Triumph 2000/2500/2.5Pi Full Engine Rebuild Kits

Order your Triumph 2000/2500/2.5Pi Full Engine Rebuild Kits ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID008625

Prices displayed in:
This kit contains everything you need to recondition your full engine. We assume you will have the block re-bored and any other machining done as required.

IMPORTANT-Pistons are supplied +0.20” oversize. Bearing sets are supplied in standard size. Please advise specific sizes required at time of ordering.

Kit Contains:
Flat top piston set +0.020" oversize (Inc rings/pins) State size required
Main & big end bearing shells (State size required)
Thrust washers (State size required)
Inlet Valves
Exhaust valves
Valve springs
Valve guides
Valve stem oil seals
Tappets
Timing chain
Timing chain tensioner
Crankshaft sprocket
Oil pump
Oil pressure relief valve
Oil pressure relief valve spring
Oil pressure switch
Head gasket set
Sump gasket set (Inc oil seals)
Oil filter

Why not add some of all of the following options to the rebuild kit:
Crankshaft
Camshaft
Rocker shaft
Rocker arm
Camshaft sprocket
Con rods or small end bearings
In addition to the rebuild kits, the engine section lists all other parts that you might want to buy additionally, such as engine studs, cylinder head nuts, water pump etc.
Model-2000 Mk2
Rate and Review this Product
RG1020R1BKSALOON
In stock
£640.00 ex VAT£768.00 inc UK VAT
Quantity
Suitable for engines with dome top pistons & recessed type cylinder bores.

This kit contains everything you need to recondition your full engine. We assume you will have the block re-bored and any other machining done as required.

IMPORTANT-Pistons are supplied +0.20” oversize. Bearing sets are supplied in standard size. Please advise specific sizes required at time of ordering.

Kit Contains:
Dome top piston set +0.020" oversize (Inc rings/pins) State size required
Main & big end bearing shells (State size required)
Thrust washers (State size required)
Inlet Valves
Exhaust valves
Valve springs
Valve guides
Valve stem oil seals
Tappets
Timing chain
Timing chain tensioner
Crankshaft sprocket
Oil pump
Oil pressure relief valve
Oil pressure relief valve spring
Oil pressure switch
Head gasket set (recessed type bore head gasket)
Sump gasket set (Inc oil seals)
Oil filter

Why not add some of all of the following options to the rebuild kit:
Crankshaft
Camshaft
Rocker shaft
Rocker arm
Camshaft sprocket
Con rods or small end bearings
In addition to the rebuild kits, the engine section lists all other parts that you might want to buy additionally, such as engine studs, cylinder head nuts, water pump etc.
Model-2000 Mk2
Rate and Review this Product
RG1020R2BKSALOON
In stock
£620.00 ex VAT£744.00 inc UK VAT
Quantity
Suitable for engines with dome top pistons & recessed type cylinder bores.

This kit contains everything you need to recondition your full engine. We assume you will have the block re-bored and any other machining done as required.

IMPORTANT-Pistons are supplied +0.20” oversize. Bearing sets are supplied in standard size. Please advise specific sizes required at time of ordering.

Kit Contains:
Dome top piston set +0.020" oversize (Inc rings/pins) State size required
Main & big end bearing shells (State size required)
Thrust washers (State size required)
Inlet Valves
Exhaust valves
Valve springs
Valve guides
Valve stem oil seals
Tappets
Timing chain
Timing chain tensioner
Crankshaft sprocket
Oil pump
Oil pressure relief valve
Oil pressure relief valve spring
Oil pressure switch
Head gasket set (recessed type bore head gasket)
Sump gasket set (Inc oil seals)
Oil filter

Why not add some of all of the following options to the rebuild kit:
Crankshaft
Camshaft
Rocker shaft
Rocker arm
Camshaft sprocket
Con rods or small end bearings
In addition to the rebuild kits, the engine section lists all other parts that you might want to buy additionally, such as engine studs, cylinder head nuts, water pump etc.
Model-2000 Mk2
Rate and Review this Product
RG1020R3BKSALOON
In stock
£620.00 ex VAT£744.00 inc UK VAT
Quantity
This kit contains everything you need to recondition your full engine. We assume you will have the block re-bored and any other machining done as required.

IMPORTANT-Pistons are supplied +0.20” oversize. Bearing sets are supplied in standard size. Please advise specific sizes required at time of ordering.

