tensioning.
Each kit includes timing belt and tensioner assembly.
£47.50 ex VAT£57.00 inc UK VAT
Quantity
Kit Contents:-

Timing Belt 23mm wide - CDU2749P x 1
Timing Belt Tensioner - LHP10015P x 1
1.6, 1.8 with auto tensioning.
Each kit includes timing belt and tensioner assembly.
£55.00 ex VAT£66.00 inc UK VAT
Quantity
1.6, 1.8 with auto tensioning.
Each kit includes timing belt and tensioner assembly.
£23.50 ex VAT£28.20 inc UK VAT
Quantity
Out of stock, expected soon Sep 24, 2018. Add to cart and Back Order
£32.50 ex VAT£39.00 inc UK VAT
Quantity
Kit Contents:
Front Timing Belt - LHN100410 x 1
Rear Timing Belts - LHN100420 x 2
Tensioner Pulley - LHB101630 x 1
Idler Pulley - LHV100110 x 1
Contains front & rear timing belts, idler and tensioner pulleys and water pump.
£154.69 ex VAT£185.63 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£30.76 ex VAT£36.91 inc UK VAT
Quantity
£7.50 ex VAT£9.00 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£7.72 ex VAT£9.26 inc UK VAT
Quantity
Out of stock, expected soon. Add to cart and Back Order
£17.54 ex VAT£21.05 inc UK VAT
Quantity

Related Items

Nitrile Disposable Gloves - 100 - RX1406
Nitrile Disposable Gloves - 100 - RX1406
£6.50 ex VAT£7.80 inc UK VAT
Oil/Fluid Drain Pan 8 Litres - CONS4144 - Aftermarket
Oil/Fluid Drain Pan 8 Litres - CONS4144 - Aftermarket
£10.78 ex VAT£12.94 inc UK VAT
Oil Drip Tray Galvanised (63cm x 120cm x 1cm - GAC9905X
Oil Drip Tray Galvanised (63cm x 120cm x 1cm - GAC9905X
£26.75 ex VAT£32.10 inc UK VAT
Customer Comments
"Great selection of genuine and aftermarket Land Rover spares" Customer Comment
Product Description

Rover 400/45/MG ZS Service Parts