Prices displayed in: GB Pound Euro US Dollar AUD NZD
Exmoor Trim - Series II & III - Standard Front Seats

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either BOLT fitting or PIN type fitting on the pivot point. Please state whether you require BOLT or PIN in the comments box on the payment screen. If nothing is stated we will send PIN type.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

elephant_hide
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£317.44 ex VAT£380.93 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Seat

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Driver and passenger backs are available with either BOLT fitting or PIN type fitting on the pivot point. Please state whether you require BOLT or PIN in the comments box on the payment screen. If nothing is stated we will send PIN type


Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

black_vinyl
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£191.40 ex VAT£229.68 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Seat

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Driver and passenger backs are available with either BOLT fitting or PIN type fitting on the pivot point. Please state whether you require BOLT or PIN in the comments box on the payment screen. If nothing is stated we will send PIN type

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

grey_vinyl
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£201.19 ex VAT£241.43 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Outer Back Bolt Type

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

black_vinyl
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£43.36 ex VAT£52.03 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Outer Back Bolt Type

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

grey_vinyl
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£46.53 ex VAT£55.84 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Outer Back Pin Type

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

black_vinyl
-
In stock
Most orders ship today!
£43.36 ex VAT£52.03 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Outer Back Pin Type

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

grey_vinyl
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£46.53 ex VAT£55.84 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Outer Back Pin Type

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

elephant_hide
-
In stock
Most orders ship today!
£63.95 ex VAT£76.74 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Outer Base

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

grey_vinyl
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£26.86 ex VAT£32.23 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Outer Base

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

elephant_hide
-
Out of stock, expected soon Nov 11, 2019. Add to cart and Back Order
£45.11 ex VAT£54.13 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Outer Base Adjustable

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

black_vinyl
-
In stock
Most orders ship today!
£28.57 ex VAT£34.28 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Outer Base Adjustable

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

grey_vinyl
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£29.37 ex VAT£35.24 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Outer Base Adjustable

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

elephant_hide
-
Out of stock, expected soon Nov 11, 2019. Add to cart and Back Order
£47.96 ex VAT£57.55 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Centre Back

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

black_vinyl
-
In stock
Most orders ship today!
£43.05 ex VAT£51.66 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Centre Back

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

grey_vinyl
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£45.09 ex VAT£54.11 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Centre Back

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

elephant_hide
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£61.66 ex VAT£73.99 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Centre Base

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

black_vinyl
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£22.48 ex VAT£26.98 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Centre Base

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

grey_vinyl
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£23.34 ex VAT£28.01 inc UK VAT
Quantity
Exmoor Trim - Series II & III - Standard Front Centre Base

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produces a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps then these are available separately.

elephant_hide
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£44.53 ex VAT£53.44 inc UK VAT
Quantity
Series II & III - Deluxe Front Seats

This style of traditional Deluxe Series III seating is only available in Black Vinyl. Please note that these seats are also available as backs or bases on their own.
This style of seat was used throught the production run of the Series III Land Rover with its distinctive, sculptured seats and face fluting running from front to back in the centre panels of the seats. The outer seat backs bolt in and also have internal threads for the locking positions. The centre seat back mounts with the pint type fiting. The outer bases and centre bases sit into the seat frames and are removable to allow access to the seat box compartments.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts. If you require leather retaining straps, these are available separately

black_vinyl
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£30.45 ex VAT£36.54 inc UK VAT
Quantity
Launching the new Hi-Back EXTREME MKII.

Offering an easy upgrade for the earlier Series and MOD early Defenders.

These new Hi-Back Extreme seats install straight into your existing mountings, offering a good cost effective seat that looks the part and is the part.

With a very good all round comfort level and twin stalk adjustable headrest that can be easily removed with the quick release retaining tabs. the Hi-Back Extreme can also be easily fitted with internal seat heaters and pneumatic back lumbars, although the seats offer superb lumbar support and moderately raised sides to the cushion shape giving that much needed extra hold and support from the old leaf spring ride. The added benefit of seat heaters goes without saying!

