Triumph TR4-250 Windscreen and Frame

Order your Triumph TR4-250 Windscreen and Frame ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID200821

Prices displayed in:
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
906707CLEAR
In stock
£93.00 ex VAT£111.60 inc UK VAT
Quantity
Additional Packing Charge:
Rate and Review this Product
906707TINTED
In stock
£93.00 ex VAT£111.60 inc UK VAT
Quantity
Additional Packing Charge:
37
Will need cutting and re-gluing to fit Herald Coupe Rear Screen

Please note: Some windscreen seals may be a tight fitment for original windscreens and are generally intended for replacement windscreens of which are a lesser thickness.
Qty Req-1
Rate and Review this Product
913442
In stock
£34.00 ex VAT£40.80 inc UK VAT
Quantity
For fitting windscreens with plastic/rubber inserts on older vehicles.

Contents:
Tool Handle,
2 eyes 10.5mm and 17mm
lipping tools with Hex Key for fixing

New from Gunson is this windscreen installation tool set which will prove invaluable to owners of many classic cars and caravans.

Two eyes (10.5mm and 17mm) are included - these are assembled to the tool with the nylon roller and are used to fit the filler strip insert used on so many vehicles and caravans from the 1950s and ‘60s, including Triumph, Mini, MG and Jensen.

Two lipping tools are included which are used for pulling the rubber windscreen lip back over the glass or metalwork. A hex key is also included to secure the tools to the non-slip handle.
Qty Req-1, Item Info 2-windscreen seal
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
RX1963
In stock
£13.00 ex VAT£15.60 inc UK VAT
Quantity
41
These locking plates have the locking provision in an alternative position to the original. The original style is no longer available, however these are a suitable alternative. The handle on the hood frame can be removed and relocated 90 or 180 degrees to suit the replacement locking plates.
Qty Req-1, Model-TR5 from CP2067, TR250 from CD4489, Item Info 2-header rail clamp
Rate and Review this Product
622239
In stock
£22.50 ex VAT£27.00 inc UK VAT
Quantity
42
These locking plates have the locking provision in an alternative position to the original. The original style is no longer available, however these are a suitable alternative. The handle on the hood frame can be removed and relocated 90 or 180 degrees to suit the replacement locking plates.
Qty Req-1, Model-TR5 from CP2067, TR250 from CD4489, Item Info 2-header rail clamp
Rate and Review this Product
622240
In stock
£22.50 ex VAT£27.00 inc UK VAT
Quantity
51
The windscreen capping should be sealed to the top of the windscreen frame by applying silicone sealant (GHF6093) before attachment.
Omission of the sealant will invariably result in water seepage through to the passenger compartment.
Ensure before applying the sealant that all traces of previously used sealant have been removed from both windscreen frame and capping.
Qty Req-1, Model-TR4 Soft Top & Surrey Top
Rate and Review this Product
806189
In stock
£78.00 ex VAT£93.60 inc UK VAT
Quantity
51
The windscreen capping should be sealed to the top of the windscreen frame by applying silicone sealant (GHF6093) before attachment.
Omission of the sealant will invariably result in water seepage through to the passenger compartment.
Ensure before applying the sealant that all traces of previously used sealant have been removed from both windscreen frame and capping.
Qty Req-1, Model-TR4A, TR5, TR250 Surrey Top
Rate and Review this Product
806189
In stock
£78.00 ex VAT£93.60 inc UK VAT
Quantity
51
The windscreen capping should be sealed to the top of the windscreen
frame by applying silicone sealant (GHF6093) before attachment.
Omission of the sealant will invariably result in water seepage through
to the passenger compartment.
Ensure before applying the sealant that all traces of previously used
sealant have been removed from both windscreen frame and capping.
Qty Req-1, Model-TR4A Soft Top
Rate and Review this Product
808231
In stock
£91.00 ex VAT£109.20 inc UK VAT
Quantity
51
The windscreen capping should be sealed to the top of the windscreen
frame by applying silicone sealant (GHF6093) before attachment.
Omission of the sealant will invariably result in water seepage through
to the passenger compartment.
Ensure before applying the sealant that all traces of previously used
sealant have been removed from both windscreen frame and capping.
Qty Req-1, Model-TR5, TR250 Soft Top
Rate and Review this Product
812400
In stock
£78.00 ex VAT£93.60 inc UK VAT
Quantity
54
We recommend this metal male body stud is used when the female part on the material is also metal, see 554517 and 713501.
If the female part on the material is plastic we recommend replacing with the metal versions, since plastic body stud 713511ORIG is no longer available and a metal body stud will cause premature failure of a plastic popper.
Qty Req-2, Model-Surrey Top Models
Rate and Review this Product
610624
In stock
£0.68 ex VAT£0.82 inc UK VAT
Quantity
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Excellent site well laid out and prices are very good." Customer Comment
Product Description

Triumph TR4-250 Windscreen and Frame
In order to improve the wearing qualities of the hood attachment to windscreen frame, replacement catch plates were offered by Triumph from May 1968.
Early TR4s used a 2 piece glazing rubber finisher; the later finisher (613954) is a one piece item and is what is supplied for all applications today.  The early TR4 design may be easily replicated by cutting the new finisher and using two finisher clips instead of one.