Rover 200/25/MG ZR Cylinder Head, Camshaft - 1600 Petrol 16V DOHC

Order your Rover 200/25/MG ZR Cylinder Head, Camshaft - 1600 Petrol 16V DOHC ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Illustrated Items Not Listed Are Currently Not Available
Part No.: GRID001192

Prices displayed in: GB Pound Euro US Dollar AUD NZD
3
Used with the exhaust camshaft only.
Originally supplied with the camshaft, although depending on available stock this may now not be the case. 
£1.00 ex VAT£1.20 inc UK VAT
Quantity
5
Used with the exhaust camshaft only.
Originally supplied with the camshaft, although depending on available stock this may now not be the case. 
£1.00 ex VAT£1.20 inc UK VAT
Quantity
5
Used with the exhaust camshaft only.
Originally supplied with the camshaft, although depending on available stock this may now not be the case. 
£1.00 ex VAT£1.20 inc UK VAT
Quantity
£3.25 ex VAT£3.90 inc UK VAT
Quantity
£7.93 ex VAT£9.52 inc UK VAT
Quantity
£2.20 ex VAT£2.64 inc UK VAT
Quantity
7
Developed for the EU4 compliant version of the K Series.
Use with alloy sump and oil rail LCN000140L
For the Multi Layered Steel (MLS) gasket to seal correctly it is important that the cylinder liner heights are at least 4 thou (0.1mm) above the block AND are all even.  A shim kit LCJ000050SHIM (containing 4 x 0.1mm shims) is available if the liners have sunk below the recommended heights
£65.00 ex VAT£78.00 inc UK VAT
Quantity
7
Use with Oil Rail LCN000140L
For the Multi Layered Steel (MLS) gasket to seal correctly it is important that the cylinder liner heights are at least 4 thou (0.1mm) above the block AND are all even.  A shim kit LCJ000050SHIM (containing 4 x 0.1mm shims) is available if the liners have sunk below the recommended heights
£20.00 ex VAT£24.00 inc UK VAT
Quantity
7
Note: This is the old design gasket , for the multi-layer gasket use part number LVB500190A and
for the multi- layer gasket plus new strengthened oil rail and bolts use part number ZUA000530.
£29.95 ex VAT£35.94 inc UK VAT
Quantity
£7.00 ex VAT£8.40 inc UK VAT
Quantity
8
BGA uprated head bolt kit.

10.9 grade bolts offer superior strength over standard. Must fitted as a complete set of 10.

For alloy sump engines use with upgraded, multi layer head gasket LVB90025A and strengthened oil rail LCN000140L for the most effective solution for your K-Series.
£47.50 ex VAT£57.00 inc UK VAT
Quantity
Usually in stock at our supplier, allow 1 week for delivery
£475.00 ex VAT£570.00 inc UK VAT
Quantity
£60.00 ex VAT£72.00 inc UK VAT
Quantity
9
1.8 engines up to eng. nos. J31 590355 & J32 568018 being fitted with this camshaft cover will also require one of each LLH102380 manifold breather hose and LLH102390 throttle body breather hose to replace the original hoses on the engine.
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£133.11 ex VAT£159.73 inc UK VAT
Quantity
£13.50 ex VAT£16.20 inc UK VAT
Quantity
£7.90 ex VAT£9.48 inc UK VAT
Quantity
£0.64 ex VAT£0.77 inc UK VAT
Quantity
£0.42 ex VAT£0.50 inc UK VAT
Quantity
14
MGF & MG TF, Rover 200/25/MG ZR, Rover 400/45/MG ZS, Rover 75/MG ZT

1.8 manual non-VVC and 1.8 VVC from VIN YD522573 on, all 1.6 engines and 1.8 automatic engines.
£12.50 ex VAT£15.00 inc UK VAT
Quantity
£495.00 ex VAT£594.00 inc UK VAT
Quantity
19
The factory fitted one of two sizes of valve guide in a cylinder head, depending on head machining accuracy.  Standard size guides are plain in profile, whereas oversize guides (referred to by the factory as ‘salvage’ guides) are grooved and stepped for easy identification later when service repairs are carried out.  When renewing valve guides, you must first identify your old guides and ensure that replacements of the same type are ordered and fitted.
19
The factory fitted one of two sizes of valve guide in a cylinder head, depending on head machining accuracy.  Standard size guides are plain in profile, whereas oversize guides (referred to by the factory as ‘salvage’ guides) are grooved and stepped for easy identification later when service repairs are carried out.  When renewing valve guides, you must first identify your old guides and ensure that replacements of the same type are ordered and fitted.
20
The factory fitted one of two sizes of valve guide in a cylinder head, depending on head machining accuracy.  Standard size guides are plain in profile, whereas oversize guides (referred to by the factory as ‘salvage’ guides) are grooved and stepped for easy identification later when service repairs are carried out.  When renewing valve guides, you must first identify your old guides and ensure that replacements of the same type are ordered and fitted.
20
The factory fitted one of two sizes of valve guide in a cylinder head, depending on head machining accuracy.  Standard size guides are plain in profile, whereas oversize guides (referred to by the factory as ‘salvage’ guides) are grooved and stepped for easy identification later when service repairs are carried out.  When renewing valve guides, you must first identify your old guides and ensure that replacements of the same type are ordered and fitted.
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£0.60 ex VAT£0.72 inc UK VAT
Quantity
28
Kent Cams uprated valve springs - 15% stronger than standard.

When upgrading to a performance camshaft, standard springs are often unable to cope with the additional movement generated by the increased valve lift. Kent Cams valve springs offer superior travel and stiffness to optimise valve motion.
Usually in stock at our supplier, allow 1 week for delivery
£155.00 ex VAT£186.00 inc UK VAT
Quantity
28
Kent Cams uprated valve springs - 15% stronger than standard.

When upgrading to a performance camshaft, standard springs are often unable to cope with the additional movement generated by the increased valve lift. Kent Cams valve springs offer superior travel and stiffness to optimise valve motion.
Usually in stock at our supplier, allow 1 week for delivery
£155.00 ex VAT£186.00 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£25.05 ex VAT£30.06 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£2.43 ex VAT£2.92 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£4.74 ex VAT£5.69 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£0.60 ex VAT£0.72 inc UK VAT
Quantity
Shown as In Stock at our supplier.
Usually ships in 2-3 working days.
£3.60 ex VAT£4.32 inc UK VAT
Quantity
Customer Comments
"Excellent site well laid out and prices are very good." Customer Comment
Product Description

Rover 200/25/MG ZR Cylinder Head, Camshaft - 1600 Petrol 16V DOHC