Please note that the seat backs are all steel internal frames with adjustable headrests and internal diaphragms for a solid and safe seat.

The seat bases will fit in exactly the same way as the original seats fitted, you may or may not require Leather straps for seat back or base this will depend very much on which vehicle they are to be installed. If you have adjustable seat frames (on sliders) then you will not require any base straps if your cushions are loose then a 140mm leather strap will be required if you are not able to remove and utilise the old one.

The seat backs mount into the original frames with 1/4 UNF Collar pivot bolts with plastic wear washers and locking bolt depending on the frame in-situ, these are supplied new with the seats.

You may require a Leather retaining strap for the seat back if you don't have slider units to keep the seat back upright when not in use, for this you would require 100mm leather straps.

You may also need bulkhead buffers to fit either to the back of the seat where required or, if preferred, to the bulkhead or seat back bar in 109 station wagons.

Available in a wide range of materials these Extreme MKII seats make a big difference to the seating posture and ride, without pushing you forward !

black_leather
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£317.01 ex VAT£380.41 inc UK VAT
Quantity
Launching the new Hi-Back EXTREME MKII.

Offering an easy upgrade for the earlier Series and MOD early Defenders.

These new Hi-Back Extreme seats install straight into your existing mountings, offering a good cost effective seat that looks the part and is the part.

With a very good all round comfort level and twin stalk adjustable headrest that can be easily removed with the quick release retaining tabs. the Hi-Back Extreme can also be easily fitted with internal seat heaters and pneumatic back lumbars, although the seats offer superb lumbar support and moderately raised sides to the cushion shape giving that much needed extra hold and support from the old leaf spring ride. The added benefit of seat heaters goes without saying!

Please note that the seat backs are all steel internal frames with adjustable headrests and internal diaphragms for a solid and safe seat.

The seat bases will fit in exactly the same way as the original seats fitted, you may or may not require Leather straps for seat back or base this will depend very much on which vehicle they are to be installed. If you have adjustable seat frames (on sliders) then you will not require any base straps if your cushions are loose then a 140mm leather strap will be required if you are not able to remove and utilise the old one.

The seat backs mount into the original frames with 1/4 UNF Collar pivot bolts with plastic wear washers and locking bolt depending on the frame in-situ, these are supplied new with the seats.

You may require a Leather retaining strap for the seat back if you don't have slider units to keep the seat back upright when not in use, for this you would require 100mm leather straps.

You may also need bulkhead buffers to fit either to the back of the seat where required or, if preferred, to the bulkhead or seat back bar in 109 station wagons.

Available in a wide range of materials these Extreme MKII seats make a big difference to the seating posture and ride, without pushing you forward !

grey_vinyl
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£202.76 ex VAT£243.31 inc UK VAT
Quantity
Launching the new Hi-Back EXTREME MKII.

Offering an easy upgrade for the earlier Series and MOD early Defenders.

These new Hi-Back Extreme seats install straight into your existing mountings, offering a good cost effective seat that looks the part and is the part.

With a very good all round comfort level and twin stalk adjustable headrest that can be easily removed with the quick release retaining tabs. the Hi-Back Extreme can also be easily fitted with internal seat heaters and pneumatic back lumbars, although the seats offer superb lumbar support and moderately raised sides to the cushion shape giving that much needed extra hold and support from the old leaf spring ride. The added benefit of seat heaters goes without saying!

Please note that the seat backs are all steel internal frames with adjustable headrests and internal diaphragms for a solid and safe seat.

The seat bases will fit in exactly the same way as the original seats fitted, you may or may not require Leather straps for seat back or base this will depend very much on which vehicle they are to be installed. If you have adjustable seat frames (on sliders) then you will not require any base straps if your cushions are loose then a 140mm leather strap will be required if you are not able to remove and utilise the old one.

