Product Description
Triumph Spitfire Full Engine Rebuild Kits
MKIV CYLINDER BLOCK IDENTIFICATION
Recessed or Non-Recessed Cylinder Bores?
EARLY MkIV engines (to engine number FH25000E) have (as all previous Spitfires) Non-Recessed cylinder bores, and use a plain head gasket.
LATE MkIV (from engine number FH25001E), and ALL 1500 engines have a Recessed Lip at the top of the cylinder bores adjacent to the block face, necessitating a particular type of head gasket, which can be identified by a small 'Tag' that stands proud at the rear of the block.
This kit contains everything you need to recondition your full engine. We assume you will have the block re-bored and any other machining done as required.
IMPORTANT - Pistons are supplied +0.020" oversize. Bearing sets are supplied in standard size. Please advise specific sizes required at time of ordering.
Kit contains -
Piston set +0.020" oversize (inc rings/pins) (state size required)
Main & big end bearing shells (state size required)
Thrust washers (state size required)
Inlet valves
Exhaust valves
Valve springs
Valve guides
Tappets
Timing chain
Timing chain tensioner
Crankshaft sprocket
Oil pump
Oil pressure relief valve
Oil pressure relief valve spring
Oil pressure switch
Head gasket set
Sump gasket set (inc oil seals)
Oil filter
Additionally why not add some or all of the following options to the rebuild kit;
Crankshaft
Camshaft
Rocker shaft
Rocker arms
Camshaft sprocket
Con rods
In addition to the rebuilt kits, our engine sections list all the other parts you might want to buy additionally, such as engine studs, cylinder head nuts, water pump etc.