Triumph Spitfire Steering Column - Mk1, Mk2, Mk3, MkIV and Early 1500

Order your Triumph Spitfire Steering Column - Mk1, Mk2, Mk3, MkIV and Early 1500 ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID005790

Prices displayed in:
A replacement bush, manufactured from a modern plastic bearing material which can operate with much closer tolerances than the original bush could. The new bush is supported by a Superpro polyurethane outer 'tyre' which locates in the outer column in the same way as the original bush.
£27.50 ex VAT£33.00 inc UK VAT
Quantity
£2.65 ex VAT£3.18 inc UK VAT
Quantity
Spanner size 3/4 AF
Hexagon Headed
28tpi
£0.58 ex VAT£0.70 inc UK VAT
Quantity
Connects to steering knuckle & upper steering shaft
£96.00 ex VAT£115.20 inc UK VAT
Quantity
Spanner size 1/2 AF
Hexagon Headed
24tpi
£0.93 ex VAT£1.12 inc UK VAT
Quantity
Spanner size 1/2 AF
Hexagon Headed
24tpi
£0.93 ex VAT£1.12 inc UK VAT
Quantity
Attached with a circular clamp which meant you had to remove the steering column assembly to fit it!
£72.00 ex VAT£86.40 inc UK VAT
Quantity
Attached with a circular clamp which meant you had to remove the steering column assembly to fit it!
£72.00 ex VAT£86.40 inc UK VAT
Quantity
With Lucar connections - 3 pairs and 1 single terminal

When used as a replacement for Stag MK1 (To LD20000 inc USA) Ignition Switch, to modify wiring, fit spade connectors to terminals 1, 2, 3 & 5 and transfer from original loom Brown wire to terminal 2, White & Pink to terminal 5, White to terminal 3 and White & Red to terminal 1. The remaining Red & Red/Green wires are for a sidelight functionality that prevents driving off with the sidelights only and can be insulated for safety and ignored.

This information is applicable to Stag MK1 (inc USA) only. Other models may require similar modifications if fitting this switch in place of one with the loom attached. Please refer to the appropriate workshop manual.
£39.00 ex VAT£46.80 inc UK VAT
Quantity
With Lucar connections - 3 pairs and 1 single terminal

When used as a replacement for Stag MK1 (To LD20000 inc USA) Ignition Switch, to modify wiring, fit spade connectors to terminals 1, 2, 3 & 5 and transfer from original loom Brown wire to terminal 2, White & Pink to terminal 5, White to terminal 3 and White & Red to terminal 1. The remaining Red & Red/Green wires are for a sidelight functionality that prevents driving off with the sidelights only and can be insulated for safety and ignored.

This information is applicable to Stag MK1 (inc USA) only. Other models may require similar modifications if fitting this switch in place of one with the loom attached. Please refer to the appropriate workshop manual.
£39.00 ex VAT£46.80 inc UK VAT
Quantity
£0.55 ex VAT£0.66 inc UK VAT
Quantity
£5.40 ex VAT£6.48 inc UK VAT
Quantity
£1.35 ex VAT£1.62 inc UK VAT
Quantity
Customer Comments
"I appreciate the wide selection and competitive pricing. As I'm just starting a total restoration of a 1958 TR3A, I'm sure I will be purchasing a lot more in the future." Customer Comment
Product Description

Triumph Spitfire Steering Column - Mk1, Mk2, Mk3, MkIV and Early 1500
1500 only to FH100020

NOTE; Steering column lock/ignition switch was offered as a factory fitted option for Mk1, M2 & Mk3.

Review: Liviu Submitted: 18/11/2021

Overall5 out of 5 stars.

verified

Subject

Part Worked Perfectly

Did this item work well with your project? What vehicle type are you using this for?

Triumph spitfire