The seat backs mount into the original frames with 1/4 UNF Collar pivot bolts with plastic wear washers and locking bolt depending on the frame in-situ, these are supplied new with the seats.

You may require a Leather retaining strap for the seat back if you don't have slider units to keep the seat back upright when not in use, for this you would require 100mm leather straps.

You may also need bulkhead buffers to fit either to the back of the seat where required or, if preferred, to the bulkhead or seat back bar in 109 station wagons.

Available in a wide range of materials these Extreme MKII seats make a big difference to the seating posture and ride, without pushing you forward !

landrover_brown_logo
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£221.31 ex VAT£265.57 inc UK VAT
Quantity
Launching the new Hi-Back EXTREME MKII.

Offering an easy upgrade for the earlier Series and MOD early Defenders.

These new Hi-Back Extreme seats install straight into your existing mountings, offering a good cost effective seat that looks the part and is the part.

With a very good all round comfort level and twin stalk adjustable headrest that can be easily removed with the quick release retaining tabs. the Hi-Back Extreme can also be easily fitted with internal seat heaters and pneumatic back lumbars, although the seats offer superb lumbar support and moderately raised sides to the cushion shape giving that much needed extra hold and support from the old leaf spring ride. The added benefit of seat heaters goes without saying!

Please note that the seat backs are all steel internal frames with adjustable headrests and internal diaphragms for a solid and safe seat.

The seat bases will fit in exactly the same way as the original seats fitted, you may or may not require Leather straps for seat back or base this will depend very much on which vehicle they are to be installed. If you have adjustable seat frames (on sliders) then you will not require any base straps if your cushions are loose then a 140mm leather strap will be required if you are not able to remove and utilise the old one.

The seat backs mount into the original frames with 1/4 UNF Collar pivot bolts with plastic wear washers and locking bolt depending on the frame in-situ, these are supplied new with the seats.

You may require a Leather retaining strap for the seat back if you don't have slider units to keep the seat back upright when not in use, for this you would require 100mm leather straps.

You may also need bulkhead buffers to fit either to the back of the seat where required or, if preferred, to the bulkhead or seat back bar in 109 station wagons.

Available in a wide range of materials these Extreme MKII seats make a big difference to the seating posture and ride, without pushing you forward !

black_logo
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£221.31 ex VAT£265.57 inc UK VAT
Quantity
Series II & III - Extreme Seats

For extreme comfort in your Series Land Rover why not upgrade and fit our high back seats for the driver and passenger? The seat back is twice the height of a standard seat back with integral head rest, rear pocket and internal steel frames for strength and durability (tested). The seat back is designed with the taller driver in mind allowing you to get further away from the wheel with its sculptured back and raised base sides it will hold you in place off or on road making those longer journeys easier.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts & leather retaining straps.

This seat will also fit most early type ex military Land Rovers that were fitted with standard series type seats.

moorland
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£228.38 ex VAT£274.06 inc UK VAT
Quantity
Launching the new Hi-Back EXTREME MKII.

Offering an easy upgrade for the earlier Series and MOD early Defenders.

These new Hi-Back Extreme seats install straight into your existing mountings, offering a good cost effective seat that looks the part and is the part.

With a very good all round comfort level and twin stalk adjustable headrest that can be easily removed with the quick release retaining tabs. the Hi-Back Extreme can also be easily fitted with internal seat heaters and pneumatic back lumbars, although the seats offer superb lumbar support and moderately raised sides to the cushion shape giving that much needed extra hold and support from the old leaf spring ride. The added benefit of seat heaters goes without saying!

Please note that the seat backs are all steel internal frames with adjustable headrests and internal diaphragms for a solid and safe seat.

The seat bases will fit in exactly the same way as the original seats fitted, you may or may not require Leather straps for seat back or base this will depend very much on which vehicle they are to be installed. If you have adjustable seat frames (on sliders) then you will not require any base straps if your cushions are loose then a 140mm leather strap will be required if you are not able to remove and utilise the old one.

