Rover 200 Exhaust System - 1800

Order your Rover 200 Exhaust System - 1800 ⛽ Fast, worldwide delivery ✈ British car experts ♚ PayPal & other payment options ⚑
Illustrated Items Not Listed Are Currently Not Available
Part No.: GRID001384

Prices displayed in: GB Pound Euro US Dollar AUD NZD
4
Please note studs no longer supplied with the catalyst
Replace with 6 each FS110351 bolts & 6 ESR2034 nuts
In stock
Most orders placed now ship next business day!
£158.10 ex VAT£189.72 inc UK VAT
Quantity
4

Proper Break-In Can Prevent Future Problems

Matting Wrapped around Substrate

Figure 1 - Matting Wrapped around Substrate (Click to enlarge)

Converter Matting

Figure 2 - Converter Matting (Click to enlarge)

Matting Expansion Chart

Figure 3 - Matting Expansion Chart (Click to enlarge)

A replacement catalytic converter needs to undergo a proper “break-in” procedure to ensure that it will con­tinue to work the way it is supposed to and deliver the required emissions reliability and long service life. If the converter is not warmed-up properly (broken-in), the substrate inside could be adversely affected and eventually cause the converter to fail down the road.

A proper break-in period is required for a correct installation:

The problem typically occurs when a shop installs the converter and immediately returns the vehicle to the customer without warming up (breaking-in) the cat.

The customer drives away and runs the car for a long distance or lets the vehicle idle for an extended period of time. Under these conditions, the matting, which is intended to secure the substrate will not expand properly and hold it in place.

Converter matting is made from a mineral called vermicu­lite, which is held together by a fiber mat and an organic binder. This matting is wrapped around the converter’s ceramic brick (See Figure 1).

The matting is installed in the converter in an unexpanded state (See Figure 2). During the first heat up, the fiber mat and binder burn off and the mat­ting actually gets looser before it expands to fill the converter cavity and hold the ceramic brick in place (See Figure 3). If that warm up is not done properly, the brick can come loose and get damaged. That rattle you might hear inside the converter shell is a sure telltale for this problem. 

Warm up that cat first.

The best way to avoid this service issue and potential war­ranty problems is to include the warm-up period as a key part of your overall converter installation procedure. This heating cycle will allow for correct matting expansion.

Here are suggested steps for a proper break-in or warm-up:

  • Start engine but do not touch the accelerator pedal.
  • Idle the engine and allow it to warm up slowly.
  • After 5 minutes, increase the engine speed to 2500 RPM.
  • Hold at 2500 RPM for 2 minutes.
  • Allow engine to cool down.
  • Road test vehicle to confirm correct installation.
Usually in stock at our supplier, allow 1 week for delivery
£127.00 ex VAT£152.40 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£76.00 ex VAT£91.20 inc UK VAT
Quantity
4
To VIN YD522572 (2000)
(also suitable for Lotus Elise MK1)

Stainless Steel Sports Catalyst - MGF to YD522572
Out of stock, expected soon Jun 01, 2020. Add to cart and Back Order
£300.00 ex VAT£360.00 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£70.00 ex VAT£84.00 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£1.95 ex VAT£2.34 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£1.45 ex VAT£1.74 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£3.15 ex VAT£3.78 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£1.95 ex VAT£2.34 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£1.95 ex VAT£2.34 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£1.95 ex VAT£2.34 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£4.29 ex VAT£5.15 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£1.95 ex VAT£2.34 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£4.29 ex VAT£5.15 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£1.95 ex VAT£2.34 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£4.29 ex VAT£5.15 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£1.95 ex VAT£2.34 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£5.80 ex VAT£6.96 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£1.75 ex VAT£2.10 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£0.20 ex VAT£0.24 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£0.40 ex VAT£0.48 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£1.20 ex VAT£1.44 inc UK VAT
Quantity
In stock
Most orders placed now ship next business day!
£0.64 ex VAT£0.77 inc UK VAT
Quantity

Related Items

Carplan Exhaust Repair & Jointing Paste 250Gm - GCH112
Carplan Exhaust Repair & Jointing Paste 250Gm - GCH112
£3.10 ex VAT£3.72 inc UK VAT
DEI Thermo-Tec Exhaust Insulating Wrap - RX1382
DEI Thermo-Tec Exhaust Insulating Wrap - RX1382
£59.95 ex VAT£71.94 inc UK VAT
DEI Thermo-Tec Snap-Strap Exhaust Wrap Installation Kit - RX1383
DEI Thermo-Tec Snap-Strap Exhaust Wrap Installation Kit - RX1383
£39.50 ex VAT£47.40 inc UK VAT
Customer Comments
"EXCELLENT service prompt delivery, and no problem returning parts incorrectly ordered," Customer Comment
Product Description

Rover 200 Exhaust System - 1800