Rover 400/45/MG ZS Cylinder Head, Camshaft - 1400 Petrol 8V K Series

Order your Rover 400/45/MG ZS Cylinder Head, Camshaft - 1400 Petrol 8V K Series ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Illustrated Items Not Listed Are Currently Not Available
Part No.: GRID003251

Prices displayed in:
2
Used with the exhaust camshaft only.
Originally supplied with the camshaft, although depending on available stock this may now not be the case. 
To Prefix-14K2FL64, To SN-673235, CP Type-Engine, Qty Req-1, Application-MPi
Rate and Review this Product
PA112150
In stock
£1.18 ex VAT£1.42 inc UK VAT
Quantity
K series 4 cylinder front (timing belt end) cam seals
Qty Req-2
Rate and Review this Product
LUC100290L
In stock
£10.99 ex VAT£13.19 inc UK VAT
Quantity
5
Use with alloy sump.
For the Multi Layered Steel (MLS) gasket to seal correctly it is important that the cylinder liner heights are at least 4 thou (0.1mm) above the block AND are all even. A shim kit LCJ000050SHIM (containing 4 x 0.1mm shims) is available if the liners have sunk below the recommended heights.
Qty Req-1, Application-MPi
Rate and Review this Product
LVB500190
This part has been superseded
Use LVB500190A
5
Developed for the EU4 compliant version of the K Series.
Use with alloy sump and oil rail LCN000140L
For the Multi Layered Steel (MLS) gasket to seal correctly it is important that the cylinder liner heights are at least 4 thou (0.1mm) above the block AND are all even. A shim kit LCJ000050SHIM (containing 4 x 0.1mm shims) is available if the liners have sunk below the recommended heights.
Qty Req-1, Application-MPi
Rate and Review this Product
LVB500190A
In stock
£125.00 ex VAT£150.00 inc UK VAT
Quantity
5
Use with Oil Rail LCN000140L
For the Multi Layered Steel (MLS) gasket to seal correctly it is important that the cylinder liner heights are at least 4 thou (0.1mm) above the block AND are all even.
A shim kit LCJ000050SHIM (containing 4 x 0.1mm shims) is available if the liners have sunk below the recommended heights.
Qty Req-1, Application-MPi
Rate and Review this Product
LVB500190AP1
In stock
£29.50 ex VAT£35.40 inc UK VAT
Quantity
5
Note: This is the old design gasket , for the multi-layer gasket use part number LVB500190A and
for the multi- layer gasket plus new strengthened oil rail and bolts use part number ZUA000530.
Qty Req-1, Application-MPi
Rate and Review this Product
LVB000320
This part has been superseded
Use LVB000321
6
Stretch bolt (fit new whenever removed).
Qty Req-10, Application-MPi
Rate and Review this Product
WAM2293
In stock
£8.00 ex VAT£9.60 inc UK VAT
Quantity
6
Uprated head bolt kit.

10.9 grade bolts offer superior strength over standard. Must fitted as a complete set of 10.

For alloy sump engines use with upgraded, multi layer head gasket LVB90025A and strengthened oil rail LCN000140L for the most effective solution for your K-Series.
Qty Req-10, Application-MPi
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
WAM2293URKIT
Out of stock, expected soon Feb 12, 2025. Add to cart and Back Order
£61.00 ex VAT£73.20 inc UK VAT
Quantity
Rate and Review this Product
WAM2293KENT
Usually in stock at our supplier, allow 1 week for delivery
£570.00 ex VAT£684.00 inc UK VAT
Quantity
Rate and Review this Product
LVP100390
Usually in stock at our supplier, allow 2-3 working days for despatch
£19.18 ex VAT£23.02 inc UK VAT
Quantity
Rate and Review this Product
LGJ10031
Usually in stock at our supplier, allow 2-3 working days for despatch
£9.52 ex VAT£11.42 inc UK VAT
Quantity
Rate and Review this Product
LYU100290L
Usually in stock at our supplier, allow 2-3 working days for despatch
£0.78 ex VAT£0.94 inc UK VAT
Quantity
Rate and Review this Product
LGH101180SLP
Usually in stock at our supplier, allow 2-3 working days for despatch
£34.00 ex VAT£40.80 inc UK VAT
Quantity
Rate and Review this Product
LGR000050L
Usually in stock at our supplier, allow 2-3 working days for despatch
£33.74 ex VAT£40.49 inc UK VAT
Quantity
23
Introducing the Hydraulic Tappet LGR000050LP - Aftermarket, a reliable and high-quality solution designed to optimize engine performance and reduce wear and tear. This aftermarket hydraulic tappet is expertly engineered to fit a variety of vehicle models, including the Land Rover Discovery 1, Land Rover Freelander 1, and Rover 200/25/MG ZR.
  • Land Rover Hydraulic Tappet
  • Rover Hydraulic Tappet
  • Aftermarket Hydraulic Tappet
Qty Req-8, Application-MPi
Rate and Review this Product
LGR000050LP
In stock
£6.45 ex VAT£7.74 inc UK VAT
Quantity
23
A hydraulic tappet, also known as a hydraulic valve lifter or hydraulic lash adjuster, is a device for maintaining zero valve clearance in an internal combustion engine.
Qty Req-8, Application-MPi
Rate and Review this Product
LGR000050SLPP1K16
In stock
£107.00 ex VAT£128.40 inc UK VAT
Quantity
24
The Stud M8 - M8 x 25 - TE108051 is a versatile and essential component designed to fit both the Series 3 and Rover 200/25/MG ZR, ensuring a secure and reliable connection for various automotive applications. This reliable stud offers durability and precision for a range of uses in these vehicles.
  • Stud M8 - M8 x 25
  • Series 3 Stud M8 - M8 x 25
  • Rover 200/25/MG ZR Stud M8 - M8 x 25
Qty Req-2, Application-MPi
Rate and Review this Product
TE108051
In stock
£3.10 ex VAT£3.72 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
LYU000010L
Usually in stock at our supplier, allow 2-3 working days for despatch
£2.76 ex VAT£3.31 inc UK VAT
Quantity
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Very easy site to navigate, identify & select replacement parts for my Rover 75 V6 car, very reasonable prices and postage costs to Australia. a pleasure to Deal with Rimmer Bros" Customer Comment
Product Description

Rover 400/45/MG ZS Cylinder Head, Camshaft - 1400 Petrol 8V K Series