The seat backs mount into the original frames with 1/4 UNF Collar pivot bolts with plastic wear washers and locking bolt depending on the frame in-situ, these are supplied new with the seats.

You may require a Leather retaining strap for the seat back if you don't have slider units to keep the seat back upright when not in use, for this you would require 100mm leather straps.

You may also need bulkhead buffers to fit either to the back of the seat where required or, if preferred, to the bulkhead or seat back bar in 109 station wagons.

Available in a wide range of materials these Extreme MKII seats make a big difference to the seating posture and ride, without pushing you forward !

rayleigh
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£228.38 ex VAT£274.06 inc UK VAT
Quantity
Launching the new Hi-Back EXTREME MKII.

Offering an easy upgrade for the earlier Series and MOD early Defenders.

These new Hi-Back Extreme seats install straight into your existing mountings, offering a good cost effective seat that looks the part and is the part.

With a very good all round comfort level and twin stalk adjustable headrest that can be easily removed with the quick release retaining tabs. the Hi-Back Extreme can also be easily fitted with internal seat heaters and pneumatic back lumbars, although the seats offer superb lumbar support and moderately raised sides to the cushion shape giving that much needed extra hold and support from the old leaf spring ride. The added benefit of seat heaters goes without saying!

Please note that the seat backs are all steel internal frames with adjustable headrests and internal diaphragms for a solid and safe seat.

The seat bases will fit in exactly the same way as the original seats fitted, you may or may not require Leather straps for seat back or base this will depend very much on which vehicle they are to be installed. If you have adjustable seat frames (on sliders) then you will not require any base straps if your cushions are loose then a 140mm leather strap will be required if you are not able to remove and utilise the old one.

The seat backs mount into the original frames with 1/4 UNF Collar pivot bolts with plastic wear washers and locking bolt depending on the frame in-situ, these are supplied new with the seats.

You may require a Leather retaining strap for the seat back if you don't have slider units to keep the seat back upright when not in use, for this you would require 100mm leather straps.

You may also need bulkhead buffers to fit either to the back of the seat where required or, if preferred, to the bulkhead or seat back bar in 109 station wagons.

Available in a wide range of materials these Extreme MKII seats make a big difference to the seating posture and ride, without pushing you forward !

techno
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£221.31 ex VAT£265.57 inc UK VAT
Quantity
Series II & III - Lightweight Seat Back

The lightweight seat back attaches to the bulk head with vinyl panels with eyelet fixing points. All 3 seat backs if required are the same size. The lightweight utilises the standard outer seat base.

12 Volt: All 3 seats fitted in the front and all 3 seat backs are the same

24 Volt: Only two seats in the front and both backs are the same

black_vinyl
-
In stock
Most orders ship today!
£28.28 ex VAT£33.94 inc UK VAT
Quantity
Series II & III - Lightweight Seat Back

The lightweight seat back attaches to the bulk head with vinyl panels with eyelet fixing points. All 3 seat backs if required are the same size. The lightweight utilises the standard outer seat base.

12 Volt: All 3 seats fitted in the front and all 3 seat backs are the same

24 Volt: Only two seats in the front and both backs are the same

grey_vinyl
-
Usually in stock at our supplier, allow 4 to 6 weeks for delivery.
£28.28 ex VAT£33.94 inc UK VAT
Quantity
Series 2 & 3

Dimensions: 450mm X 465mm

Material: Black powder coated steel
-
In stock
Most orders ship today!
£65.00 ex VAT£78.00 inc UK VAT
Quantity
Customer Comments
"Effective website. Easy order process. Reasonable shipping charge. Value your 'how to' YouTube vids too!." Customer Comment
Product Description

Series 2 and 3 Standard Front Seats
Standard Front Seating

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

Please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Exmoor Trim now produce a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame - an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts, if you require leather retaining straps then these are available separately.