Triumph Herald Switches and Controls - Column Mounted

 GRID005498
  • Triumph Herald Switches and Controls - Column Mounted

Prices displayed in:
Attached with a circular clamp which meant you had to remove the steering column assembly to fit it!
Qty Req-1, Model-Herald 13/60 when fitted
Rate and Review this Product
2190611
In stock
Most orders placed now ship tomorrow!
£76.00 ex VAT
£91.20 inc UK VAT
Quantity
Rate and Review this Product
158966P
In stock
Most orders placed now ship tomorrow!
£41.00 ex VAT
£49.20 inc UK VAT
Quantity
Please note the threads for this item is M4, therefore the original type will not fit.

Positive + : Wire Color Blue/ Red
Turn Left: Negative -: Wire color Green/Orange
Turn Right: Negative -: Wire color Green/White

New Line - Lucas Brand - The brand's famous green boxes have been a familiar feature of garages across the globe for decades. That’s because Lucas have always provided the parts that mechanics trust and keep close at hand to get the job done. It’s still true today. The Lucas portfolio covers premium quality products for automotive, motorcycle and home use.

Lucas products are driven by engineering excellence and a spirit of innovation that’s ensured our continued global success. The brand's reputation is built on an extensive range, exceptional technical durability and endurance, and outstanding quality.

Lucas has been providing all this for over 135 years - and we’re still growing. That’s why the brand has been continuously trading longer than any other automotive component brand in the world.
Qty Req-1
4 out of 5 starsRead 1 Review(s)Rate and Review this Product
158966PLUCAS
Out of stock, expected soon Mar 28, 2025. Add to cart and Back Order
£49.50 ex VAT
£59.40 inc UK VAT
Quantity
Side, main, dip & flash.
Qty Req-1
Rate and Review this Product
147278
In stock
Most orders placed now ship tomorrow!
£114.00 ex VAT
£136.80 inc UK VAT
Quantity
Rate and Review this Product
131276
In stock
Most orders placed now ship tomorrow!
£93.00 ex VAT
£111.60 inc UK VAT
Quantity
Side, main, dip & flash.
Qty Req-1, Model-Herald 13/60, Side, main, dip & flash
Rate and Review this Product
147278
In stock
Most orders placed now ship tomorrow!
£114.00 ex VAT
£136.80 inc UK VAT
Quantity
Rate and Review this Product
147279
In stock
Most orders placed now ship tomorrow!
£81.00 ex VAT
£97.20 inc UK VAT
Quantity
Qty Req-2, indicator & lighting stalks
Rate and Review this Product
708479
In stock
Most orders placed now ship tomorrow!
£15.70 ex VAT
£18.84 inc UK VAT
Quantity
3 position - side/main/dip

How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1, Transfers for 708479 covers
Rate and Review this Product
611400
In stock
Most orders placed now ship tomorrow!
£3.85 ex VAT
£4.62 inc UK VAT
Quantity
How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1, Transfers for 708479 covers
4.5 out of 5 starsRead 2 Review(s)Rate and Review this Product
611012
In stock
Most orders placed now ship tomorrow!
£2.90 ex VAT
£3.48 inc UK VAT
Quantity
How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1, Transfers for 708479 covers
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
611011
In stock
Most orders placed now ship tomorrow!
£3.60 ex VAT
£4.32 inc UK VAT
Quantity
5 out of 5 starsRead 2 Review(s)Rate and Review this Product
150277
In stock
Most orders placed now ship tomorrow!
£39.50 ex VAT
£47.40 inc UK VAT
Quantity
Rate and Review this Product
204741
In stock
Most orders placed now ship tomorrow!
£12.10 ex VAT
£14.52 inc UK VAT
Quantity
Different length brushes are fitted according to different types of steering wheels. This one is the standard length as fitted to original spec. steering wheels. If a non original steering wheel has been fitted a longer horn brush may be required.

Please measure the brush length before ordering. If a longer horn brush is required; please order part number 142534X.
Qty Req-1, horn push
Rate and Review this Product
142534
In stock
Most orders placed now ship tomorrow!
£10.50 ex VAT
£12.60 inc UK VAT
Quantity
Different length brushes are fitted according to different types of steering wheels. This one is longer than that fitted to original spec. steering wheels and may be required if a non original steering wheel has been fitted.

Please measure the length of the brush fitted to your vehicle to ensure you are ordering the correct part. If the standard brush is required; please order part number 142534.
Qty Req-1, horn bush
Rate and Review this Product
142534X
Out of stock, expected soon. Add to cart and Back Order
£19.30 ex VAT
£23.16 inc UK VAT
Quantity
Fits on right hand side of column.
Qty Req-1
Rate and Review this Product
147280
Out of stock, expected soon Mar 31, 2025. Add to cart and Back Order
£49.00 ex VAT
£58.80 inc UK VAT
Quantity
Fits on left hand side of column
Qty Req-1
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
147281
In stock
Most orders placed now ship tomorrow!
£39.50 ex VAT
£47.40 inc UK VAT
Quantity
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Have been a Rimmer Bros customer for around 10 years, always pleased with the service and help from staff." Customer Comment
Product Description

Triumph Herald Switches and Controls - Column Mounted

✆ ✉

Unsure what part you need?

Contact our team of experts to talk makes, models, performance, and parts!! With over 42 years in business, our team are here to help you rebuild, restore, and maintain your car.

Contact our team to talk makes, models, performance, and parts!!

Speak To An Expert

 or call 01522 568000 / 1-855-746-2767