Kit Contains:
Flat top piston set +0.020" oversize (Inc rings/pins) State size required
Main & big end bearing shells (State size required)
Thrust washers (State size required)
Inlet Valves
Exhaust valves
Valve springs
Valve guides
Valve stem oil seals
Tappets
Timing chain
Timing chain tensioner
Crankshaft sprocket
Oil pump
Oil pressure relief valve
Oil pressure relief valve spring
Oil pressure switch
Head gasket set
Sump gasket set (Inc oil seals)
Oil filter

Why not add some of all of the following options to the rebuild kit:
Crankshaft
Camshaft
Rocker shaft
Rocker arm
Camshaft sprocket
Con rods or small end bearings
In addition to the rebuild kits, the engine section lists all other parts that you might want to buy additionally, such as engine studs, cylinder head nuts, water pump etc.
Model-2.5Pi Mk2
Rate and Review this Product
RM8046R1BK
Out of stock, expected soon May 01, 2024. Add to cart and Back Order
£640.00 ex VAT£768.00 inc UK VAT
Quantity
This kit contains everything you need to recondition your full engine. We assume you will have the block re-bored and any other machining done as required.

IMPORTANT-Pistons are supplied +0.20” oversize. Bearing sets are supplied in standard size. Please advise specific sizes required at time of ordering.

Kit Contains:
Flat top piston set +0.020" oversize (Inc rings/pins) State size required
Main & big end bearing shells (State size required)
Thrust washers (State size required)
Inlet Valves
Exhaust valves
Valve springs
Valve guides
Valve stem oil seals
Tappets
Timing chain
Timing chain tensioner
Crankshaft sprocket
Oil pump
Oil pressure relief valve
Oil pressure relief valve spring
Oil pressure switch
Head gasket set (recessed type cylinder bore head gasket)
Sump gasket set (Inc oil seals)
Oil filter

Why not add some of all of the following options to the rebuild kit:
Crankshaft
Camshaft
Rocker shaft
Rocker arm
Camshaft sprocket
Con rods or small end bearings
In addition to the rebuild kits, the engine section lists all other parts that you might want to buy additionally, such as engine studs, cylinder head nuts, water pump etc.
Model-2.5Pi Mk2
Rate and Review this Product
RM8046R2BK
Out of stock, expected soon May 01, 2024. Add to cart and Back Order
£670.00 ex VAT£804.00 inc UK VAT
Quantity
This kit contains everything you need to recondition your full engine. We assume you will have the block re-bored and any other machining done as required.

IMPORTANT-Pistons are supplied +0.20” oversize. Bearing sets are supplied in standard size. Please advise specific sizes required at time of ordering.

Kit Contains:
Flat top piston set +0.020" oversize (Inc rings/pins) State size required
Main & big end bearing shells (State size required)
Thrust washers (State size required)
Inlet Valves
Exhaust valves
Valve springs
Valve guides
Valve stem oil seals
Tappets
Timing chain
Timing chain tensioner
Crankshaft sprocket
Oil pump
Oil pressure relief valve
Oil pressure relief valve spring
Oil pressure switch
Head gasket set (recessed type cylinder bore head gasket)
Sump gasket set (Inc oil seals)
Oil filter

Why not add some of all of the following options to the rebuild kit:
Crankshaft
Camshaft
Rocker shaft
Rocker arm
Camshaft sprocket
Con rods or small end bearings
In addition to the rebuild kits, the engine section lists all other parts that you might want to buy additionally, such as engine studs, cylinder head nuts, water pump etc.
Model-2.5Pi Mk2
Rate and Review this Product
RM8046R3BK
Out of stock, expected soon. Add to cart and Back Order
£680.00 ex VAT£816.00 inc UK VAT
Quantity
This kit contains everything you need to recondition your full engine. We assume you will have the block re-bored and any other machining done as required.

IMPORTANT-Pistons are supplied +0.20” oversize. Bearing sets are supplied in standard size. Please advise specific sizes required at time of ordering.

Kit Contains:
Flat top piston set +0.020" oversize (Inc rings/pins) State size required
Main & big end bearing shells (State size required)
Thrust washers (State size required)
Inlet Valves
Exhaust valves
Valve springs
Valve guides
Valve stem oil seals
Tappets
Timing chain
Timing chain tensioner
Crankshaft sprocket
Oil pump
Oil pressure relief valve
Oil pressure relief valve spring
Oil pressure switch
Head gasket set (recessed type cylinder bore head gasket)
Sump gasket set (Inc oil seals)
Oil filter

Why not add some of all of the following options to the rebuild kit:
Crankshaft
Camshaft
Rocker shaft
Rocker arm
Camshaft sprocket
Con rods or small end bearings
In addition to the rebuild kits, the engine section lists all other parts that you might want to buy additionally, such as engine studs, cylinder head nuts, water pump etc.
Model-2500S & 2500TC
Rate and Review this Product
RR1532R2BK
Out of stock, expected soon. Add to cart and Back Order
£660.00 ex VAT£792.00 inc UK VAT
Quantity

Related Items

12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Great site, generally has all the info required about items to be able to positively order something." Customer Comment
Product Description

Triumph 2000/2500/2.5Pi Full Engine Rebuild Kits