Triumph Spitfire Front Panels and Bonnet (MkIV and 1500)

 GRID005862
  • Triumph Spitfire Front Panels and Bonnet (MkIV and 1500)

Prices displayed in:
Faithfully manufactured in the UK using the original press tools and assembly jigs, this bonnet represents an opportunity to replace one third of your cars bodywork in one easy step whilst still retaining it's Triumph originality!

Supplied complete with hinge/support tubes 911108, 911107 and cross tube 911150.

The cathodically-applied two-pack electrocoat medium build primer is of the highest quality and ideal for use under topcoats.

The primer:
1. Meets the following stringent requirements:
  • The receiving metal is stoved at a minimum of 180ºC for 12 minutes
  • The film build is a minimum of 16 microns and maximum of 35 microns
2. Samples have been subjected to and passed tests for:
  • Adhesion - performed within 30 minutes of painting
  • Salt spray resistance - item subjected to 840 hours of salt spray
  • Water resistance - item subjected to 240 hours of water soak
  • Cyclic corrosion tests - performed to customer requirements
  • Petrol immersion - item immersed in petrol for 1 hour at a temperature of 22 ± 3ºC
  • Engine oil immersion - item immersed in engine oil (SAE 15/40) for 3 hours at 120 ± 1ºC for 96 hours at ambient temperature
  • DERV - item immersed in DERV for 24 hours at ambient temperature
  • White spirit - item immersed in white spirit for 15 minutes at ambient temperature wiped backwards and forwards 20 times
  • Anti-freeze - item immersed in 50 percent anti-freeze for 1 hour at 70ºC
  • Brake fluid - item immersed in brake fluid for 24 hours at 20 ± 5ºC
  • Petrol/white spirit - item immersed for 24 hours at ambient temperature in a 2:1 mixture of petrol and white spirit
  • Heat test - item heated for 1 hour at 149 ± 3ºC
  • Pencil hardness - the paint film tested for hardness with a 4H pencil
3. Related specifications:
Ford - SKM 64J 9554C/D
General Motors - GME 00 007
Rover - RES 22 OF. 01
Jaguar - JMS 20.17.01
Qty Req-1
£1,600.00 ex VAT
£1,920.00 inc UK VAT
Quantity
Additional Packing Charge:
Holes pre-drilled for cruise lights.
Qty Req-1
Usually in stock at our supplier, allow 1 week for delivery
£1,600.00 ex VAT
£1,920.00 inc UK VAT
Quantity
Additional Packing Charge:
Bonnet - front
Qty Req-1
£65.00 ex VAT
£78.00 inc UK VAT
Quantity
£135.00 ex VAT
£162.00 inc UK VAT
Quantity
£135.00 ex VAT
£162.00 inc UK VAT
Quantity
£90.00 ex VAT
£108.00 inc UK VAT
Quantity
£90.00 ex VAT
£108.00 inc UK VAT
Quantity
Usually in stock at our supplier, allow 1 week for delivery
£75.00 ex VAT
£90.00 inc UK VAT
Quantity
£3.40 ex VAT
£4.08 inc UK VAT
Quantity
Seal Clip 608520
Qty Req-18
£0.55 ex VAT
£0.66 inc UK VAT
Quantity
£95.00 ex VAT
£114.00 inc UK VAT
Quantity
£95.00 ex VAT
£114.00 inc UK VAT
Quantity
£0.13 ex VAT
£0.16 inc UK VAT
Quantity
£0.13 ex VAT
£0.16 inc UK VAT
Quantity
£0.12 ex VAT
£0.14 inc UK VAT
Quantity
Spanner size 3/4 AF
Hexagon Headed
28tpi
Qty Req-4
£0.98 ex VAT
£1.18 inc UK VAT
Quantity
£0.33 ex VAT
£0.40 inc UK VAT
Quantity
£0.13 ex VAT
£0.16 inc UK VAT
Quantity
Requires 2 x GHF201 nuts and 2 x GHF301 washers - sold separately.
Qty Req-2
£3.70 ex VAT
£4.44 inc UK VAT
Quantity
Get rid of that rattle and keep your bonnet secure!

Easy to fit and a direct replacement for your Triumph’s bonnet locator cone, Polybush’s 35M retains its shape and does not become brittle, ensuring the bonnet will remain securely closed.

In partnership with Rimmer Bros, Polybush designed and manufactured the 35M after a common failure was identified – After a long working relationship with suspension bushes, they knew the properties of the Polybush material would make it a perfect alternative for the original rubber component – All Polybush parts are manufactured in the UK using only high-quality pure materials, providing strong longevity, flexibility, and durability.

Requires 2 x GHF201 nuts and 2 x GHF301 washers - sold separately.







  
Qty Req-2
£8.20 ex VAT
£9.84 inc UK VAT
Quantity
Complete with nuts and spring washers, unfortunately only suitable for some models as has an M8 thread which will not screw into the imperial captive nut fitted to certain Triumph models.
Qty Req-2
£0.20 ex VAT
£0.24 inc UK VAT
Quantity
£0.12 ex VAT
£0.14 inc UK VAT
Quantity
£5.25 ex VAT
£6.30 inc UK VAT
Quantity
Customer Comments
"I appreciate the wide selection and competitive pricing. As I'm just starting a total restoration of a 1958 TR3A, I'm sure I will be purchasing a lot more in the future." Customer Comment
Product Description

Triumph Spitfire Front Panels and Bonnet (MkIV and 1500)

Unsure what part you need?

Contact our team of experts to talk makes, models, performance, and parts!! With over 42 years in business, our team are here to help you rebuild, restore, and maintain your car.

Contact our team to talk makes, models, performance, and parts!!